• Journal of Bio-Environment Control
• /
• v.32 no.3
• /
• pp.197-204
• /
• 2023

Heat stress causes a decrease in immunity and disease occurrence in livestock, increasing mortality and impairing productivity. In particular, chickens are very vulnerable to high temperatures compared to other livestock species because their entire body is covered with feathers and sweat glands are not developed. Currently, air conditioning systems are essential in broiler houses to prevent high-air temperature damage to broilers, but conventional cooling facilities are greatly affected by the external environment, so there are limits to their use. In this study, to propose a cooling method, thermal insulation paint and a heat pump were apply in the broiler houses to evaluate the temperature reduction effect. The heat pump experiment was to analyze the cooling effect according to the change in ventilation rate and propose an appropriate. As a result of the experiment, the heat-insulating paint reduced the temperature of the broiler houses by maximum 1-2℃, and in the broiler houses where the heat pump was operated, the temperature decrease was the largest when the ventilation rate was the lowest. When the air temperature in the house is similar to or lower than the outside air temperature, it is considered to be most effective to use a heat pump while maintaining only the minimum ventilation rate.

• Membrane Journal
• /
• v.33 no.6
• /
• pp.398-408
• /
• 2023

This work developed a hood and filter for antibacterial protective clothing for medical powered air purifying respirators (PAPR) that can be used in medical settings and quarantine against infectious diseases such as Zika virus, Middle East respiratory syndrome (MERS), and coronavirus disease-19 (COVID-19). The hood material of the protective clothing was made of polypropylene spunlace nonwoven fabric (SFS) was used for withstand wind pressure and external physcial pressure. Forthermore, in order to reduce the user's risk of infection, phytoncide-based materials were used on the outer-surface of the hood to achieve a 99.9% antibacterial effect, and the inner-surface were treated with hydro-philic materials to improve absorbency by 25%. In addition to evaluating the artificial blood penetration resistance, dry mi-croorganism penetration resistance, wet bacteria penetration resistance, and bacteriophage penetration resistance required for medical protective clothing hoods, it received a passing evaluation of levels 2-6. Meanwhile, as a result of evaluating the performance of the antibacterial treated spunlace high efficiency particulate air (HEPA) filter, excellent antibacterial properties, dust removal rate, and differential pressure effect were confirmed. All performance evaluations were conducted by an accredited certification body in accordance with the medical PAPR certification standards.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.28 no.1
• /
• pp.32-38
• /
• 2024

In the case of apartment building, it is difficult to conduct non-destructive testing due to the actual presence of people and the dust and noise generated during the core test, so inspections are performed each time in the common area and underground parking lot, and the tests are conducted on the finishing material rather than on the concrete surface due to low-cost orders. As the process progresses, poor inspection is inevitable. In addition, the proposed formulas for strength estimation have large fluctuations depending on the differences in test conditions and environments, and even if they show the same measured value, the deviation between each proposed formula is large, making it difficult to accurately estimate strength, making it difficult to use. Accordingly, we would like to select finishing materials mainly used in apartment complexes and compare and evaluate the compressive strength of concrete according to the type of finishing material by using non-destructive testing methods directly on the finishing materials without removing the finishing materials. The reliability evaluation results of the estimated compressive strength of concrete using the ultrasonic velocity method according to the type of finishing material are as follows. The error rate between the estimated compressive strength and compressive strength derived through the ultrasonic velocity method shows a wide range of variation, ranging from 21.83% to 58.89%. The effect of the presence or absence of finishing materials on the estimated compressive strength was found to be insignificant. Accordingly, it is necessary to select more types of finishing materials and study ultrasonic velocity methods according to the presence or absence of finishing materials, and to study estimation techniques that can increase reliability.

