• 대한방사선방어학회:학술대회논문집
• /
• 2011.04a
• /
• pp.166-167
• /
• 2011

• Proceedings of the KAIS Fall Conference
• /
• 2005.05a
• /
• pp.321-323
• /
• 2005

중수숭급기 충진재의 부식원인인 염분 유입 및 열분해로 인한 산화물 형성 과정 조사를 위해 zeolite 의 열분해 및 염분 유입을 조사하였다. 그리고 원자력 발소의 dryer 모사 장치를 만들어 열분해 특성 조사 실험을 하였다. zeolite 열분해 특성 조사 결과 zeolite에 고온의 증기를 통과시키면 가수분해가 일어나 구조가 바뀌게 되며, $500\~700^{\circ}C$에서 완전히 열분해 된다. 그리고 열분해가 일어난 zeolite에 염분이 유입되면, zeolite의 $H^+$와 염분의 $Na^+$ 가 자리바꿈을 하게 되고, 수중에 $H^+$ 와 $Cl^-$ 가 존재하여 HCl이 형성될 것으로 조사되었고, 실험 결과 pH가 4.5, 4.53, 4.72, 4.64, 4.86, 5.03, 4.61로 낮게 측정되었다.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2003.05b
• /
• pp.144-148
• /
• 2003

알루미나볼 위에 Titanium tetraisopropoxide(TTIP)를 원료로, 화학기상증착법으로 제조된 $TiO_{2}/Al_{2}O_{3}$ 볼을 이용하여 벤젠의 기상 광 분해 실험을 실시하였다. 기상분해 과정의 연속적 측정을 위하여 순환식의 반응장치를 자체 제작하였으며, PID(Photo Ionization Detector)방식의 VOCs meter를 이용하여 광조사에 의한 벤젠의 분해율을 실시간으로 측정하였다. 기상의 벤젠과 $TiO_2/Al_{2}O_{3}$ 볼의 원활한 흡착을 위해 30분간 암반응 시킨 후 광분해율을 측정한 결과 광조사에 의한 분말표면에 흡착된 VOCs의 탈착에 의한 초기 농도증가 현상이 공통적으로 측정되었으며, 흡착 면적이 작을수록 농도 증가 또한 낮게 측정되었다. 또한 최적조건을 기준으로 실시한 분해 실험 결과 60ppm이상의 고농도 영역에서는 VOCs의 분해가 비교적 느리게 진행되었지만, 60ppm이하의 저농도 영역에서는 급속한 VOCs의 분해가 측정되었다. 마찬가지로 반응 표면적이 넓을수록, 광원이 많을수록 그리고 광분해에 사용된 자외선 램프의 강도가 클수록 광반응에 의한 벤젠의 분해율이 증가하였다.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.16 no.3
• /
• pp.29-37
• /
• 2008

The objective of this research is to evaluate the optimum treatment methods for disposal sludge cake at different temperatures and periods of time. The disposal dehydrated sewage cake used in this study was obtained from N wastewater treatment plant in the P City. This system consists of continuous conveyer thermal dryer and pyrolysis. The continual conveyer thermal dryer was operated to evaluate the optimum conditions with temperature settings, ranges from 130 to $180^{\circ}C$, loading rates of 650~750 kg/hr and operating times of 110~120 minutes. The continual pyrolysis was also operated to evaluate the optimum conditions with temperature settings, ranges from 650 to $750^{\circ}C$, loading rates of 100~158 kg/hr and operating times of 20~40 minutes. The sewage sludge cake has a moisture content of 78~80% (wt) which decreased up to 1~3%(wt) resulted in breaking of cell wall after operating the continuous conveyer thermal dryer and pyrolysis. Important parameters which were operating times, moisture contents, loading rates, conveyer velocities and rotary velocities effects on the thermal kinetics and dynamics were investigated to evaluate the optimum conditions for the continual thermal dryer and pyrolysis.

• Journal of the Korean Society of Radiology
• /
• v.14 no.4
• /
• pp.477-486
• /
• 2020

The purpose of this study was to evaluate the effects of reconstruction filters, X-ray source trajectories and intervals in the quality of digital tomosynthesis (DT) images, and the results was clinically validated. The filtered back-projection was implemented by using Ramp, Shepp-Logan, Cosine, Hamming, Hann and Blackman filters, and the X-ray source trajectories were simulated with 1 × 36, 2 × 18, 3 × 12, 4 × 9 and 6 × 6 arrays. The X-ray source intervals were 5, 10, 20, 30 and 40 mm. The depth resolution, spatial resolution and noise of DT image were evaluated by measuring artifact spread function (ASF), full width at half maximum (FWHM) and signal-to-noise ratio (SNR), respectively. The results showed that the spatial resolution and noise properties of DT images were maximized by the Ramp and Blackman filters, respectively, and the depth resolution and noise properties of the DT images obtained with a 1 × 36 X-ray source trajectory were superior to the other trajectories. The depth resolution and noise properties of DT images improved with an increase of X-ray source intervals, and the high X-ray source intervals degraded the spatial resolution of DT images. Therefore, the characteristics of DT images are highly dependent on reconstruction filters, X-ray source trajectories and intervals, and it is necessary to use optimal imaging parameters in accordance with diagnostic purpose.

