• Archives of design research
• /
• v.17 no.3
• /
• pp.221-230
• /
• 2004

Design textbooks for general education bring our attention to the education of design as a part of whole education. In this vein, this thesis tried to analyze and discuss on the current status of design education contents included in the 7th educational curriculum of the Art & Life. This study had a historical review of the contents of arts education as well as a review of theoretical contents in art education. Also this thesis analyzed five types of Art & Life text books currently used at high schools with weight given to the design and to the status of pictorial coverage in the text books. Finally, the thesis presented problems of design education through a comparative analysis of high school arts education and design education. Through the analysis, inequality of design contents in education was reported. It was clearly attributable to the backgrounds of text book writers. For example, authors with graphic design backgrounds tended to lack product and environment design concepts, while hand craft section of text books all showed a biased contents towards traditional Korean arts. In the analysis of pictorial coverage, similar to the composition of academic contents, coverage was concentrated in the graphic design areas; inequality in quantity of pictures found with a ratio of 1 to 4. In terms of areas of arts, design contents in text books were concentrated only in arts creation chapters among the 3 major areas of arts appreciation, understanding, and creation. Design education is attained in an atmosphere of creativity and the provision of ample teaching material. It is because diverse contents will generate the development of arts. When compared to design education curriculum of U.S. and Japan, these creativity put their focus of design education in the understanding and emotional contacts, so that every application is easily attained. In terms of expression learning, creativity and diversity of material are emphasized. From Kindergarten to middle, and high school periods, apparently the care contents of deign is emphasized. A textbook in the 7th education curriculum is one of the sources for education. In designing text books, learning process should be emphasized following subjects and natures of arts so that creativity can be achieved. Therefore, a systematic approach for design research and educational development for material would be needed in textbook design.

• Korean Journal of Environmental Agriculture
• /
• v.30 no.4
• /
• pp.409-413
• /
• 2011

BACKGROUND: Cereals, especially rice is the staple food of oriental nations and because it is very important for Korean food, to determine the extent of nutrient losses due to milling, we analyzed the fatty acid using by GC-FID(Gas Chromatography-Flame Ionization Detector). Experimented rice cereals were rice, glutinous rice, Heuinchalssalbori, Seodunchalbori, Saessalbori, Keunalbori No.1, barnyard millet produced in Korea. METHODS AND RESULTS: After milling, the contents of fatty acids in the rice, glutinous rice, Heuinchalssalbori, and Seodunchalbori, Keunalbori No.1 rather decreased, but in the Saessalbori, and barnyard mille increased. Particularly, fatty acid content of the rice decreased from 24.8 mg/g to 6.4 mg/g, glutinous rice decreased from 29.4 mg/g to 11.7 mg/g after milling. There were also significant changes in the compositions of fatty acid among samples. Stearic acid ($C_{18:0}$) increased from 5% to 15%, but oleic acid ($C_{18:1}$) and linoleic acid ($C_{18:2}$) decreased in the rice after milling. CONCLUSION(s):In the brown rice, 11 different types of fatty acids were detected, and its highest content was found in grains. However, milled grain was observed only seven fatty acids in the case of rice. This result insisted that a portion of the lipid layer was significantly lost during the milling operation in rice.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.8
• /
• pp.240-247
• /
• 2017

The increased investigation of the cerebral arteries with magnetic resonance angiography has resulted in an increase in the identification of unruptured intracranial aneurysms (UIAs). Knowledge of the distribution and factors associated with UIAs might be helpful for understanding the pathological mechanism of unruptured aneurysms. This study examined patients who visited a health care center and had a health examination from January 2007 to December 2016. Subjects who underwent magnetic resonance angiography with a health examination at the Health Screening were enrolled in this study. The incidence and risk factors of UIAs (age, sex, hypertension, diabetes mellitus, smoking, alcohol, and coronary artery disease) were investigated by comparing the size (more than 3 mm vs. less than 3 mm) and multiple aneurysm (single vs. multiple aneurysms). The frequency of aneurysm according to the site was also analyzed. Among the 187166 subjects, who received a health examination, 18954 underwent magnetic resonance angiography. Of them, 367 (1.93%) had UIAs. A comparison of the size of more than 3 mm and less than 3 mm showed that the mean age of the more than 3 mm group of patients was significantly higher than the other size groups (more than 3 mm $57.16{\pm}8.47$ vs. less than 3 mm $55.12{\pm}8.19$; p=0.07). High-density lipoprotein was significantly higher in the more than 3 mm group than in the less than 3 mm($55.95{\pm}16.03$ vs. less than 3 mm $50.85{\pm}13.65$; p=0.007). Hypertension was significantly higher in the multiple aneurysm group (single 153 in 399 (38.3%) VS multiple 19 in 35 (54.3%); p=0.065). An aneurysm of less than 3 mm in size was frequent in the distal internal carotid artery (34.3%) and MCA-bifurcation (16.4%) (p=0.003). Aneurysms of more than 3 mm were frequent in the distal internal carotid artery (43.4%) and MCA-bifurcation (13.4%), and anterior communicating artery (13.4%) (p=0.003). The difference in size and single or multiple aneurysm revealed other risk factors. These risk factors suggest that degenerative and hemodynamic disorders may lead to the presence of aneurysms.