• Korean Chemical Engineering Research
• /
• v.52 no.5
• /
• pp.688-693
• /
• 2014

For investigating NO reduction activity of an catalytic filter, the catalytic performance was measured under the presence of $SO_2$ and $H_2O$, respectively or simultaneously in the simulation gas composed of NO, $NH_3$, and air. The catalytic filter was prepared by coating $V_2O_5-WO_3/TiO_2$ catalyst on the pore surface of SiC filter element of which the superior performance for the particulate removal was well known. At the temperature below $260^{\circ}C$, the catalytic activities were enormously decreased under the presence of $SO_2$ and $H_2O$, respectively or simultaneously, compared with those under the cases of the absence of $SO_2$ and $H_2O$. However, the presence of $SO_2$ promoted the performance of the catalytic filter above $320^{\circ}C$ with showing the NO conversion better than 99.8% for the NO inlet concentration of 500 ppm and at the face velocity of 2 cm/s. In particular, the presence of water showed high NO conversion higher than 99% up to high temperature of $380^{\circ}C$. This effect of water was explained by the reason that it retarded the ammonia oxidation which is the main step into the formation of $N_2O$. The initial NO reduction activity of the catalytic filter maintained for the duration of 100 hours in the presence of $SO_2$ and $H_2O$. Therefore, it was concluded that the catalytic filter was promisingly useful for the industrial NOx reduction catalyst in order to treat the particulate and NO simultaneously.

• Journal of the Korean Geographical Society
• /
• v.30 no.1
• /
• pp.16-34
• /
• 1995

This study aims to analyze the impact of cement industry on region change. For this study Maepo-Eub was selected as study area, where three cement factories are located. The data for analysis were obtained from interviews, questionaire surveys and the employee list of each cement factory. The analytic procedures for this study are as follows: 1) The change of regional employment was analyzed by development was industry in terms of the permanent address, education level, occupational status of the employee. 2) The degree of population growth are analyzed by developmental staae of the industry. Some conclusions from this study follows: 1) As these cement factories were built at Maepo in the 1960's, there were plenty of employment opportunities. Thus many technicians and workers flooded in Maepo-Eub. in the 1970's with the expansion of production facilities therewere much more immigrants to the industrial region, while there were outflow in the neighboring rural areas. In the 1980's the opportunity for the employment of cement factories have been decreased due to the introduction of the automation processes and larger, sized machines. Among the employee of three cement factories the native of Chungcheongbukdo (65%; in them Danyang 52%, Jecheon 32%) is dominant, the second is from Kangwon-do (13%), and the third is from Kyungsangbuk-do (11%) adjacent to Chungcheongbuk-do. It means that there are more employment opportunity in the near places of cement factories. 2) In the period of 1960's study area had experineed rapid social increase in population by the development of cement industry. That is, cement industries created new job opportunities and attracted large population concentration into this area. In the period of 1970's the population of the industrial region have increased continuously, while the population of neighboring rural areas have decreased. In the period of 1980's the population of Maepo decreased steadily because of decrease of labour forces through automation and commuting. Thus in the early stage of idustrial development large population concentrated in the neighboring villages of cement factories, and formed residential areas, commercial areas and service areas. As agricultural and was encroached, rural people left their regions to live in the more convenient suburbs. 3) People engaged in cement industry think that cement industry has a favorable influence on regional development, such as creating job opportunity, raising income level, developing business and service sector, and leading high economic growth. While farmers and some people think that cement industries as a pollution causing factories have a harmful influence on regional development, sucha as injuring the crops, causing environmental pollution, and being harmful to health. If pollution problems are solved, I think Maepo will play an important role as a regional center which can offer employment opportunity, business and service function to pheripheral rural areas, and raise a income level.

