• Title/Summary/Keyword: 분포센서

Search Result 723, Processing Time 0.03 seconds

The Study of CsI(Tl) Scintillation Detector Design and Signal Processing for the Measurement of the Radiation Distribution (방사선 분포측정용 CsI(Tl) 검출기 설계 및 신호처리에 관한 연구)

  • Hwang, Young-gwan;Lee, Nam-ho;Kim, Jong-yeol;Jeong, Sang-hun
    • Proceedings of the Korean Institute of Information and Commucation Sciences Conference
    • /
    • 2016.05a
    • /
    • pp.778-779
    • /
    • 2016
  • In This paper, We designed the scintillation detector for measuring radiation signals in units of pixels for a radiation source that is distributed in the space. And we carried out a study to design a radiation imaging by the module for obtaining the detection signal. For measuring radiation distribution we configure a radiation detector combining CsI(Tl) scintillator and a photodiode. In addition, its performance was verified via gamma irradiation test.

  • PDF

Measurement of Humidity Distribution in a Proton Exchange Membrane Fuel Cell Using Channel Embedded Humidity Sensors (채널 내장형 습도 센서를 이용한 고분자 전해질 연료전지의 습도분포 측정)

  • Lee, Yongtaek;Yang, Gyung Yull
    • Transactions of the Korean Society of Mechanical Engineers B
    • /
    • v.39 no.5
    • /
    • pp.397-403
    • /
    • 2015
  • In this study, water distribution inside a proton exchange membrane fuel cell (PEMFC) was measured experimentally. Water distribution is non-uniform because of vigorous chemical reaction and mass transport and has been difficult to measure experimentally. Therefore, much research relied on indirect measuring methods or numerical simulations. In this study, several mini temperature-humidity sensors were installed at the channel for measuring temperature and humidity of the flowing gas throughout the channel. Only one of two electrode channels was humidified externally, and the humidity distribution on the other side was measured, enabling the observation of water transport characteristics under various conditions. Diffusion through the membrane became more vigorous as the temperature of the humidifier rose, but at high current density, electro-osmotic drag became more effective than diffusion.

다공성 SnO2 가스 센서의 촉매 효과

  • Park, Ji-Won;Han, Min-A;Kim, Hyeon-Jong;Lee, Ho-Nyeon;Hyeon, Seung-Gyun
    • Proceedings of the Korean Institute of Surface Engineering Conference
    • /
    • 2018.06a
    • /
    • pp.84.2-84.2
    • /
    • 2018
  • 최근 사람의 후각으로는 감지하기 어려운 유해, 폭발성 가스로 인한 안전사고 발생이 많아짐에 따라 높은 감도를 지닌 가스 센서의 필요성이 커지고 있다. 특히 가스 검지층으로 감도 및 안정성이 뛰어난 $SnO_2$를 이용한 가스 센서 연구와 더불어 촉매 효과에 대한 연구도 활발히 진행 중이다. 본 연구에서는 물리기상증착 공정의 증착압력 등 조건들을 변화시켜 형성한 다공성 나노 구조의 $SnO_2$ 가스 검지층 위에 촉매물질을 Sputtering 방식을 이용하여 증착하였다. SEM 분석을 통해 $SnO_2$ 검지층 내 촉매물질의 분포를 확인하였다. IDT 전극 기판 위에 먼저 나노 구조의 $SnO_2$ 가스 검지층을 형성하였고 그 후에 촉매물질을 증착하였다. 제작된 샘플은 $700^{\circ}C$에서 1시간동안 튜브 퍼니스로 열처리를 진행한 뒤 챔버 내에서 측정을 진행하였다. 측정은 $300^{\circ}C$에서 CO 농도, 습도를 변화시키며 감도, 반응시간, 회복시간에 대하여 분석하였다.

  • PDF

Fiber-Optic Distributed Overheating Detection Sensor Using an Optical Time Domain Refrectometry (광시간영역 반사계를 이용한 분포형 광섬유 과열 감지 센서)

  • Kim, Dae Hyun;Kim, Kwang Taek
    • Journal of Sensor Science and Technology
    • /
    • v.22 no.4
    • /
    • pp.297-301
    • /
    • 2013
  • We proposed and demonstrated a distributed fiber-optic overheating detection sensor using optical time domain refrectometry. With increased of temperature the optical fiber is bended by a bi-metal and it result in optical leaky loss of the fiber. The sensor structure is designed in such a way that the signal of overheating is happen when the temperature exceeding a threshold temperature and the optical fiber is protected from excess bending.

