• Journal of Conservation Science
• /
• v.6 no.1 s.7
• /
• pp.3-14
• /
• 1997

Twelve Punchong sherds collected in Hakbongni, Kongju where the well known iron-painted on white slip were manufactured from late 15C to early 16C were analyzed for their composition and microstructure. The composition of the body was analyzed by X-ray fluorescence and that of glaze by electron probe micro-analyzer. Microstructure was observed by optical microscope, polarizing microscope, EPMA, and X-ray diffractometer. The results of composition of body and glaze of Hakbongni were compared with those of Punchong from Yongsuri, Boryong which was close to Hakbongni. The composition of body and glaze of these two areas were compared by principal component analysis using SPSS program. Hakbongni bodies have higher silica and flux materials but lower alumina and their glaze have higher silica, soda, iron oxide but lower alumina, calcia. Hakbongni punchong itself is divided into two groups. Their glaze is lime type. There are many remnant minerals, such as quartz, large feldspar mass with partially melted surrounding area, albite, biotite, and iron-oxide. From such a microstructure we can assume that preparation of raw material was rather crude and firing temperature quite low. Iron-painted material is identified as Mg/Fe/Al spinel by composition analysis and XRD pattern.

• Journal of the Korean Chemical Society
• /
• v.42 no.3
• /
• pp.251-265
• /
• 1998

Punch'ong and whiteware sherds excavated from four kilns located in Ch'unghyodong, Kwangju, Chollanamdo were analyzed for their body and glaze composition. They are classified into eight different groups by the site and layer from which they were collected. In principal component analysis of major composition, the punch'ong body separates out into several different groups. CHE2, made in early fifteenth century, has a higher aluminum and lower iron content compared to the later groups of lower grade. Whiteware body has a very high aluminum content of around 30 wt. in both soft type and hard type. Punch'ong glaze was determined to be lime type and whiteware alkali-lime type.

• The Journal of the Convergence on Culture Technology
• /
• v.1 no.3
• /
• pp.23-30
• /
• 2015

Aroma therapy was used for religious or healing purpose in the world throughout the history. In these days, numbers of people use aroma therapy for various reasons such as mental health issue. Aroma diffusers are made with various subjects, but most are made with volatilization and candle by using fumigation method. Korea's a grayish-blue-powdered celadon has insignificant position in both traditional and cultural value. Grayish-blue-powdered celadon must constantly develop its style and design and collaborate with modern product to meet the demand of the today's market. In this research, it will find the method to develop an aroma diffuser by using a grayish-blue-powdered celadon to meet consumer's demand. And ultimately, this research will construct a cultural infrastructure based on traditional image and by adding more value on the traditional ceramics market.

• Journal of the Korean Chemical Society
• /
• v.46 no.2
• /
• pp.125-138
• /
• 2002

The kiln at Chollanamdo Kwangjusi Ch'unghyodong, which produced punch'ong and white wares for a period of 70 to 80 years in the 15th century, is examined for their scientific technological param-eters. Punch'ong sherds were divided into seven different groups according to the location and the layer of the waste mounds from which they were excavated. Optical and scanning electron microscope were used for microstructural observations and X-ray diffraction and polarized microscope for mineral characteristics. For determining the firing temperature, sherds were refired at different temperatures and their micro-structural changes were observed. Some wares such as the group CHE2 was high quality wares fired at high emperature around 1200$^{\circ}C$ for palace use, but as the ceramics ware became more widely used and the white wares increasingly preferred over punch'ong, lower quality wares of rougher raw materials were firedat lower temperatures around 1100-1150$^{\circ}C$ in quantity. They used local raw materials of several types, all available locally.

• Korean Journal of Heritage: History & Science
• /
• v.52 no.3
• /
• pp.4-37
• /
• 2019

