• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.42 no.1
• /
• pp.75-85
• /
• 2016

Pectin, a naturally occurring polysaccharide, has in recent years attracted considerable attention. Its benefits are increasingly appreciated by scientists and consumers due to its safety and usefulness. The chemistry and gel-forming characteristics of pectin have enabled to be used in pharmaceutical industry, health promotion and treatment. Yet, it has been rarely used in cosmetics because of its incompatibility with many cosmetic ingredients, including alcohols, and unstable viscosity of pectin gels under various pH and salt conditions. However, low-molecular-weight pectin oligomers have excellent biological activities, and depolymerization of pectin to produce cosmetic ingredients would be very useful. In this study, we attempted the development of cosmetic ingredients using pectin with an excellent effect on human skin. We developed a bio-conversion process that uses enzymatic hydrolysis to produce pectin hydrolysates containing mainly low-molecular-weight pectin oligomers. Gel permeation chromatography was used to determined the ratio of hydrolysis. The molecular weight of the pectin hydrolysates obtained varied between 200 and 2,700 Da. The two newly developed low-molecular-weight pectin hydrolysates, LMPH A and B, had higher anti-oxidative activities than pectin or D-galacturonic. Exposure to UVB radiation induces apoptotic cell death in epidermal cells. Annexin V binding and propidium iodide uptake were measured by flow cytometry to evaluate UVB-induced cell death in HaCaT cells. Both LMPH A and B reduced UVB-induced cell death and increased cell proliferation by 22% and 30% at 0.5% concentration respectively, while pectin had no significant activity. In conclusion, this study suggests that the newly developed low-molecular-weight pectin hydrolysates can be used as safe and biologically active cosmetic ingredients.

• Journal of Environmental Health Sciences
• /
• v.33 no.2 s.95
• /
• pp.158-165
• /
• 2007

본 연구는 근원에 따른 용존 유기물의 특성을 평가하기 위해 하천수, 호소수, 하수 2차 처리 유출수의 자연수 및 Aldrich, Wako 사에서 공급된 휴믹산을 대상으로 분자량 분포에 따른 물리 화학적인 수질 특성, 생분해도, 소독, 부산물의 생성 등을 고찰하였다. SUVA를 이용해서 자연수의 생분해 가능성을 평가한 결과 호소수, 하수, 하천수 순으로 예측되었으며 이는, 실제 생분해도 실험 결과와 유사하였다 생분해 반응 중 저분자 영역대의 용존 유기물은 점차 감소하였고 반면에 고분자 영역대의 용존 유기물은 증가하였다. SMP는 전체 용존 유기물의 0.7-5.5%정도 관찰되었으며 고분자 물질을 많이 함유한 시료에서 높게 나타났다. THM 생성은 대체로 고분자 물질이 높을수록 증가하였으며 THMFP도 Wako 휴믹산을 제외한 샘플에서 이와 유사한 경향을 나타냈다.

• Journal of the Korean Vacuum Society
• /
• v.7 no.1
• /
• pp.72-76
• /
• 1998

A new gas-flow type reactor for plasma polymerization was developed to synthesize functional polymers, which enhances reaction of radicals activated in the discharge. Styrene was used for the plasma polymerization and molecular strucure and molecular weight distribution of the plasma -polymerized styrene were studies. The ploymer was evaluated to be an efficient electron beam resist. The sensitivity of the plasma-polymerized styrene film formed by this new reactor was better than that of the reported values of conventional polystyrene, Fine resist patterns could be successfully developed by a wet process.

• Electrical & Electronic Materials
• /
• v.7 no.5
• /
• pp.425-429
• /
• 1994

In this paper, we study on the plasma polymerized styrene as a negative electron-beam resist. Plasma polymerized thin film was prepared using an interelectrode inductively coupled gas-flow type reactor. We show that polymerization parameters of thin film affect sensitivity and etching resistance of the resist. Molecular weight distribution of plasma polymerized styrene is 1.41-3.93, and deposition rates of that are 32-383[.angs./min] with discharge power. Swelling and etching resistance becomes . more improved with increasing discharge power during plasma polymerization. Etch rate by RIE is higher than that by plasma etching.

• Applied Chemistry for Engineering
• /
• v.24 no.1
• /
• pp.62-66
• /
• 2013

This study was performed to investigate the physicochemical characteristics of glycoprotein extracted from carrot. We manufactured glycoprotein using natural vegetable raw materials carrots, and then analyzed it's physicochemical properties. The results showed that the nutritional composition of carrot glycoprotein (CG) consisted of 2.35% carbohydrate and 94.2% glycoprotein. There were small amounts of hydroxyproline and glycine known as characteristics of collagen peptide in the amino acid of CG, but there were large amount of glutamic acid and aspartic acid involved in the metabolism of glucose and fat. The calories of CG was 342.1 kcal/100 g and the molecular weight appeared less than 594 Da average molecular weight distribution.