• Journal of Radiation Protection and Research
• /
• v.37 no.4
• /
• pp.213-218
• /
• 2012

Alpha spectrometry has been typically used for determination of the uranium isotopes in soil. For a number of uranium analysis in soil samples, rapid sample digestion with limited quantities of mixed acid containing HF will give a contribution for effective management of uranium analysis. Microwave digestion system is evaluated for rapid sample digestion using reference uranium soil (IAEA-375 soil). For completion of 0.5 g of soil digestion by microwave, 3 ml of HF in a 10 ml of mixed acid is minimum requirement volume for completed soil digestion for 80 minutes. Microwave digestion is timely effective techniques for uranium measurement using alpha spectrometry compared to the other methods (open vessel digestion, closed vessel digestion) due to rapid sample digestion. In addition, it can be reduced the occurrence of hazardous substances by minimizing the amount of HF.

• Journal of the Korean Society of Radiology
• /
• v.12 no.1
• /
• pp.85-91
• /
• 2018

Computed tomography, which obtains section images from reconstruction process using projection images, has been applied to various fields. The spatial resolution of the reconstructed image depends on the device used in CT system, the object, and the reconstruction process. In this paper, we investigates the effect of the number of projection images and the pixel size of the detector on the spatial resolution of the reconstructed image under the parallel beam geometry. The reconstruction program was written in Visual C++, and the matrix size of the reconstructed image was $512{\times}512$. The numerical bar phantom was constructed and the Min-Max method was introduced to evaluate the spatial resolution on the reconstructed image. When the number of projections used in reconstruction process was small, artifact like streak appeared and Min-Max was also low. The Min-Max showed upper saturation when the number of projections is increased. If the pixel size of the detector is reduced to 50% of the pixel size of the reconstructed image, the reconstructed image was perfectly recovered as the original phantom and the Min-Max decreased as increasing the detector pixel size. This study will be useful in determining the detector and the accuracy of rotation stage needed to achieve the spatial resolution required in the CT system.

• Proceedings of the KIEE Conference
• /
• 2011.07a
• /
• pp.1181-1182
• /
• 2011

본 논문은 선박에서 발생하는 여러 해양오염원 중에서 선박평형수에서 야기되는 해양생태계의 오염 문제를 해결하기 위하여 사용되는 방법중에서 가장 효율적인 방식인 전기분해 방식에 대한 시스템 설계에 관한 연구로서, IMO의 밸러스트수 관리시스템 승인을 받기 위한 첫 번째 단계인 Basic Approval(랩테스트)을 받기 위한 전기분해 전원장치를 설계하고 시뮬레이션으로 검증하였다.

• Proceedings of the KIEE Conference
• /
• 2006.07a
• /
• pp.244-245
• /
• 2006

기존의 전력 계통에서 전기적인 거리는 서로 다른 두 모선 사이의 물리적인 관계를 추정하여 분할하는 방법으로서, 인접한 영역의 상호작용을 최소화하여 분할하는 방법을 사용하였다. 그러나 영역 간 상호 작용의 최소화를 고려했음에도 인접한 영역에 더 큰 영향을 미치는 것을 확인 할 수 있었다. 본 논문에서는 이러한 문제점을, 파이션을 이용해서 분석하였고, 인접한 영역간의 상호 작용을 고려하여 기존의 전력계통 분할 방법 보다 향상된 분할 방법을 파이션을 사용하여 제시하였다.

• Proceedings of the Korean Society of Toxicology Conference
• /
• 2003.05a
• /
• pp.86-86
• /
• 2003

국내에서 식용되고 있는 패류 내의 중금속 오염도를 검색하기 위하여 5, 6, 7, 8, 10, 12월 동안 12종, 70개의 시료를 수집하였다. 젖은 시료 약 3g에 질산과 과산화수소를 가하여 마이크로파 분해 장치로 습식분해하고 희석하여 ICP-MS, 원자흡광 광도계, 원자 형광 광도계로 분석 하였다. 분석 원소는 Hg, Pb, Cd, As를 포함하여 13종이며 계절에 따른 중금속 오염도의 변화양상을 보았다. (중략)