• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.35 no.6
• /
• pp.1309-1320
• /
• 2015

This study made an attempt to analyse the relationship between operation environment and fleet size per route which represents the level of service for inner-city bus service. Regression analysis method has been adopted as main analysis tool and 98 routes of bus operation status in Ulsan city as of 2013 has also been selected for analysis target. Correlation analysis was performed to identify the relationship between dependent and independent variables. There are three types of model for whole sample, type operation, and bus route operation system. These are the results of the current study. 1. The model developed for whole sample of 98 routes is as follows. Y(Fleet Size)=$-4.532+0.00002877*X_1$(Revenue). This model shows that it is necessary to have more than 140 passengers per day to increase fleet size of each bus route in Ulsan. 2. Models developed by type of operation (which are standard, express, and middle sized) are shown below. Stand Bus : Y(Fleet Size)=$-10.954+0.00004283*X_1$(Revenue). It is identified that more than 153 passengers need to use standard bus to increase fleet size per each standard bus, Middle Sized Bus : Y(Fleet Size)=-0.859+0.00001438*X1(Revenue). For middle sized bus, at least 52 daily passengers are needed to increase number of bus in each route. 3. Models developed for each route operation systems are as belows. Joint Operation Group : Y(Fleet Size)=$-4.786+0.00003028*X_1$(Revenue). Individual Operation Group : Y(Fleet Size)=$-2.339+0.00002030*X_1$(Revenue). These model provide similar result which 140 people is the minimum number of passenger to raise the number of vehicles in each route. This result shows that the route operation systems does not affect the raise number of cars significantly.

• The korean journal of orthodontics
• /
• v.28 no.5 s.70
• /
• pp.699-716
• /
• 1998

This study was designed to evaluate the expression of non-collagenous protein in periodontal tissue during the experimental movement of rat incisors, by LSAB(labelled streptavidine biotin) immunohistochemical staining for osteonectin and osteocalcin. Twenty seven Sprague-Dawley rats were divided into a control group(3 rats) and 6 experimental groups(24 rats) where 75g of force was applied from helical springs across the maxillary incisors. Rats of experimental groups were sacrificed at 12 hours, 1, 4, 7, 14 and 28 days after force application, respectively. And the tissues of a control group and experimental groups were studied immunohistochemically and histologically. The results were as follows : 1. Until 28 days after force application, periodontal fibers had been strectched on tension side and compressed in pressure side of all the experimental groups, and the arrangement of periodontal fibers had not been recovered yet. 2. The expression of osteonectin in control group was rare in dentin, cementum and osteocyte, and was mild in odontoblasts and matrix of alveolar bone. 3. The expression of osteocalcin in control group was negative in gingiva, osteoblasts, osteocyte and cementum, and was rare in predentin, capillaries in pulp and periodontal ligament and the matrix of alveolar bone. 4. There was no difference in the expression of osteocalcin or osteonectin in dentin, cementum, pulp, odontoblasts, between of control and of experimental groups. 5. The expression of osteonectin in intermaxillary suture got the peak in 7-day and was declined after 14-day. The expression of osteocalcin remained in a same degree since it became mild in 14-day. 6. The expression of osteonectin in pressure side of periodontal ligament of experimental group was rare, which was similar to control group. But in tension side, it was increased until 14-day aftrer which it was declined. 7. The expression of osteocalcin in periodntal ligament was rare in 12-hour to 14-day, but became severe in 28-day, which was greater in tension side than in pressure side, and in the periodontal fiber next to alveolar bone than to tooth surface. 8. The expression of osteocalcin in alveolar bone was rare until 14-day in pressure side, but became moderate in 28-day. The expression of osteonectin was increased from 7-day by time dependency, which was greater in tension side than in pressure side.