• Journal of Intelligence and Information Systems
• /
• v.16 no.3
• /
• pp.121-145
• /
• 2010

University timetabling depending on the educational environments of universities is an NP-hard problem that the amount of computation required to find solutions increases exponentially with the problem size. For many years, there have been lots of studies on university timetabling from the necessity of automatic timetable generation for students' convenience and effective lesson, and for the effective allocation of subjects, lecturers, and classrooms. Timetables are classified into a course timetable and an examination timetable. This study focuses on the former. In general, a course timetable for liberal arts is scheduled by the office of academic affairs and a course timetable for major subjects is scheduled by each department of a university. We found several problems from the analysis of current course timetabling in departments. First, it is time-consuming and inefficient for each department to do the routine and repetitive timetabling work manually. Second, many classes are concentrated into several time slots in a timetable. This tendency decreases the effectiveness of students' classes. Third, several major subjects might overlap some required subjects in liberal arts at the same time slots in the timetable. In this case, it is required that students should choose only one from the overlapped subjects. Fourth, many subjects are lectured by same lecturers every year and most of lecturers prefer the same time slots for the subjects compared with last year. This means that it will be helpful if departments reuse the previous timetables. To solve such problems and support the effective course timetabling in each department, this study proposes a university timetabling support system based on two phases. In the first phase, each department generates a timetable template from the most similar timetable case, which is based on case-based reasoning. In the second phase, the department schedules a timetable with the help of interactive user interface under the timetabling criteria, which is based on rule-based approach. This study provides the illustrations of Hanshin University. We classified timetabling criteria into intrinsic and extrinsic criteria. In intrinsic criteria, there are three criteria related to lecturer, class, and classroom which are all hard constraints. In extrinsic criteria, there are four criteria related to 'the numbers of lesson hours' by the lecturer, 'prohibition of lecture allocation to specific day-hours' for committee members, 'the number of subjects in the same day-hour,' and 'the use of common classrooms.' In 'the numbers of lesson hours' by the lecturer, there are three kinds of criteria : 'minimum number of lesson hours per week,' 'maximum number of lesson hours per week,' 'maximum number of lesson hours per day.' Extrinsic criteria are also all hard constraints except for 'minimum number of lesson hours per week' considered as a soft constraint. In addition, we proposed two indices for measuring similarities between subjects of current semester and subjects of the previous timetables, and for evaluating distribution degrees of a scheduled timetable. Similarity is measured by comparison of two attributes-subject name and its lecturer-between current semester and a previous semester. The index of distribution degree, based on information entropy, indicates a distribution of subjects in the timetable. To show this study's viability, we implemented a prototype system and performed experiments with the real data of Hanshin University. Average similarity from the most similar cases of all departments was estimated as 41.72%. It means that a timetable template generated from the most similar case will be helpful. Through sensitivity analysis, the result shows that distribution degree will increase if we set 'the number of subjects in the same day-hour' to more than 90%.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.14 no.3
• /
• pp.1234-1244
• /
• 2013

