• Title/Summary/Keyword: 분산분해

Search Result 427, Processing Time 0.033 seconds

Molybdenum dialkyl dithiocarbamat의 마찰특성

  • 김영환;강부평팔랑;익자정문
    • Proceedings of the Korean Society of Tribologists and Lubrication Engineers Conference
    • /
    • 1989.11a
    • /
    • pp.41-58
    • /
    • 1989
  • 현재 자동차엔진유를 비롯한 각종윤활유에 마찰마모방지제 및 산화방지제로 사용되고 있는 유용성 몰리부덴계 화합물은 윤활제의 첨가제로서 주목받고 있다. 이와 같은 유용성 몰리부덴계 화합물은 윤활제의 첨가제로서 마찰부분의 고온에 의해 열분해함으 2 유화몰리부덴($MoS_2$)을 생성하기 위해서 합성한 것이다. $MoS_2$는 마찰마모 감소제로서 잘 알려져 있지만 고체이기 때문에 마찰면에 COATING 하거나 윤활유에 분산시켜 사용하고 있다. 그러나 윤활유에 분산시키는 것과 마찰면에 흡착시키는 것과는 계면화학적 반대현상이므로 문제가 발생하게 된다. 그러므로 윤활유중에 안정한 분산계를 만들어 사용시에는 비교적 안정한 COLLOID 계가 파손되지 않아야 한다. 그러나 열가학적으로 불안정한 COLLOID 계를 유지하기는 어려운 문제이다. 그러므로 유용성인 몰리부덴계 화합물을 윤활유에 용해시켜 열적 혹은 TRIBOCHEMICAL 적으로 분해해 줌으로서 마찰표면에 $MoS_2$의 생성이 필요하다. 이와같은 목적으로 개발된 유용성 몰리부덴화합물은 마찰마모감소작용 및 산화방지작용의 메카니즘에 관해서는 불투명한 점이 많다. 본 논문은 유용성 몰리부덴계 화합물중 Molybdenum dialkyl dithiocarbamate (이후 MoDTC로 명함)를 윤활유 첨가제로 사용해 마찰실험을 통하여 마찰감소작용의 메카니즘을 해명하고, 특히 마찰표면에 생성될 $MoS_2$막의 효과에 관해 중점을 두고 분위기의 효과로 부터 MoDTC의 마찰감소작용의 인자에 대한 고찰을 행하였다.

  • PDF

Preparation of α-Al2O3 Nanoparticles by flame Spray Pyrolysis (ESP) of Microemulsion (마이크로에멀전의 화염분무열분해(ESP)에 의한 α-알루미나 나노입자의 제조)

  • 이상진;전병세
    • Journal of the Korean Ceramic Society
    • /
    • v.41 no.3
    • /
    • pp.242-246
    • /
    • 2004
  • Nano-sized a-alumina with a narrow distribution was prepared by using Flame Spray Pyrolysis (FSP). The microemulsion of water in oil (W/O) was prepared to make ultrafine droplets for FSP process. Kerosene (fuel) as a continuos phase and Al(NO$_3$)$_3$$.$9$H_2O$ (oxidizer) aqueous solution as a dispersed phase were prepared for microemulsification. The microemulsion with dispersion stability was obtained by adjusting the composition of 80 vol% kerosene, 10 vol% aqueous solution, and 10 vol% emulsifying agent. Microemulsion was sprayed onto the flame by using two-fluid nozzle spray gun under the condition of 0.03 ㎫ air pressure. The synthesized products were $\alpha$-alumina phase with the size of 20 to 30 nm.