• The Journal of Korean Society for Radiation Therapy
• /
• v.25 no.1
• /
• pp.33-40
• /
• 2013

Purpose: The purpose of this study was to evaluate the possibility to optimize the gated treatment delivery time and maintenance of stable respiratory by the introduction of breath with the assistance of auditory-visual-tactile sense. Materials and Methods: The experimenter's respiration were measured by ANZAI 4D system. We obtained natural breathing signal, monitor-induced breathing signal, monitor & ventilator-induced breathing signal, and breath-hold signal using real time monitor during 10 minutes beam-on-time. In order to check the stability of respiratory signals distributed in each group were compared with means, standard deviation, variation value, beam_time of the respiratory signal. Results: The stability of each respiratory was measured in consideration of deviation change studied in each respiratory time lapse. As a result of an analysis of respiratory signal, all experimenters has showed that breathing signal used both Real time monitor and Ventilator was the most stable and shortest time. Conclusion: In this study, it was evaluated that respiratory gated radiation therapy with auditory-visual-tactual sense and without auditory-visual-tactual sense feedback. The study showed that respiratory gated radiation therapy delivery time could significantly be improved by the application of video feedback when this is combined with audio-tactual sense assistance. This delivery technique did prove its feasibility to limit the tumor motion during treatment delivery for all patients to a defined value while maintaining the accuracy and proved the applicability of the technique in a conventional clinical schedule.

• Geophysics and Geophysical Exploration
• /
• v.9 no.1
• /
• pp.67-72
• /
• 2006

Injection of $CO_2$ into underground saline formations, due to their large storage capacity, is probably the most promising approach for the reduction of $CO_2$ emissions into the atmosphere. $CO_2$ storage must be carefully planned and monitored to ensure that the $CO_2$ is safely retained in the formation for periods of at least thousands of years. Seismic methods, particularly for offshore reservoirs, are the primary tool for monitoring the injection process and distribution of $CO_2$ in the reservoir over time provided that reservoir properties are favourable. Seismic methods are equally essential for the characterisation of a potential trap, determining the reservoir properties, and estimating its capacity. Hence, an assessment of the change in seismic response to $CO_2$ storage needs to be carried out at a very early stage. This must be revisited at later stages, to assess potential changes in seismic response arising from changes in fluid properties or mineral composition that may arise from chemical interactions between the host rock and the $CO_2$. Thus, carefully structured modelling of the seismic response changes caused by injection of $CO_2$ into a reservoir over time helps in the design of a long-term monitoring program. For that purpose we have developed a Graphical User Interface (GUI) driven rock physics simulator, designed to model both short and long-term 4D seismic responses to injected $CO_2$. The application incorporates $CO_2$ phase changes, local pressure and temperature changes. chemical reactions and mineral precipitation. By incorporating anisotropic Gassmann equations into the simulator, the seismic response of faults and fractures reactivated by $CO_2$ can also be predicted. We show field examples (potential $CO_2$ sequestration sites offshore and onshore) where we have tested our rock physics simulator. 4D seismic responses are modelled to help design the monitoring program.

• Journal of The Korean Association For Science Education
• /
• v.22 no.4
• /
• pp.872-881
• /
• 2002

Student questioning is included in the priority of science literacy, to enable students to solve problems by exploring questions, communicating and constructing knowledge(AAAS, 1989). Also, the essence of student questioning in science lies in its function as a link between thinking and learning. But educators did not pay much attention to students' questioning in Korea. The purpose of this study was to investigate the effects of science question enhancement instruction on students' science questioning level and achievement. Also, this study showed the effects of other variables(logical thinking, science achievement, interest, and gender) on students' science questioning level. The pretest-posttest control group design group design was used. The sample was consisted of 80 second grade middle school students in experimental group(Science question enhancement instruction) and 74 students in control group(Traditional learning). Students in both groups were received identical content instruction on the unit 'Structures and functions of plant'. These groups were treated for 15 hours during 6 weeks. Students' questions were rated using the four levels described by the Middle School Students' Science Question Rating Scale(r= .96,)(Cuccio-Schirripa & Steinner, 2000). Science achievement data were collected using a 17 item multiple choice test(Cronbach ${\alpha}$= .84). To investigate students' logical thinking ability, a abridged GALT(Cronbach ${\alpha}$= .69) was used. Five-way ANOVA, ANCOVA, and multiple regression analysis were used to analyze the results. The results indicated that students who received instruction on researchable questioning outperformed those students who were not instructed on high-order questioning(p< .01). Results of correlations indicated that instruction(r= .640), science achievement(r= .311) and logical thinking ability(r= .212) was significantly and positively related with students' questioning level. But, interest and gender did not show any significant correlation with students' questioning level. Science question enhancement instruction was more effective on science achievement than the traditional instruction(p< .01).

