• Journal of the Institute of Electronics and Information Engineers
• /
• v.54 no.2
• /
• pp.16-27
• /
• 2017

IEEE 802.15.6 standard, a Wireless Body Area Network, aims to transfer not only medical data but also non-medical data, such as physical activity, streaming, multimedia game, living information, and entertainment. Services which transfer those data have very various data rates, intervals and frequencies of continuous access to a medium. Therefore, an efficient anti-collision operations and medium assigning operation have to be carried out when multiple nodes with different data rates are accessing shared medium. IEEE 802.15.6 standard for CSMA/CA medium access control method distributes access to the shared medium, transmits a control packet to avoid collision and checks status of the channel. This method is energy inefficient and causes overhead. These disadvantages conflict with the low power, low cost calculation requirement of wireless body area network, shall minimize such overhead for efficient wireless body area network operations. Therefore, in this paper, we propose a medium access scheduling scheme, which adjusts the time interval for accessing to the shared transmission medium according to the amount of data for generating respective sensor node, and a priority control algorithm, which temporarily adjusts the priority of the sensor node that causes transmission concession due to the data priority until next successful transmission to ensure fairness.

• Journal of the Korea Society of Computer and Information
• /
• v.18 no.6
• /
• pp.29-36
• /
• 2013

In wireless sensor networks, energy is the most important consideration because the lifetime of the sensor node is limited by battery. Most of the existing energy efficient routing protocols use the minimum energy path to minimize energy consumption, which causes an unbalanced distribution of residual energy among nodes. As a result, the power of nodes on energy efficient paths is quickly depletes resulting in inactive. To solve these problems, a method to equalize the energy consumption of the nodes has been proposed, but do not consider the link error rate in the wireless environment. In this paper, we propose a uniform energy consumption of cluster-based multi-hop routing mechanism considering the residual energy and the link error rate. This mechanism reduces energy consumption caused by unnecessary retransmissions and distributes traffic evenly over the network because considering the link error rate. The simulation results compared to other mechanisms, the proposed mechanism is energy-efficient by reducing the number of retransmissions and activation time of all nodes involved in the network has been extended by using the energy balanced path.

• Clean Technology
• /
• v.14 no.3
• /
• pp.204-210
• /
• 2008

A series of $V_{2}O_{5}-TiO_2$ xerogel catalysts were prepared by nonhydrolytic sol-gel method and analysed by various characterization techniques. These catalysts showed much higher surface areas and total pore volumes than conventional V$V_{2}O_{5}-TiO_2$ xerogel and impregnated $V_{2}O_{5}/TiO_2$ catalysts. It was found that the textural property of $V_{2}O_{5}-TiO_2$ material varies with the method and conditions of synthesis. Surface vanadates and $TiO_2$ anatase phase are the crucial factors to obtain high catalytic activities. The selective oxidation of hydrogen sulfide in the presence of excess water and ammonia was studied over these catalysts. Xerogel catalysts prepared by non-hydrolytic sol-gel method showed very high conversion of $H_{2}S$ without harmful emission of $SO_2$. The highest catalytic activity shown by these $V_{2}O_{5}-TiO_2$ catalysts may be due to their high surface area and good dispersion of vanadia species in the titania matrix.

• Journal of The Korean Association For Science Education
• /
• v.37 no.4
• /
• pp.625-636
• /
• 2017

The purpose of this study is to compare the differences in the operation form of science academy, science high school, and ordinary high school. We tried to find what kinds of variables differ in operation form based on the perception of the beneficiaries. For this purpose, 288 beneficiaries were surveyed. The groups were divided into three groups according to the high school they graduated from and then the differences among the groups were compared. The results are as follows. First, as a result of comparing the operation form according to high school using the most similar system design, it was confirmed that there are differences in curriculum and teacher variables. Second, as the result of analyzing the perception of curriculum and teacher professionalism based on the education experience of the beneficiary, the satisfaction for science academy was higher, but the satisfaction for science in ordinary high school was lower. Third, the key variables showing the differences in the operation forms between science academy and science high school were the learning contents, learning process and learning environment. The results of this study are expected to be used as basic data for future improvement of gifted education curriculum.

• Culinary science and hospitality research
• /
• v.16 no.4
• /
• pp.15-27
• /
• 2010

As most companies in the world are much interested in the overseas market as well as in the domestic market, many Korean food service enterprises came to focus on extending their branches to the overseas market. However, lack of business strategies including market research, marketing strategies, localization, etc. has made them continue to fail in market entry. The purpose of this study is to develop entry mode of determinants of Korean food service enterprises, considering their characteristic factors and environment factors in the overseas market. To do this, companies which have a head quarter in Korea and over 2 year business experience in the overseas market were chosen and used for a self-administered questionnaire survey. Statistical processing, including descriptive statistics, logistic regressing analysis, and multi regression analysis using an SPSS/PC 12.0 statistical package were conducted The result is as follows. First, explanation suitability was 85% of the entry mode in the overseas market. Second, as business size was smaller, product differentiation was higher, and CEO's will for success in the overseas market was higher, independent entry mode in the overseas market was likely to he chosen. Lastly, as the uncertainty of demand and trade barrier were lower, and a sociocultural gap was smaller, independent entry mode in the overseas market was likely to be chosen.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.27 no.2
• /
• pp.233-245
• /
• 2011

With the use of computed tomography (CT), computer-aided design/computer-assisted machining (CAD/CAM) technology and internet, the implant dentistry has been evolved. The surgical templates made by CAD/CAM technology and precise installation of implants, permit restorations to be inserted immediately after implants have been placed. The advantages of CAD/CAM guided implant procedures are flapless, minimally invasive surgery and shorter surgery time. With this technique, less postoperative morbidity and delivery of prosthesis for immediate function would be possible. A patient with an edentulous maxilla and mandible received 7 implants in mandible using CAD/CAM surgical templates. Prefabricated provisional fixed prostheses were connected immediately after implant installation. Provisional prostheses were evaluated for aesthetics and function during 6 months. Definitive prostheses were fabricated. At 6 months recall appointment, patient's occlusion was slightly changed. To prevent additional adverse effect, regular check-up and occlusal adjustment would be needed.