This study aimed to analyze the ten years cancer incidence based on diagnosis years 2000-2009, and to evaluate the quality of cancer registry in Daejeon City and Chungcheongnam-Do, Korea. Crude incidence rate and age-standardized incidence rate (ASR) in these two regions were compared, and validity of incidence data was assessed by three indicators; age unknown (Age UNK%), histological verification (HV%), and death certificate only (DCO%). Mortality/incidence ratio (M/I ratio) was used to evaluate completeness of incidence data. Incidence rate differences were assessed using Poission distribution and calculated their 95% confidence interval of ASR, and those by sex, age, and region were compared by incidence rate curve. As a result, the highest cancer site during 2000-2009 was stomach in both regions, and incidence prpportion were 18.8% in Daejeon, 21.5% in Chungnam. The overall cancer incidence was higher in males than in females, and ASR of total cancer in Daejeon increased 0.6% (from 322.1 to 323.9 per 100,000) for men and 60.3% (from 203.9 to 326.8) for women, that in Chungnam increased 14.3% (from 294.7 to 336.9) for men and 70.7% (from 156.5 to 267.1) for women. The Age UNK% during 2000-2009 were 0.0% in both regions. MV% for men was increased from 71.8% to 88.5% and that for women was increased from 78.1% to 93.2%. DCO% for men was decreased from 6.4% to 0.7% and that for women was decreased from 5.4% to 0.8%. M/I ratio was ranged from 15.3% to 62.1% and can be evaluated fairy good registration.

• Journal of radiological science and technology
• /
• v.29 no.2
• /
• pp.83-92
• /
• 2006

Based on the data of cervical cancer patients who were treated by the radiotherapy with concurrent chemotherapy at the radiation oncology department of National Cancer Center from January 2002 to February 2003, we have studied the method recommended by ICRU 38 to maximize the prescription dose to the planing target volume (PTV) with minimizing the dose to surrounding normal organs. Clinical stage of the patients are 1 patient for stage IB, 3 patients for IIA, 19 patients for IIB, 3 patients for IIIA, 3 patients for IIIB and 1 patient for IV. All patients took the MRI before treatment and the maximum size of the gross tumor volume were under 4cm for 17 patients and from 4 cm to 6 cm for 12 patients and above 6 cm for 1 patient. The results show that while the irradiated volume can be reduced with optimized dose distribution using PTV treatment planning (p<0.0001) when the remained tumor size is small, the surrounding normal organs will receive unnecessarily large dose when the irradiated tumor volume is relatively large. This is because there is some limitation in controling the intensity of radiation in Fletcher Williamson Applicator. To overcome the limit of applicator and to achieve the optimal dose distribution, we have virtually applied 4 needles with Fletcher Williamson Applicator for 10 patients who have relatively large tumor and studied the change in dose distribution before and after application. The results show that this new virtual treatment plan reduces the volume covered by 100 % isodose (p=0.0608, p=0.0607) and reduces the dose of normal organs (p=0.0162, p=0.008). This evidence suggest that this method is superior than the currently used method such as PTV treatment and ICRU treatment.

• Korean Journal of Soil Science and Fertilizer
• /
• v.38 no.5
• /
• pp.259-268
• /
• 2005

Most of the tailings have been left without any management in their mines and have become the main source of serious environmental problems in nearby groundwater, stream and cultivated lands. To compare fractionation and potential mobility of heavy metals in tailings and paddy soils near abandoned 10-metalliferous mines in Korea, the distribution and chemical fractions of heavy metal and their mobility in relation to chemical compositions were investigated. The pollution index of heavy metal in mine tailing calculated with the permissible levels were in the order Cheongyang>Dogok>Beutdeun>Baegwoul mine, which were considered sufficient to raise environmental problems. The rates of 0.1M-HCl extractable Cd, Cu, Pb, Zn, and Ni to total content in paddy soils were 49.1, 50.7, 26.8, 18.4 and 2.9%, respectively, and their rates of heavy metals in paddy soils were higher than that of mine tailing. Dominant chemical forms of heavy metals in tailings were sulfide and residual form (63-91%), specially, the exchangeable portion of Cd (21%) was relatively higher than that of other metals in paddy soils. The mobility factor of heavy metals in tailings and paddy soils was in the order Cd>Zn>Cu>Pb, and the mobility factor in tailing varied considerably among the mines. The potential mobility of heavy metals in tailings showed significant positive correlation with water-soluble $Al^{3+}$ and $Fe^{3+}$ contents, while in paddy soils, it correlated negatively with soil pH values.