• Korean Journal of Environmental Agriculture
• /
• v.15 no.1
• /
• pp.1-10
• /
• 1996

The contents of heavy metals in soil near the Janghang smelter area were observed to understand present status and relationship between their fraction and the absorption by rice. The soil samples were taken from the eight sites of the paddy fields in 1982 and 1990, and analysis on heavy metals including Cd, Zn, Cu and Pb was performed. The results were as follows: Total contents of heavy metals in the samples of 1990 were higher than those of 1982. The order of increasing ratio was Cu > Zn > Pb > Cd and the variation of Cd content by sequential differente extracting was residual > exchangeable > dilute acid-extractable fractions and its increasing range was from 38 to 71% during nine years. The ratio of immobile heavy metals bound within an oxide or silicate matrix of Fe-Mn oxide bound and residual in surface soil was that Cd, Pb, Cu and Zn were 31.65, 42.22, 76.57 and 79.49%, respectively, and their mobile ratios of exchangeable, dilute acid-extractable and organically bound were more than 20.28%. Those of mobile Cd, Pb, Cu and Zn were 68.35, 55.78, 23.43 and 20.28%, respectively. Correlation between the heavy metal contents in surface soil and those in tissue of rice plant, such as leaf blade, leaf sheath, stem and panicle axis, were significant, but were not significant in subsurface soil. The dilute acid-extractable and organically bound fractions of Cd, Cu, Pb and Zn in surface soil were more significantly correlated with those in tissues of paddy rice.

• Tuberculosis and Respiratory Diseases
• /
• v.60 no.5
• /
• pp.554-563
• /
• 2006

Background: PM is known to induce various pulmonary diseases, including asthma, cancer, fibrosis and chronic bronchitis. Despite the epidemiological evidence the pathogenesis of PM-related pulmonary diseases is unclear. Methods: This study examined the effects of PM exposure on the secretion of $TNF-{\alpha}$ and $IL-1{\beta}$ in the cultured alveolar macrophages. The cultured primary alveolar macrophages were treated with the medium, PM ($5{\sim}20{\mu}g/cm^2$), LPS (5ng/ml), and PM with LPS for 24h and 48h respectively. ELISA was used to assay the secreted $TNF-{\alpha}$ and $IL-{\beta}$ in the culture medium. Western blotting was used to identify and determine the level of proteins isolated from the culture cells. The cells cultured in the $Lab-Tek^{(R)}$ chamber slides were stained with immunocytochemical stains. Results: PM induced $TNF-{\alpha}$ and $IL-1{\beta}$ secretion in the culturing alveolar macrophages, collected from the SPF and inflammatory rats. However, the effects were only dose-dependent in the inflammatory macrophages. When the cells were co-treated with PM and LPS, there was a significant synergistic effect compared with the LPS in the both cell types. Conclusion: PM might be play an important role in the induction and/or potentiation of various lung diseases by oversecretion of $TNF-{\alpha}$ and $IL-1{\beta}$.

• Journal of the Korean earth science society
• /
• v.31 no.6
• /
• pp.600-607
• /
• 2010

In 2008, multiple episodes of large-scale transport of natural airborne particles and anthropogenically affected particles from different sources in the East Asian continent were identified in the National Oceanic and Atmospheric Administration (NOAA) satellite RGB-composite images and the mass concentrations of ground level particulate matters. To analyze the aerosol size distribution during the large-scale transport of atmospheric aerosols, both aerosol optical depth (AOD; proportional to the aerosol total loading in the vertical column) and fine aerosol weighting (FW; fractional contribution of fine aerosol to the total AOD) of Moderate resolution Imaging Spectroradiometer (MODIS) aerosol products were used over the East Asian region. The six episodes of massive natural airborne particles were observed at Cheongwon, originating from sandstorms in northern China, Mongolia and the loess plateau of China. The $PM_{10}$ and $PM_{2.5}$ stood at 70% and 16% of the total mass concentration of TSP, respectively. However, the mass concentration of $PM_{2.5}$ among TSP increased as high as 23% in the episode in which they were flowing in by way f the industrial area in east China. In the other five episodes of anthropogenically affected particles that flowed into the Korean Peninsula from east China, the mass concentrations of $PM_{10}$ and $PM_{2.5}$ among TSP reached 82% and 65%, respectively. The average AOD for the large-scale transport of anthropogenically affected particle episodes in the East Asian region was measured at $0.42{\pm}0.17$ compared with AOD ($0.36{\pm}0.13$) for the natural airborne particle episodes. Particularly, the regions covering east China, the Yellow Sea, the Korean Peninsula, and the east Korean sea were characterized by high levels of AOD. The average FW values observed during the event of anthropogenically affected aerosols ($0.63{\pm}0.16$) were moderately higher than those of natural airborne particles ($0.52{\pm}0.13$). This observation suggests that anthropogenically affected particles contribute greatly to the atmospheric aerosols in East Asia.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.3 no.1
• /
• pp.78-90
• /
• 1993