Effect of Interfacial Modification on the Characteristics of Poly(ethyl acrylate-co-t-butyl acrylate)/Silica Nanocomposites (폴리(에틸 아크릴레이트-co-t-부틸 아크릴레이트)/ 실리카 나노복합체 특성에 대한 계면 개질의 효과)

  • 진선욱;한건옥;김형일
    • Polymer(Korea)
    • /
    • v.28 no.6
    • /
    • pp.487-493
    • /
    • 2004
  • The distribution of particles, in the mixture of poly(ethyl acrylate-co-t-butyl acrylate) (PEB) emulsion polymer and silica nanoparticles, was determined mainly depending on the pH of the mixture. The weak interfacial interaction was responsible for the severe coagulation of silica particles and the irregular dispersion for these nanocomposites. Methacryloxypropyltrimethoxysilane (MPS) was used to modify both the polymer and the silica. The nanocomposites which were prepared with these modified components had finer dispersion of silica nanoparticles and core-shell morphology due to the strong interfacial interaction. The strong hydrogen bonds were identified for these nanocomposites with FT-IR. The nanocomposites having strong interfacial interaction showed the increased glass transition temperature, the decreased ΔC$_{p}$ , and the increased decomposition temperature of the polymer chains. polymer chains.

A Study on Dyeing Property of Azo Disperse Dyes Containing Ethyleneimine Derivatives Part (II) -Application to Nylon 6.6 Fabrics- (에틸렌이민 유도체를 갖는 아조계 분산염료의 염색성에 관한 연구(II) - 나일론 6.6 섬유에의 응용 -)

  • Sunwoo, Kong Hyun;Burkinshaw, S. M.
    • Textile Coloration and Finishing
    • /
    • v.8 no.5
    • /
    • pp.49-67
    • /
    • 1996
  • 이 연구의 목적은 에틸렌이민 유도체를 갖는 아조계 분산 염료의 나일론 6.6 섬유에의 응용과 최적화된 나일론 염색 조건의 확립이다. 두 쌍의 염료 A-1/A-2와 D-1/D-2의 최대흡수파장(&{\lambda}_{max}&)을 비교할 경우, 아세톤 최대흡수파장(λ$_{max}$)의 차이가 없거나 적어졌다. 세가지 아지리디닐 모노 아조 염료와 이들 염료의 가수분해 된 형태 그리고 디메닐아닐린계 아조 염료의 나일론 6.6 섬유에 대한 염색 및 견뢰도 성질이 조사되었다. 아지리디닐 염료의 나일론 섬유상의 최대 염착은 pH 5에서 얻어졌으며, 염색된 나일론 섬유에서의 용매추출의 경우 최소 염료 추출은 pH 8.0-10.0 에서 얻어졌다. 아지리디닐 염료 염색된 나일론 섬유상의 세탁 견뢰도와 광 견뢰도는 염색 시 pH의 증가에 따라 증가하였으나, pH 8에서의 견뢰도 성질이 pH 10에서와 비교하여 보다 개선되었다. 세가지 아지리디닐 염료가 이들 염료의 가수분해 된 형태 그리고 디메틸아닐린계 아조 염료와 비교해서 나일론 6.6 섬유상에서 보다 개선된 견뢰도를 나타내었고 이는 염료와 섬유간의 공유 결합으로 기인한 것으로 여겨진다.

  • PDF

Biodegradation of petroleum hydrocarbons by bacteria with surfactant producing capability and cell surface hydrophobicity (계면활성제 생성능과 세포 표면 소수성을 가진 세균 균주들에 의한 석유탄화수소의 생분해)

  • Kwon, Sun-Lul;Song, Hong-Gyu
    • Korean Journal of Microbiology
    • /
    • v.53 no.4
    • /
    • pp.265-272
    • /
    • 2017
  • Some bacteria with different mechanisms for hydrocarbon degradation were isolated from oil-contaminated soils in Korea. Isolate Acinetobacter calcoaceticus SL1 showed biosurfactant- producing activity in oil-spreading test, and it exhibited a good emulsifying activity of 43.6 and 54.5% for diesel oil and n-hexane, respectively. It also has high cell surface hydrophobicity which can make it easily attaches to hydrocarbons and degrade them. It degraded 100% of 1,000 mg/L of n-octadecane and naphthalene, respectively in 3 days, 72.3% of 1,000 mg/L diesel oil in 7 days and 78.0% of 10,000 mg/L diesel oil in oil-contaminated soil during 28 days. Isolated strains Bacillus amyloliquefaciens S10 and B. subtilis GO9 can produce biosurfactant and formed 6.34 and 2.5 cm diameter of clear zones, respectively in oil-spreading test. Surface tension of their culture supernatant reduced from 74.6 to 34.4 and 33.3 mN/m, respectively during incubation, and critical micelle concentrations of culture supernatants were 2.0 and 5.9%, respectively. Consortium of A. calcoaceticus SL1 and B. amyloliquefaciens S10 degraded 77.8% of 10,000 mg/L diesel oil in 3 days, which indicated more efficient oil degradation than that by A. calcoaceticus SL1 alone. If these bacteria were applied together as a consortium to oil-contaminated sites, they may show a high removal rate of petroleum hydrocarbons.