• Korean Journal of Soil Science and Fertilizer
• /
• v.28 no.3
• /
• pp.227-232
• /
• 1995

The model equations including scaling factors to estimate the soil water characteristics curve(SWCC) without direct measurement of soil water tension were developed. Scaling were applied to a data set of soil water content, soil water tension, particle size distribution, and OM contents of the 134 soil samples with the 10 soil textural classes. The capability of the model equations was tested on another 205 soil samples. The parameter, ${\theta}^*$, of soil water contents was used by scale transformation as follows : ${\theta}^*=[{\theta}i-{\theta}(1.5MPa)]$/$[{\theta}(10KPa)-{\theta}(1.5MPa)]$ Using ${\theta}^*$ a model equation to estimate SWCC, which was applicable to all textural classes, was developed as follows: $H(0.1MPa)=0.13{\cdot}({\theta}^*)^{-2.04}$. Other model equations to estimate the water content at the soil water tension of 10KPa [${\theta}(10KPa)$] and 1.5MPa [${\theta}(1.5MPa)$], which are required to ${\theta}^*$ were developed by using scale factors of sand(S) and silt(Si) content and organic matter content(OM) as foilows : ${\theta}(10KPa)=26.80-3.99ln[S]+2.36{\sqrt{[Si]}}+2.88[OM]$ ($R=0.81^{**}$) ${\theta}(1.5KPa)=15.75-2.86ln[S]+0.55{\sqrt{[Si]}}+0.70[OM]$ ($R=0.76^{**}$) The measured and estimated values of ${\theta}(1/30MPa)$ on the 205 soil samples were highly correlated on 1 : 1 corresponding line with $R=0.85^{**}$.

• Korean Journal of Soil Science and Fertilizer
• /
• v.41 no.2
• /
• pp.126-136
• /
• 2008

Tobacco plants grown in pots by sand culture for 70 days after transplanting were used to evaluate the sensing distance and measurement efficiency of ground-based remote sensors. The leaf distribution of tobacco plant and sensing distance from the sensors to the target leaves were controlled by two removal methods of leaves, top-down and bottom-up removal. In the case of top-down removal, the canopy reflectance was measured by the sensor located at a fixed position having an optimum distance from the detector to the uppermost leaf of tobacco every time that the higher leaves were one at a time. The measurement of bottom-up removal, a the other hand, was conducted in the same manner as that of the top-down removal except that the lower leaves were removed one by one. Canopy reflectance measurements were made with hand held spectral sensors including the active sensors such as $GreenSeeker^{TM}$ red and green, $Crop\;Circle\;ACS-210^{TM}$ red and amber, the passive sensors of $Crop\:Circle^{TM}$, and spectroradiometer $SD2000^{TM}$. The reflectance indices by all sensors were generally affected by the upper canopy condition rather than lower canopy condition of tobacco regardless of sensor type, passive or active. The reflectance measurement by $GreenSeeker^{TM}$ was affected sensitively at measurement distance longer than 120 cm, the upper limit of effective sensing distance, beyond which measurement errors are appreciable. In case of the passive sensors that has no upper limit of effective distance and $Crop\;Circle^{TM}(ACS210)$ that has the upper limit of effective sensing distance specified with 213 cm, longer than that of estimated distance, the measurement efficiency affected by the sensing distance showed no difference. This result suggests that it is necessary to use the sensor specified optimum distance. The result revealed that active sensors are more superior than their passive counterparts in establishing between the relative ratio of reflectance index and the dry weight of tobacco treated by top-down removal, and in the evaluation of biomass. $The\;Crop\;Circle\;ACS-210^{TM}$ red was proved to have the highest efficiency of measurement, followed by $Crop\;Circle^{TM}(ACS210)$ amber and $GreenSeeker^{TM}$ red, $Crop\;Circle^{TM}$ passive, $GreenSeeker^{TM}$ green, and spectroradiometer, in descending order.

• Journal of Korean Society of Transportation
• /
• v.24 no.5 s.91
• /
• pp.35-44
• /
• 2006

Acceleration and deceleration curves have been used for design purposes worldwide. The curve in design level has been regarded as an single deterministic curve to be used for design of climb lanes. It should be noted that the curve was originally made using ideal driving truck and that the curve is applied during design based on the assumption of no difference between ideal and real driving conditions. However. observations show that aged vehicles and lazy behavioring drivers nay make lower performance of vehicles than the ideal performance. The present paper provides the results of truck speeds at climbing lanes then probabilistic variation of acceleration and deceleration corves. For these purposes. a study about identification of vehicle makers, and weights for trucks at freeway toll gates and then observation of vehicle-following speed were performed. The 85%ile results obtained were compared with the deterministic performance curves of 180, 200, and 220 Ib/hp. It was identified that the performance of 85%ile results obtained from vehicle-following-speed observations were lower than one from deterministic performance curves. From these results, it may be concluded that at the beginning Point of climbing lanes additional $16.19{\sim}67.94m$ is necessary and that at the end point of climbing lanes $53.12{\sim}103.24m$ of extension is necessary.