• The Journal of the Petrological Society of Korea
• /
• v.9 no.4
• /
• pp.238-253
• /
• 2000

In the eastern part of the Euiseong Basin acidic~intermediate volcanic rocks widely distribute on the Cretaceous sedimentary basement. Coeval granitic rocks and dyke rocks intruded into the volcanic rocks. Volcanic stratigraphy of study area are andesite lava, dacitic lapilli tuff, dacitic flow-banded lava, rhyolitic bedded tuff, rhyolitic massive tuff, dacitic massive lava, rhyolitlc welded tuff occur from the lower to the upper strata. $SiO_2$ content of the volcanic rocks range from 51 to 74 wt.%. With the increase of $SiO_2$, the contents of $TiO_2$, $Al_2$$O_3$, MgO, FeOT MnO, CaO, $P_2$$O_{5}$ decrease but those of $K_2$O increase. The contents of $Na_2$O show dispersive variation. This trend is quite sim-ilar to the major oxide variation in the volcanic rocks from the Yucheon sub-basin. The geochemical natures indicate that the volcanic rocks in the study area are discriminated to the island-arc type high K to medium K calc-alkaline rocks. The compositional variation of the volcanic rocks can be explained by the plagioclase fractionation of the volcanic magmas originated from similar source materials. The volcanic stratigraphy seems to have formed by at least two eruptive sequences of andesitic to rhyolitic and dacitic to rhyolitic magmas which underwent crystallization differentiation.

• Korean Chemical Engineering Research
• /
• v.50 no.6
• /
• pp.1068-1075
• /
• 2012

Poly(butylene terephthalate) (PBT)/Nylon6,12 core/shell micro fiber were prepared by extrusion molding. To investigate their optimum extrusion conditions, compatibility of PBT/Nylon6,12 blend micro fiber in conformity to their weight ratio and manufacture temperature was explored with SEM morphology and DSC. The alterations in their mechanical properties by extrusion speed were compared and analyzed through a UTM. In comparison with SEM figures, the domain sizes of Nylon6,12 were gradually declined by increasing the extrusion temperature of blends. Furthermore, according to these SEM images, the phase separation between Nylon6,12 domain and PBT matrix became indistinct with increasing of weight percentage of Nylon6,12. In case of DSC, the boundaries of two peaks were almost disappeared when increasing the extrusion temperature and also intervals of each two melting peaks became narrow as increasing the Nylon6,12 ratio. The mechanical properties including tensile strength, elongation, flexural strength and flexural modulus were increased as the increase in the extrusion temperature until $260^{\circ}C$. However, the mechanical properties were actually deteriorated over $260^{\circ}C$. The tensile strength, elongation, flexural strength and flexural modulus at $260^{\circ}C$ were 560 $kg_f/cm^2$, 220%, 807 $kg_f/cm^2$ and 22,146 $kg_f/cm^2$, respectively. These values are more than intermediate values of mechanical properties of PBT and Nylon6,12. These results mean that there is compatibility between PBT and Nylon6,12. Based on the extrusion conditions that produced optimum compatibility of blend, as a result, our group obtained micro fibers with the core/shell structure.

• Food Science of Animal Resources
• /
• v.31 no.6
• /
• pp.944-951
• /
• 2011

An improved cholesterol analysis method was developed for powdered infant formula by gas chromatographic separation after liquid-liquid extraction and partition. In the official Korea Food Standard method for cholesterol analysis, the water phase and solvent phase were not well separated in the case of emulsified foods such as powdered infant formulas and baby foods. For the rapid and simple sample preparation method, an optimized direct saponification condition was established for heating temperature, heating time, and KOH concentration. From the results, the optimum conditions were as follows: heating temperature $90^{\circ}C$, heating time 60 min, and 16 M KOH 10 mL for a 2 g infant formula sample; improved separation condition for gas chromatography was as follows: the initial oven condition was $250^{\circ}C$ for 25 min, the oven temperature was increased to $290^{\circ}C$ by $10^{\circ}C$/min ratio, and finally the oven temperature remained at $290^{\circ}C$for 9 min. The developed method could be implemented for the study of cholesterol, providing the advantages of reduced inspection time and cost in emulsified foods such as infant formula.