Data Preprocessing Techniques for Visualizing Gas Sensor Datasets (가스 센서 데이터셋 시각화를 위한 데이터 전처리 기법)

  • Kim, Junsu;Park, Kyungwon;Lim, Taebum;Park, Gooman
    • Proceedings of the Korean Society of Broadcast Engineers Conference
    • /
    • fall
    • /
    • pp.21-22
    • /
    • 2021
  • 최근 AI(Artificial Intelligence)를 기반으로 정밀한 가스 성분 감지를 위한 후각지능(Olfactory intelligence) 기술에 연구가 활발히 진행 중이다. 후각지능 학습데이터는 다른 감지 방식의 가스 센서들이 동시에 적용되는 멀티모달리티의 특성을 지니며 또한, 공간상에 분포된 센서 배열을 통해 획득된 다차원의 시계열 특성을 지닌다. 따라서 대량의 다차원 데이터에 대한 정확한 이해와 분석을 위해서는 데이터를 전처리하고 시각화할 수 있는 기술이 필요하다. 본 논문에서는 후각지능 학습을 위한 다차원의 복잡한 가스 데이터의 시각화를 위해 잡음 등의 불필요한 값을 제거하고, 데이터가 일관성을 가지도록 하며, 데이터의 차원을 시각화 가능하도록 축소하기 위한 전처리 방법을 제시한다.

  • PDF

A Mobile Gateway Mechanism for Processing Information in ZigBee Network (ZigBee 네트워크에서 이동성을 지원하는 게이트웨이의 정보처리 메커니즘 설계)

  • Lim, Hyoung-Seok;Hong, Choong-Seon
    • Proceedings of the Korea Information Processing Society Conference
    • /
    • 2007.05a
    • /
    • pp.818-821
    • /
    • 2007
  • 무선 센서 네트워크에서 특정 지역에 분포된 센서들은 데이터를 감지하고, 싱크 노드는 소스 노드들에게서 데이터를 수집한다. 현재, 여러 연구기관 및 기업에서 무선 센서 네트워크를 구현하고 실용화하기 위해 연구하는 중이며, 대표적인 예로 IEEE Standards의 IEEE 802.15.4와 이를 하위 계층으로 사용하는 ZigBee Alliance 의 ZigBee 가 있다. 본 논문에서는, ZigBee 기반의 네트워크에서 감지된 데이터들을 수집하기 위한 이동성을 지원하는 게이트웨이의 정보처리 메커니즘을 설계한다.

The Implementation of TMM test phantom for evaluating the thermal performance in High Intensity Focused Ultrasound system (강력 집속 초음파 시스템의 열적 성능 평가를 위한 팬텀 개발에 관한 기초연구)

  • Yu, Woo-Jin;Noh, Si-Cheol;Park, Moon-Kyu;Min, Hae-Ki;Park, Jae-Hyun;Choi, Heung-Ho
    • Proceedings of the KIEE Conference
    • /
    • 2008.10b
    • /
    • pp.484-485
    • /
    • 2008
  • 초음파는 의학적 진단 및 치료의 목적으로 널리 사용되어 왔다. 일반적으로, 초음파 조사의 생물학적 무해성은 많은 연구를 통하여 보고되었으나, 최근 초음파 집속을 통한 강력 초음파의 사용에 대한 열적 안전성 평가가 중요한 요소로 대두되고 있다. 이에 본 연구에서는 강력 집속 초음파의 전달 에너지와 열적 분포를 측정하여 안전성 평가에 활용 가능한 초음파 열분포 팬텀을 제안하였다. 온도 분포 측정용 팬텀은 초음파 조직유사 팬텀 재료인 한천을 이용하였으며, 음향학적 특성의 유사성을 평가하였다. 온도 효과를 측정하기 위하여 $3{\times}3$의 형태로 온도 센서를 팬텀 내부에 배열하여 초음파 조사에 따른 온도 분포를 측정하였고 온도 측정을 위한 시스템을 개발하여, 초음파 가열 실험을 수행하였다. 본 연구에서 제안된 초음파 온도 분포 측정용 팬텀의 유용성을 확인하였으며, 온도 분포용 팬텀을 통한 강력 집속 초음파 장비의 열적 성능 평가에 적용 될 수 있을 것으로 사료되었다.