This study was designed obtain and early detection the workers exposed to excessive copper dust and also to present biological exposure index. The exposed group consisted of 62 male workers at the metallurgy workplaces. To evaluate the degree of individual exposure the copper dust, each personal air sampling was collected. Biological exposures in the exposed group was quantified for the blood and urine copper levels using flameless atomic absorption spectrophotometer. The control group consisted of 70 male adults with the history of nonexposure to copper by the inhalation occupationally. The average concentration of copper in blood and urine of the exposed group was $49.44{\pm}8.90(29.05-80.63){\mu}g/dl$, $39.99{\pm}11.04(29.62-80.63){\mu}g/l$ respectively. The average concentration of air borne copper was $0.48{\pm}0.31(0.03-1.18)mg/m^3$. The average concentration of blood and urine copper in the control group was $42.93{\pm}5.84(25.05-57.85){\mu}g/dl$, $33.02{\pm}13.38(12.00-82.05){\mu}g/l$ respectively. The difference observed in the average concentration of blood and urine copper of the exposed and control groups was statistically significant seperately (blood copper, p<0.05 ; urine copper, p<0.05). The relationship between the individual exposure concentration of air borne copper and the concentration of the blood and urine copper was statistically significant, respectively (blood copper, r=0.54, p<0.05 ; urine copper, r=0.37, p<0.05). The relationship between the working duration and the concentration of blood and urine was not statistically significant respectively (blood copper, r=0.14 ; urine copper, r=0.12). The relationship between the age and the concentration of blood and urine copper was statistically not significant respectively (blood copper, r=013 ; urine copper, r=-0.06). The relationship between blood and urine copper concentration in the exposed group was statistically significant (r=0.62, p<0.05), and the relationship between blood and urine copper concentration in the control group was also statistically significant (r=0.39, p<0.05).

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.4 no.1
• /
• pp.33-40
• /
• 2006

The characteristics of the aluminum waste melting and the distribution of the radioactive nuclides have been investigated for the estimation on the volume reduction and the decontamination of the aluminum wastes from the decommissioning of the TRIGA MARK it and III research reactors at the Korea Atomic Energy Research Institute(KAERI). The aluminum wastes were melted with the use of the fluxes such as flux $A:NaCl-KCl-Na_3AlF_6$, flux B:NaCl-NaF-KF, flux $C:CaF_2$, and flux $D:LiF-KCl-BaCl_2$ in the DC graphite arc furnace. For the assessment of the distribution of the radioactive nuclides during the melting of the aluminum, the aluminum materials were contaminated by the surrogate nuclides such as cobalt(Co), cesium(Cs) and strontium(Sr). The fluidity of aluminum melt was increased with the addition of the fluxes, which has slight difference according to the type of fluxes. The formation of the slag during the aluminum melting added the flux type C and D was larger than that with the flux A and B. The rate of the slag formation linearly increased with increasing the flux concentration. The results of the XRD analysis showed that the surrogate nuclide was transferred to the slag, which can be easily separated from the melt and then they combined with aluminum oxide to form a more stable compound. The distribution ratio of cobalt in ingot to that in slag was more than 40% at all types of fluxes. Since vapor pressures of cesium and strontium were higher than those that of the host metals at the melting temperature, their removal efficiency from the ingot phase to the slag and the dust phase was by up to 98%.