• Applied Chemistry for Engineering
• /
• v.4 no.1
• /
• pp.178-187
• /
• 1993

Degradation of the starch-polyethylene composite film by an activated sludge treatment and a soil burial test was examined. The treated films had deformed structures which were resulted from the removal of starch during the treatments. The added auto-oxidant caused the degradation of the polyethylene matrices and the crosslinking reactions after the oxidation of polyethylene chains as well. As a result of soil burial test, the degradation reaction of the composite film containing corn oil as an auto-oxidant was, however, prevalent : number- and weight-average molecular weight of polyethylene decreased, while the molecular weight distribution increased.

• Polymer(Korea)
• /
• v.27 no.1
• /
• pp.17-25
• /
• 2003

Using atom transfer radical polymerization (ATRP), polystyrene macroinitiators and polystyrene-b-poly(t-butyl acrylate) (PS-b-P(tBA) block copolymers were synthesized by CuBr/PMDETA catalyst system in solution. After hydrolysis, polystyrene-b-poly(acrylic acid), amphiphilic block copolymers, were formed. Subsequent neutralization of polyacid block led to the block ionomers. The molecular weight of the synthesized PS-b-P(tBA) block copolymers was easily-controlled to 5000-10000 and their distributions were less than 1.2. The chemical structures of the synthesized block copolymers were characterized by $^1$H-NMR and FT-IR. In the DSC thermograms, $T_g$ appeared in the vicinity of 100 $^{\circ}C$ because of higher styrene content. In addition, the phase separation of the block ionomers was observed by TEM.

• Polymer(Korea)
• /
• v.24 no.3
• /
• pp.287-298
• /
• 2000

In preparing micron-sized monodisperse polystyrene beads by dispersion polymerization, the conversion, and the particle size and its distribution were affected by the reaction temperature, concentration of the monomer, solvent and initiator, molecular weight and concentration of the steric stabilizer, amount of oxygen existing in the reactor, and an appropriate combination of these starting materials. Ethanol as a dispersing agent, styrene as a monomer, PVP as a steric stabilizer, AIBN as an initiator, DVB as a cross-linking agent and toluene as a co-solvent were the basic materials for the synthesis. The reaction rate and the conversion were increased with the reaction temperature and the amount of DVB from 1 to 4%, and the conversion was saturated after 10 hours of the reaction time. The optimum reaction recipe for the preparation of the monodisperse PS beads was 25% styrene monomer, 0.5% DVB, 25% toluene, 10-15% PVP, and 2 and 4% AIBN, thereby, 3.9~4 ${\mu}{\textrm}{m}$ and 3.4~9.3 ${\mu}{\textrm}{m}$ of polystyrene beads, respectively, were successfully synthesized.

• Parasites, Hosts and Diseases
• /
• v.31 no.4
• /
• pp.353-362
• /
• 1993

The present study was carried out to investigate the localization and isozyme patterns of acid phosphatase and alkaline phosphatase in metacercariae and in adults of F. seoulensis by enzyme-histochemistry method and electrophoresis. Acidphosphatase showed a strong activity at pH 5 in the intestinal caecum of adults, but showed no reactions in the nonsubstrate control and in the inhibitor-treated control. Alkaline phosphatase showed a strong activity at pH 8 in the intestinal caecum and the tribocytic organ of adults, and in the intestinal caecum and in the genital anlagen of metacercariae. In non-denature PAGE, ten bands of protein fraction from the extracts of metacercariae and twenty-two bands from adults were detected. In denature PAGE, two protein bands having molecular weights of 192 kDa and 123 kDa were detected in the metacercariae, but absent from adult stage. In adults, protein fractions of 27.5 kDa, 24.5 kDa, 21.4 kDa, 18 kDa, 16 kDa and 15 kDa were detected. In non-denature PAGE, isozymes of acid phosphatase showed the most strong activity at pH 5, whereas no activity was shown at pH 2 and pH 7. One isozyme 85 kDa, 73 kDa and 62 kDa) in adults.

• Polymer(Korea)
• /
• v.35 no.6
• /
• pp.531-536
• /
• 2011

Homopolymer distribution in block copolymer/homopolymer blends was investigated as a function of homopolymer concentration and homopolymer molecular weight. The deuterated poly(methyl methacrylate) or polystyrene was blended with a deuterated polystyrene-poly(methyl methacrylate) diblock copolymer up to a concentration of 20 wt%. Samples were characterized by small-angle X-ray scattering (SAXS), neutron reflectivity and transmission electron microscopy. The block copolymer with a thin-film geometry formed alternating lamellar microdomains oriented parallel to the substrate surface. By adding the homopolymer, the microdomain structure was significantly disturbed. As a consequence, a poorly ordered morphology appeared when the homopolymer concentration exceeded 15 wt%. Increasing the homopolymer concentration and/or the homopolymer molecular weight caused the microdomains to swell less uniformly, resulting in segregation of the homopolymer toward the middle of the microdomains.