Buncheong Ware, which was produced for approximately 200 years from the end of the Goryeo Dynasty to the beginning of the Joseon Dynasty, was used for royal house and state affairs during the early Joseon Dynasty. Records of Buncheong Ware can be found with Jagiso and Dogiso, considered the place of production, in the 'Sejongsylrok jiliji'. This is notable, unlike celadon and white porcelain. However, compared to Gyeongsangnam-do and Gyeongsangbuk-do, the study of Jagiso and Dogiso in Jeollanam-do and Jeollabuk-do has been unsatisfactory. In this paper, we examined the locations of Jagiso and Dogiso in the Jeollanam-do prefecture. This study is focused on Najumok, located in the western part of Jeollanam-do. The following research results were obtained: First, the locations of Jagiso and Dogiso in nine areas were examined. These nine areas comprised Najumok and its immediate provinces of Haejingun, Yeongamgun, Yeonggwanggun, Hampyeonghyeon, Muanhyeon, Gochanghyeon, Heungdeokhyeon and Jangseonghyeon. Previous research results exist for some of the regions; however, only Buncheong Ware was used to estimate Jagiso and Dogiso. In this paper, we tried to discover a more accurate position of Jagiso and Dogiso through a comparison of the place names recorded in the 'Sejongsylrok jiliji' and the place names recorded in the 'Hoguchoungsu'. Also, pottery-related area names and Buncheong Ware obtained from the field survey were reviewed. Table 2 shows the specific positions of Jagiso and Dogiso in the areas examined. Second, it would appear that pottery was produced not only in Jagiso but also in Dogiso. This is because much of Buncheong Ware was unearthed in Najumok, Yeongamgun, and Muanhyeon Dogiso. However, it was only excavated from the Buncheong Kiln Site in Yucheon Village, Sangweol-ri, Yeongam-gun; there could be limitations regarding to the rest of the areas because only a field survey was conducted, not an excavation. A recent excavation at Donggok Village in Cheongdo-ri, Gimje also confirmed a Buncheong Kiln Site. There were two Buncheong Ware ('公', '上') artifacts excavated from the site, believed to be Gongnapjagi. In addition, Cheongdo-ri, where the Buncheong Kiln Site is located, was found to be an area in Wurimgokmyeon, a former Wurimgok at a Dogiso in Jeonjubu. Consequently, it would seem that Dogiso also produced porcelain (Buncheong Ware). If more data can be obtained from the excavations at sites considered to be Dogiso, the results of Dogiso-related research will be strengthened. Third, in previous surveys, field surveys and excavation surveys were based on estimates using artifacts, but the name of the location of the Jagiso and Dogiso may be confirmed more accurately by tracking the changes in the names of the administrative areas. Therefore, although it is important to conduct research using the results of surveys or excavations, changes in the place names or places related to porcelain must not be overlooked.

• MISULJARYO - National Museum of Korea Art Journal
• /
• v.97
• /
• pp.55-68
• /
• 2020

The inscription found on buncheong ware (粉靑沙器, grayish-blue-powdered celadon) provides information on the bowl today, but in the past served as a device for controlling tributary payments (貢納) and the movement of government property (官物). The inscription had to be written or engraved clearly so that it could be recognizable to officials in charge of managing bowls. Such inscriptions offer important clues for contemporary research on buncheong ware. Buncheong Bowl with Stamped Design and Inscription of "Naeja" (內子) (bon 13808) in the collection of the National Museum of Korea bears a distinct inscription compared to other buncheong ware. Commonly, the inscription on buncheong indicated the name of the government office (官司名) to which the vessel belonged or the name of the place (地名) where the vessel was produced. However, the inscription "Naeja" on the buncheong bowl at the National Museum of Korea has no corresponding government office. "Naeja" is in fact a misspelling of Naeja (內資), meaning this bowl belonged to the Naejasi (內資寺, Royal Bureau of Procurement). Although "Naeja" (內子) was a misspelling of the intended Naeja (內資), it was still understood as a reference to the Naejasi since they were homophonic. Recently, buncheong ware with misspelled yet homophonous inscriptions have begun to be excavated in downtown Seoul. Examples including "Naeja" (內子) instead of Naeja (內資) and "Insu" (仁守) instead of Insu (仁壽) have been unearthed from historical sites in Seoul that functioned as consumption sites, meaning they were in fact circulated as government property despite the misspellings (whether accidental or the outcome of ignorance). Such misspelled yet homophonous inscriptions are characterized by the use of simple characters and a few sloppy strokes. Like other buncheong ware bearing the inscriptions of government office names, the bowls with the inscriptions of "Naeja" (內子) and "Insu" (仁守) were discovered at historical sites in Seoul. These misspelled homophonous inscriptions reveal that errors occurred during the process of engraving inscriptions on buncheong ware produced as a tributary payment during the early Joseon Dynasty and that buncheong ware with such errors were still distributed.