• Journal of Korean Ophthalmic Optics Society
• /
• v.18 no.3
• /
• pp.231-239
• /
• 2013

Purpose: To design and fabricate the auto pattern maker for the development. Methods: we got the necessary data, needed in design, by using CAD. Based on the these data, we fabricated the trial product for the development of the auto pattern maker. Results: The auto pattern maker were composed with combinations of many elements; pattern making assembly, control panel, frame attachment and prober unit. The pattern making assembly was comprised of the cutter, the pattern holder, pattern remover and silence cover which could minimize the sound during the cutting process. The control panel was designed to be connected and operated with the main printed circuit board. The prober could get the eye shape data by scanning of 1.8 degrees around the groove of the frame through the encoding data according to the address. After starting, scanning was carried out in two passes, i.e. one right-handed and one left-handed. Communication connector could send the eye shape data from auto pattern maker to outer system with the RS232C transmission system. By using the one-way analysis of variance, we got the error rate of cut pattern size for ${\Phi}22mm$, ${\Phi}55mm$ and ${\Phi}62mm$. Because F-value was 0.510 and p-value was 0.601, no statistically significant differences were found. Also, the mean cutting error of the auto pattern maker was 0.0274 mm. Conclusions: we could succeed in making the trial product by applying it to the development of the auto pattern maker. The role of this auto pattern maker is to find a exact required size of lens to fit the frame by measuring the frame. The acquired data are transferred to outer system for grinding and finishing with patternless process. Also, the trial product can produce pattern to fit the frame. Therefore, it was confidently expected that the optometrists could handily produce pattern to fit the frame with this trial product and dispense the ophthalmic lens because of its efficiency and convenience compared to the past.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.35 no.2
• /
• pp.238-247
• /
• 2006

The purpose of this study was to evaluate school dieticians' performance of nutritional quality control, and further to establish effective and objective standards of nutritional quality control. Data for this study came from 200 school dieticians' responses in the Chungbuk area. The total quality management (TQM)-based questionnaire was structured. The questionnaire consisted of the following four fields (1) performance of nutritional quality control, (2) performance of stepwise food production to maximize nutrient preservation rate, (3) management of documents and records related to nutritional quality control, and (4) other relating matters. The items of the questionnaire were measured on a five-point Likert scale which ranged from 'strongly agree' to 'strongly disagree'. First, the analysis indicated that school dieticians performed 'least' on human resource management', 'mediocre' on nutritional quality control, and best on 'leadership'. Second, the analysis on performance of stepwise food production to maximize nutrient preservation rate showed that dieticians considerably endeavored to maximize nutrients of cooked food, but it was found out that the most of nutrient destruction can be caused by heating during cooking. Third, the result showed that the systematic use of documents and records for nutritional quality control was not sufficiently accomplished, especially in the production phase of food. In addition, the measure by the Pearson correlation coefficient indicated that there was a significant relationship between performance of nutritional quality control and performance of stepwise food production to maximize nutrient preservation rate, and between performance of nutritional quality control and management of documents and records related to nutritional quality control. Finally, the findings of this study suggest that more effort should be exerted to carefully establish TQM-based standards for the improvement of nutritionary quality.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.27 no.1
• /
• pp.1-10
• /
• 1982