• The Journal of Korean Academy of Prosthodontics
• /
• v.47 no.1
• /
• pp.29-38
• /
• 2009

Statement of problem: A casting connection technique is widely used for repair, correction and addition to base metal framework. However, a casting connection technique may increase the risk of failure in clinical situations when high stresses exist. Purpose: The purpose of this study was to investigate the mechanical retentive groove design comparatively to increase the joint strength by using the three-dimensional finite element analysis model of a 3-unit fixed partial denture. Material and methods: Ten finite element models were constructed. (Model A: One retentive groove, Model B: Two retentive grooves, Model C: Three retentive grooves, Model D: Four retentive grooves, Model E: One horizontal groove and two vertical grooves, Model F: Two horizontal grooves and one vertical groove, Model G: One groove with the enlarged dimension, Model H: Two grooves with the enlarged dimension, Model I: One groove with the increased height, Model J: One groove with the increased width of base). The vertical force was applied to the mesial and the distal fossa to the casting connection of mandibular first molar. Results: The main factors, affecting joint strength of casting connection were both the retention between the primary cast and the secondary cast and the thickness of the primary cast remaining after preparing retentive groove. The increase of retentive force, according to the numbers and the dimension of retentive groove had an effect on distributing stress. However, in some cases, the increase of retentive force resulted in the increase of stress by reducing thickness of the primary cast in the connection area. Conclusion: The design of retentive groove that limits number of retentive groove for metal thickness and increases the depth of retentive groove for retention is highly recommended.

• The Journal of Korean Academy of Prosthodontics
• /
• v.47 no.1
• /
• pp.61-69
• /
• 2009

Statement of problem: Porcelain veneers have become a popular treatment modality for aesthetic anterior prosthesis. Fitting porcelain veneers in the mouth usually involve a try-in appointment, which frequently results in salivary contamination of fitting surfaces. Purpose: An in vitro study was carried out to investigate the effect of silane treatment timing and saliva contamination on the resin bond strength to porcelain veneer surface. Material and methods: Cylindrical test specimens (n=360) and rectangular test specimens (n=5) were prepared for shear bond test and contact angle analysis. Whole cylindrical specimens divided into 20 groups, each of which received a different surface treatment and/or storage condition. The composite resin cement stubs were light-polymerized onto porcelain adherends. The shear bond strengths of cemented stubs were measured after dry storage and thermocycling (3,000 cycles) between 5 and $55^{\circ}C$. The silane and their reactions were chemically monitored by using Fourier Transform Infrared Spectroscopy analysis (FTIR) and contact angle analysis. One-way analysis of variance (ANOVA) and Dunnett's multiple comparison were used to analyze the data. Results: FT-IR analysis showed that salivary contamination and silane treatment timing did not affect the surface interactions of silane. Observed water contact angles were lower on the saliva contaminated porcelain surface and the addition of 37% phosphoric acid for 20 seconds on saliva contaminated porcelain increased the degree of contact angle. Silane applied to the porcelain, a few days before cementation, resulted in increasing the bond strength after thermocycling. Conclusion: Within the limitation of this study, it can be concluded that it would be better to protect porcelain prosthesis before saliva contamination with silane treatment and to clean the contaminated surface by use of phosphoric acid.