  • PDF

Verification, Variation and Application of Image SNR Distribution based upon Nonlinear Image Sensor Model using Simulation (시뮬레이션을 이용한 위성용 카메라 비선형 모델의 영상 신호-잡음비(Image SNR) 분포도 검증/특성 및 활용)

  • Myung, Hwan-Chun
    • Aerospace Engineering and Technology
    • /
    • v.8 no.2
    • /
    • pp.160-169
    • /
    • 2009
  • In the paper, the Image SNR(Signal-to-Noise) distribution proposed in [1] is reviewed from the three points of views: verification, variation, and application of the distribution. First, the proposed Image SNR distribution is verified through the noise-based simulation over a 2D image detector. Second, its variation over the linear/nonlinear gains shows that the noise-effect itself cannot explain every reason for the degraded Image SNR distribution. Third, through the application to optimal selection of the operation parameters, the usefulness of the proposed distribution is clarified.

  • PDF

Comparison of index velocity method and velocity distribution method using river surface velocity (하천 표면유속을 이용한 지표유속법과 유속분포법 비교)

  • Lee, Sin Jae;Yoon, Young Sun;Cho, Sang Uk
    • Proceedings of the Korea Water Resources Association Conference
    • /
    • 2022.05a
    • /
    • pp.259-259
    • /
    • 2022
  • 하천에서 측정된 표면유속을 이용하여 유량을 산정하는 방법은 전통적으로는 여러 개의 측선에서 표면유속을 측정하고 해당 단면적을 적용하여 전체의 유량을 산정한다. 이러한 방법은 조사자가 직접 표면유속계를 이용하여 이동하면서 측정해야 하며, 측정에 상당한 시간이 소요된다. 또한 사람이 직접 교량 위, 케이블 등을 통해 측정해야 하므로 위험에 노출될 수 있다. 따라서 실시간 표면유속을 측정하여 무인으로 유량을 산정할 수 있는 방안이 필요하다. 본 연구에서는 최대유속이 발생하는 하나의 지점에서 측정된 표면유속을 이용하여 전체의 유량을 산정할 수 있도록 지표유속법(index velocity method)과 유속분포법(velocity distribution method)을 적용하여 비교하고자 한다. 지표유속법은 최대유속과 평균유속과의 관계식을 작성하여 유량을 산정하는 방식이며, 유속분포법은 Chiu(1987, 1988)의 엔트로피 개념의 유속분포법(개수로 단면에서의 2차원적 유속분포)을 적용하고자 한다. 연구를 위해 사용되는 자료는 8개 지점에서 전자파표면유속계로 측정된 유속 및 유량자료를 이용하였다. 본 연구결과를 활용하여 표면유속을 이용한 자동유량측정시스템을 도입한다면 자동유량측정시설의 설치 및 운영에 있어 기존 수중에 센서를 설치하여 운영하는 것보다 효율적일 것으로 판단된다. 또한 단면형상 및 흐름이 복잡하지 않는 하천에서 활용도가 높을 것으로 판단된다.

  • PDF

Fixed Partitioning Methods for Extending lifetime of sensor node for Wireless Sensor Networks (WSN환경에서 센서노드의 생명주기 연장을 위한 고정 분할 기법)

  • Han, Chang-Su;Cho, Young-Bok;Woo, Sung-Hee;Lee, Sang-Ho
    • Journal of the Korea Institute of Information and Communication Engineering
    • /
    • v.20 no.5
    • /
    • pp.942-948
    • /
    • 2016
  • WSN based on wireless sensor nodes, Sensor nodes can not be reassigned and recharged if they once placed. Each sensor node comes into being involved to a communication network with its limited energy. But the existing proposed clustering techniques, being applied to WSN environment with irregular dispersion of sensor nodes, have the network reliability issues which bring about a communication interruption with the local node feature of unbalanced distribution in WSN. Therefore, the communications participation of the sensor nodes in the suggested algorithm is extended by 25% as the sensor field divided in the light of the non-uniformed distribution of sensor nodes and a static or a dynamic clustering algorithm adopted according to its partition of sensor node density in WSN. And the entire network life cycle was extended by 14% to ensure the reliability of the network.