• Journal of Korea Water Resources Association
• /
• v.47 no.11
• /
• pp.1051-1060
• /
• 2014

This study is attempted to realize an improved computation performance by combining the MPI (Message Passing Interface) Technique, a standard model of the parallel programming in the distributed memory environment, with the DHM(Diffusion Hydrodynamic Model), a inundation analysis model. With parallelizing inundation model, it compared with the existing calculation method about the results of applications to complicate and required long computing time problems. In addition, it attempted to prove the capability to estimate inundation extent, depth and speed-up computing time due to the flooding in protected lowlands and to validate the applicability of the parallel model to the actual flooding analysis by simulating based on various inundation scenarios. To verify the model developed in this study, it was applied to a hypothetical two-dimensional protected land and a real flooding case, and then actually verified the applicability of this model. As a result of this application, this model shows that the improvement effectiveness of calculation time is better up to the maximum of about 41% to 48% in using multi cores than a single core based on the same accuracy. The flood analysis model using the parallel technique in this study can be used for calculating flooding water depth, flooding areas, propagation speed of flooding waves, etc. with a shorter runtime with applying multi cores, and is expected to be actually used for promptly predicting real time flood forecasting and for drawing flood risk maps etc.

• The Journal of Korean society of community based occupational therapy
• /
• v.5 no.1
• /
• pp.55-62
• /
• 2015

Objective : The purpose of this study was to investigate the satisfaction of occupational therapy service for parents of children with disabilities using specialized child-care centers for disabled in Gyeongbuk. Methods : The subjects of this study were 104 parents who have experience in occupational therapy at 14 specialized child-care centers for disabled in Gyeongbuk. A questionnaire was conducted from July, 2014 to March, 2015. Descriptive statistics of frequency, mean, standard deviation, and One-Way ANOVA study were used to analyze data. Results : Disabled children got occupational therapy at first when they were 3.25 years, on average. Duration of occupational therapy use were 31.84 month, on average. The subjects determined to got occupational therapy mostly through consultation nurseries(40.4%). Most of them got speech therapy(78.0%) other than receiving occupational therapy service, responded very necessary to occupational therapy(69.3%). Satisfaction of occupational therapy service were 4.49 point at attitude of occupational therapists, 4.36 point at occupational therapy program, and 4.26 point at environment of occupational therapy room. Attitude of occupational therapists were the highest satisfied. Conclusion : This study would contribute to effective and meaningful occupational therapy through objective view

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.27 no.10C
• /
• pp.1015-1026
• /
• 2002

As per increasing research interest in the field of collaborative computing in recent year, the importance of security issues on that area is also incrementally growing. Generally, the persistency of collaborative system is facilitated with conventional authentication and cryptography schemes. It is however, hard to meet the access control requirements of distributed collaborative computing environments by means of merely apply the existing access control mechanisms. The distributed collaborative system must consider the network openness, and various type of subjects and objects while, the existing access control schemes consider only some of the access control elements such as identity, rule, and role. However, this may cause the state of security level alteration phenomenon. In order to handle proper access control in collaborative system, various types of access control elements such as identity, role, group, degree of security, degree of integrity, and permission should be taken into account. Futhermore, if we simply define all the necessary access control elements to implement access control algorithm, then collaborative system consequently should consider too many available objects which in consequence, may lead drastic degradation of system performance. In order to improve the state problems, we propose a novel access control framework that is suitable for the distributed collaborative computing environments. The proposed scheme defines several different types of object elements for the accessed objects and subjects, and use them to implement access control which allows us to guarantee more solid access control. Futhermore, the objects are distinguished by three categories based on the characteristics of the object elements, and the proposed algorithm is implemented by the classified objects which lead to improve the systems' performance. Also, the proposed method can support scalability compared to the conventional one. Our simulation study shows that the performance results are almost similar to the two cases; one for the collaborative system has the proposed access control scheme, and the other for it has not.

• Journal of the Economic Geographical Society of Korea
• /
• v.12 no.4
• /
• pp.477-493
• /
• 2009

This research aims to examine Korean regional innovation governance, find structural problems, and explore alternative strategies of regional innovation governance. Especially the alternative governance was searched through the case study of Daegu-Kyungbuk mobile cluster, of which formulation Samsung is the anchor institution. Regional innovation governance in this research is defined as a policy system to link knowledge generation & diffusion subsystem and knowledge application & exploitation subsystem, and institutional conditions to steer the system. "Social Capital Assessment Tool (SOCAT)" of the World Bank was utilized for the appreciation of cluster governance. The regional innovation governance of Daegu-Kyungbuk mobile cluster is characterized as production networks dominated by one-to-one relationship between Samsung and hardware/software developers, decentralized R&D networks and policy networks with multiple hubs. Major policy agents have not developed networks with local companies, and rare are interactions between the policy agents. Local companies, especially software developers, responded they have had experiences to cooperate for local problem solving and shared their community goal, however, the degree of trust in major local project leaders is not high. Local hardware/software developers with core technologies need to be cooperative to develop similar technologies or products in Daegu-Kyungbuk mobile cluster. Regional administrative actors, such as the City of Daegu and Kyungsangbuk-do, and diverse innovation-related institutes should build cooperative environment where diverse project-based cooperation units are incessantly created, taken apart, and recreated.