• Weed & Turfgrass Science
• /
• v.7 no.2
• /
• pp.140-147
• /
• 2018

In Korea, mowing the grass of a grave (Beolcho) is a very important event preceded by Chuseok (Korean thanks giving day) and Si-Hyang (annual ancestral feast). Because Beolcho usually takes place one or two weeks before Chuseok, the traffic accidents on roads are getting worse and safety accidents are getting more and more. Erroneous Beolcho methods can cause the soil to be exposed and cause the loss of soil or the low shoot density of graveyard grass or weed occurrence. Therefore, the dispersion of the Beolcho timing and the approprite method can be import issues. The present study assessed the effects of grass mowing timing and height before Chuseok on the growth of Zoysia japonica and Z. matrella. The mowing timing was evaluated at 1 week, 2 weeks, 3 weeks, and 4 weeks before Chuseok, and the mowing height differently according to the two type of grass. In Z. japonica, the faster mowing before Chuseok, the longer the plant height, and the coverage rate and shoot density were higher. In Z. matrella, the faster mowing, the longer the shoot length, but the coverage rate and shoot density did not show any difference or tendency. As compared to Z. japonica, the plant height of Z. matrella was kept short regardless of the time of mowing. In both grasses, the plant height was shortened when mowing was done at low cutting height, but the coverage rate and shoot density were decreased. In addition, it was shown that it is advantageous to maintain the shoot density of graveyard lawn by 40-50 mm or 30-40 mm cutting above the ground for Z. japonica or Z. matrella, respectively.

• Journal of Korean Society of Forest Science
• /
• v.87 no.3
• /
• pp.391-403
• /
• 1998

The study was carried out to devise a proper measure to increase the income of mountain villagers by producing sap water of Acer mono, and to make the most of sap water as local specialty to contribute to the local economy of mountain villages. All the processes from collecting to marketing of sap water of Acer mono was investigated. The survey was done from mid-January to mid-February in the 3 major sap water collecting regions, Toji-myon Kurey-gun(Piagol area of Mt. Chiri), Okryong-myon Kwangyang city(Mt. Baekun), and Jookhack-ri Sunchon(Mt. Chokey). A total of 90 householders who collect sap water, to say again, 30 householders in each region, were interviewed personally to make up questionnaires. The habitual or general practices about collecting sap water, the selling price, the sales process, labor power to collect and carry down, carrying distance and facilities, sales income and side income, and family income were investigated and examined. Spots of collecting sap water were not concentrated but scattered all over the collecting area. Collecting method, collecting amount, sales process, and selling price varied with the village and region. Sap water was collected by tapping or boring method, the latter of which was widely used in lots of regions except in Sunchon. Although the amount of sap production per family varied with region, the average amount was about 1,350 liters. Of all the sap water collected, 44% was consumed by drinking of on-the-spot visitors and 36% was sold by order, etc. Sap water was sold at the price varying from 10,000 won to 60,000 won per 18 liters. The average selling price was 41,000 won, but selling prices of 43,000 won and 45,000 wan amounted to 38% and 25%, respectively.

• Communications of Mathematical Education
• /
• v.26 no.3
• /
• pp.251-271
• /
• 2012

The purpose of this study is: 1) to determine error sources and the effects of each error source, 2) to investigate optimal measuring conditions from holistic and analytic scoring methods, and 3) to compare the value of reliability between Cronbach's alpha and the generalizability coefficient in self-introduction letter and teacher's recommendation letter based on the generalizability theory in identification of mathematical gifted students by observations and nominations. Data of this study were collected from the science education institute for the gifted attached to the university located within in a capital city for the 2011 academic year. Scores form two raters using holistic and analytic scoring methods in both assessment types were used. The results of this study were as follows. First, as to both assessment types, error sources for people were relatively large regardless of scoring methods. However, error sources for raters in holistic scoring methods had a more significant impact than those of analytic scoring methods. Second, to set optimal measuring conditions in the self-introduction letter and teacher's recommendation letter, if we fixed the number of raters into 2 based on holistic scoring methods, at least 5 and 10 content domains were needed, respectively. In addition, the number of items in teacher's recommendation letter should be more than 3 when we fixed the number of content domains into 4, and the number of items in self-introduction letter should be more than 8 when we fixed the number of content domains into 6 using analytic scoring methods. Third, Cronbach's alpha having only a single source of errors was higher than the generalizability coefficient regardless of assessment types and scoring methods. Hence we recommend that generalizability coefficient based on various error sources such as raters, content domains, and items should be considered to keep a satisfactory level of reliability in both assessment types.