• Archives of design research
• /
• v.19 no.1 s.63
• /
• pp.59-68
• /
• 2006

Scarf has played an important role not only as keeping warm of human body but also as accessory of clothes. These days with taking a growing interest of accessory, scarf had thrown off a subsidiary part and gradually had a leading place which guides the overall mode of fashion. Because scarf design of Korea does not get out of imitation step of foreign countries brands it is necessary to develop the scarf design which can show the cultural identity and originality of Korea in international society. Therefore in this study, I chose lotus flower patterns expressed on Buncheon pottery and Korean traditional patchwork cloth as the subject material of scarves design development, and my intention for this study is to develop scarves designs of Korean images by adding modern scenes. For that, first I researched lotus flower patterns expressed on Buncheon pottery and Korean traditional patchwork cloth. Among those materials, I selected to had been presented modern image. And by using computer design program of adobe illustrator 10.0 I designed the basic patterns of three types and developed the square scarves design and rectangle scarves design with those.

• Analytical Science and Technology
• /
• v.26 no.3
• /
• pp.211-221
• /
• 2013

This research aims to examine compositional and microstructural properties of grayish-blue-powdered celadon in Wonju Beopcheon-temple site. X-ray fluorescence sequential spectroscopy (XRF) with micro-point analysis, scanning electron microscopy (SEM) with energy dispersive spectroscopy (EDS) and X-ray diffraction (XRD) were applied to determine the chemical composition, microstructure and crystallinity of samples, respectively. As a result, the average compositions of bodies were low silica ($RO_2$) and high flux (RO+$R_2O$). Owing to the high content of calcium oxide the glaze is considered lime type between limealkali type. The body of celdon sheard was found quarts, mullite, microcline, albite. Especially, the body's chemical compositions were compared to the results of previous studies by using a Seger formula. The compositional properties of Grayish-blue-powdered celadon in Wonju Beopcheon-temple site showed diffrently from the the other grayish-blue-powdered celadon.

• Korean Journal of Heritage: History & Science
• /
• v.54 no.4
• /
• pp.192-211
• /
• 2021

In Seongju, Gyengsangbuk-do, the Placenta Chamber (胎室, Taesil) of 18 sons and a son of the crown prince of King Sejong(世宗大王) is located in one place. Taesil refers to the place where the umbilical cord and placenta, which are separated when the baby is born, are placed in a jar made of pottery and stone box and then buried on the ground. The placenta chamber in Seongju has the Buncheong ware (粉靑沙器) cover buried on the ground to protect the baby's placenta. These covers are all hemispherical, with a diameter of more the 20cm. The decorations were made using black and white inlaid techniques only on the outside. The Buncheong ware cover with this shape and pattern has been confirmed only in the placenta chamber in Seongju. This study targets 6 of the Buncheong ware cover whose owners were identified, when and where they were prepared, what the stylistic features and meanings are, and where it was produced. The results of the study are as follows. First, ss a result of reviewing the production background and procurement system of this bowl, it was inferred that it was sourced from Jangheunggo (長興庫) at the central government office, between 1436 and 1439, when the event to bury the placenta of royal members in the ground was the most active. Second, it analyzed the unique features of this cover, such as the shape, pattern, and baked traces. The shape and pattern were compared to the ritual objects contained in the Sejong Silok Oryeui (『世宗實錄』 「五禮」, Five Rites of King Sejong Chronicle) and the lid of the royal placenta jar made in the 15th and 16th centuries. Third, this study suggests that the baking method was based on the shape and location of the traces remaining outside the cover. Finally, the following data were used to estimate the production site: the relationship with the 'Jagiso (磁器所, ceramic workshop) registered in the Sejong Silok Jiriji (『世宗實錄』 「地理志」, Geographical Appendix of King Sejong Chronicle); various records of contribution and dedication about the Buncheong ware made here; and the Buncheong ware and related tools excavated from the kiln site in the area. The place where the Buncheong ware cover was produced is estimated to be the most likely production site for the kiln site in Chunghyo-dong Kiln Site, located in Jeolla-do province by synthesizing the data above.

• Conservation Science in Museum
• /
• v.8
• /
• pp.31-40
• /
• 2007

As part of supporting projects, the conservation science team of National Museum of Korea has treated 12 items of the porcelains entrusted by Jeonju National Museum for conservation. This paper is about the porcelains called the rice-bale-shaped battle white porcelain (No. Junju 97) and the big jar with incised fish design buncheon ware (No. Junju 5630) among the 12 items of porcelains finished with treatment, and by analyzing the information collected in the process of treating the rice-bale-shaped battle white porcelain, the manufacturing method and the use of the needle was presumed. As the big jar with incised fish design buncheon ware had been damaged extensively, it was unclear whether it could be repaired or not, but now I am going to introduce how it can be repaired more efficiently.