Degree of grain shattering which is of varietal character is an important determinant for the magnitude of field loss of grains during harvest and threshing. Seven Indica \times Japonica progeny varieties and four Japonica varieties were subjected to measurements of tensile strength of grains, degree of grain shattering when panicles were dropped at 1.5m above concrete floor, and moisture content of grains (wet basis) during a period 35 to 63 days after heading. In addition, two varieties were tested for the relation of tensile strength of grains to the magnitude of field loss of grains in actual binder harvest. The 11 varieties differed conspicuously in tensile strength of grains and the degree of grain shattering: the weakest average tensile strength of grains of a variety was about 90g and the strongest about 250g with varying standard deviation of 30 to 60g. Three Indica \times Japonica varieties and one Japonica variety shattered I to 30% of the grains under the falling test. The threshold tensile strength of grains allowing grain shattering was estimated to be 180g on average for a sampling unit of 10 panicles, but only the grains having tensile strength weaker than 98g within the samples shattered. A decrease in average tensile strength by 10g below the threshold value corresponded to an increase of 3 to 5% in grain shattering. Most varieties did not change appreciably the tensile strength of grains and degree of grain shattering with delay in time of harvest and showed a negative correlation between the tensile strength and the moisture content of grains. The average tensile strength of grains was negatively correlated linearly with field loss in binder harvest. The average tensile strength for zero field loss in binder harvest was estimated to be 174g and a decrease in the average tensile strength by 10g corresponded to an increase of 40kg per hectare in field loss of grains. Instead of the average tensile strength of grains, the percentage of grains having tensile strength weaker than 100g is recommended as a criterion for the estimation of field loss of grains during harvesting operations as well as a basis of variety classification for grain shattering, since the standard deviation of tensile strength of grains varies much with variety and time of harvest, and individual grains having tensile strength stronger than 98 did not shatter practically.

• Journal of Animal Science and Technology
• /
• v.53 no.4
• /
• pp.283-288
• /
• 2011

This study was conducted to study the environment effects on live weight, carcass weight, dressing percentage, eye muscle area, backfat thickness, and marbling score, which are the carcass traits of Hanwoo, based on the estimates and all the possible regression for the selection of variable and significance test for 231,382 heads that underwent the carcass measurements. The average and standard deviation for the live weight, carcass weight, dressing percentage, eye muscle area, backfat thickness, and marbling score were 654.79${\pm}$91.61 kg, 362.30${\pm}$67.15 kg, 59.52${\pm}$0.03%, 81.79${\pm}$12.21 $cm^2$, 11.39${\pm}$5.40 mm, 4.38${\pm}$2.29, respectively. The live weight, carcass weight, dressing percentage, eye muscle area, backfat thickness, and marbling score for cow were 532.79${\pm}$78.38 kg, 313.40${\pm}$44.90 kg, 56.50${\pm}$0.03%, 75.24${\pm}$10.69 $cm^2$, 11.82${\pm}$5.10 mm, 4.30${\pm}$2.06, respectively, while for bull were 619.74${\pm}$93.27 kg, 376.89${\pm}$48.62 kg, 58.61${\pm}$0.02%, 85.61${\pm}$10.46 $cm^2$, 5.64${\pm}$2.71 mm, 1.41${\pm}$0.83, respectively, and for steer were 681.78${\pm}$70.72 kg, 415.23${\pm}$49.43 kg, 60.19${\pm}$0.02%, 88.29${\pm}$10.27 $cm^2$, 12.71${\pm}$5.23 mm, 5.42${\pm}$1.99, respectively. In the environmental variables selection based on the variables selection method, the examination by carcass traits suggested that the most appropriate model could be determined when five variables were selected for the live weight, carcass weight, dressing percentage, eye muscle area, and four variables for backfat thickness, and marbling score. When they were considered at a time altogether based on multiple traits, it was deemed to be desirable to insert all five variables into the variables for analysis. In addition, high significance was found by carcass traits.

• The Korean Journal of Malacology
• /
• v.28 no.1
• /
• pp.45-54
• /
• 2012

We investigated environmental characteristics of the tidal flat oyster aquafarms to clarifyeffects of the tidal flat environmental factors on growth and mortality of the tidal flat oyster Crassostrea gigas by the Net Bag Rack Culture System in two districts in Western Korea. In this study, we have carried out the basic environmental investigation on growth of the single tidal flat, water quality and sediments, etc. in Taean and Seosan districts, Choongcheongnam-do, where the single tidal flat oyster aquaculture have been performed by the net bag rack culture system. In June 2011 when the final survey carried out at the two districts in western Korea, the mortality in Seosan district was higher than that in Tae-an district. Judging from the results of growth and mortality of the single tidal flat oysters investigated at two sites of Jinsan-ri in Taean and Chang-ri in Seosan districts, two results of Taean district showed higher growth and lower mortality than those of Seosan district. It is assumed that the proper acceptable density possible for growth of the tidal flat seeds and the secure of economics, in case of plastic cultivate net with the size of $50{\times}80cm$, are about 200 individuals. In this study, It was clarified that selection of the suitable sites, the input into the net bag of high quality oyster seeds and selective dispersion in the optimal density of the single tidal flat oyster have an effect on growth and mortality of the tidal flat oyster.

• Restorative Dentistry and Endodontics
• /
• v.32 no.4
• /
• pp.385-396
• /
• 2007

The aims of this study were to compare the shaping effect and safety between single length technique recommended by manufacturer and crown-down technique using Mtwo rotary file and to present a modified method in use of Mtwo file. Sixty simulated root canal resin blocks were used. The canals were divided into three groups according to instrument and the manner of using methods. Each group had 20 specimens. Group MT was instrumented with single length technique of Mtwo, group MC was instrumented with crown-down technique of Mtwo and group PT was instrumented with crown-down technique of ProTaper. All of the rotary files used in this study were operated by an electric motor. The scanned canal images of before and after preparation were superimposed. These superimposed images were evaluated at apical 1 to 8 mm levels Angle changes were calculated. The preparation time, weight loss, instrument failure and binding, canal aberrations, and centering ratio were measured. Statistical analysis of the three experimental groups was performed with ANOVA and Duncan's multiple range tests for post-hoc comparison and Fisher's exact test was done for the frequency comparison. In total preparation time, group MT and group MC were less than group PT. In the aberrations, group MT had more elbows than those of group MC and group PT. The binding of group MC was least and group MT was less than group PT (P < 0.05). Under the condition of this study, crown-down technique using Mtwo rotary file is better and safer method than single length technique recommended by the manufacturer.

• Korean Journal of Weed Science
• /
• v.12 no.2
• /
• pp.144-157
• /
• 1992

The study was conducted to compare the interprete methods and examine the feasibility of mixture use of oxyfluorfen and bensulfuron in controlling principal Paddy weeds, annuals and perennials. Application ratio of both chemicals were obtained from the combinations of 5 levels(0, 5, 10, 15, 20 g ai/ha) of each chemicals, respectively. All the treatments were applied at 5 days after transplanting and water was maintained at 3.0cm in depth. Shoot fresh-weight of weeds was assessed at 35 days after treatments. Data obtained was analysed by Colby, Isobole, Calculus, Regression and EQM method, respectively. The results from the analysis of variance on the principal weeds treated with oxyfluorfen and bensulfuron showed significant interactions at 1% level on both Echinochloa crus-galli and Eleocharis Kuroguwai, and total species at 0.5% level on both Potamogeton distinctus and Cyperus serotinus, but non significant on Scirpus juncoides and Sagittaria pygmaea. Thereafter, the results of the models applied to Echinochloa crus-galli, Eleocharis kuroguwai and total species were as follows ; 1. The Colby method gave values nearly identical to regression estimate method (both multiplicative models) as provided by Akobundu et al. The Colby method and Regression method indicated synergistic toward Echinochloa curs-galli, and total species, but antagonistic toward Eleocharis kuroguwai. 2. The Isobole method shows synergism on Echinochloa crus-galli at $ID_{50}$, and total species at $ID_{60}$ on Eleochari kuroguwai. 3. The Calculus method gave positive signs for the first differentiation and negative signs for the second differentiation except for some rates on Echinochloa crus-galli and total species, but reverse on Eleocharis kuroguwai. These result does not agree with the observed values. 4. ${\theta}$ value from the EQM method was greater than one at all combinations. This result was quite different from those of other methods. 5. The various models did not show the same results, but mixture of oxyfluorfen and bensulfuron tend to have synergistic effect. Weeding effect also was high. Treatment in terms of two chemical combination was expected to reduce rates, and to enhence weeding efficacy compared with single treatment.