Changes of the Cell Wall Structures during Maturation of Jujube Fruits (성숙 중 대추의 세포벽 조직 변화)

  • 신승렬;손미애;김주남;김광수
    • Food Science and Preservation
    • /
    • v.5 no.4
    • /
    • pp.342-345
    • /
    • 1998
  • This study was investigated to the structure of cell wall during maturation for the research of softening of jujube fruits. Cell was hardly combined with each other untill turning stage, but middle lamella of cell wall was splited at mature stage and was observed splited cell. The middle lamella of cell wall was not observed at green mature stage, but was observed at turning stage. Cell wall was degraded at mature stage. It was observed mitochondria, endoplasmic reticulum et. at in jujube fruit of green mature stage, but cytoplasm and organelle was attached on cell wall as vacuole was grown up after turning stage.

  • PDF

Measurement for Determining the Biodegradation of Starch-Filled Polyethylene Film by $\alpha$-Amylase (전분 충전 폴리에틸렌 필름의 아밀레이스 반응에 의한 생분해도 측정)

  • 최수형;강경남박태현신평균
    • KSBB Journal
    • /
    • v.11 no.1
    • /
    • pp.86-91
    • /
    • 1996
  • Optimal reaction condition for the starch hydrolysis by ${\alpha}$-amylase was determined and the sugar produced under the optimal condition was measured for estimating the biodegradation of strach-filled polyethylene film. Optimal ranges of temperature and pH were 70~$80^{\circ}C$ and 6.3~7.3, respectively. The 100 units of ${\alpha}$-amylase per mg starch were enough for the enzyme reaction. Reaction with polyethylene film containing 5%, 10%, 15% and 20% starch in the above condition showed that the sugar produced was proportional to the starch content in film. This relationship provides a calibration curve for determining the starch content of search-filled polyethylene film. The average amount of hydrolyzed starch was about 40% of total starch in film. The rest of the starch is considered to be still dispersed in the film and not to be attacked by ${\alpha}$-amylase. In this experiment, we could obtain the higher biodegradability through the $\alpha$-amylase reaction in the above optimal condition than the reported one which had been Improved by adding surfactant.

  • PDF

Study on Interrelation between the Service Industrial Production Index and the Service Industrial Wholesale and Retail Index (서비스업생산지수와 서비스업도소매지수와의 상호연관성에 관한 연구)

  • Kim, Joo Il
    • Journal of Service Research and Studies
    • /
    • v.6 no.1
    • /
    • pp.83-95
    • /
    • 2016
  • We examine the information transmission between the Service Industrial Production Index and the Service Industrial Wholesale and Retail Index, based on the returns data offered by the Korea Bank. The data includes daily return data from January 2000 to September 2015. Utilizing a dynamic analytical tool-the VAR model, Granger Causality test, Impulse Response Function and Variance Decomposition have been implemented. The results of the analysis are as follows. Firstly, results of Granger Causality test suggests the existence of mutual causality the Service Industrial Production Index precede and have explanatory power the Service Industrial Wholesale and Retail Index However the results also identified a greater causality and explanatory power of the Service Industrial Wholesale and Retail Index over the Service Industrial Production Index. Secondly, the results of impulse response function suggest that the Service Industrial Production Index show immediate response to the Service Industrial Wholesale and Retail Index and are influenced by till time 5 From time 2, the impact gradually disappears. Also the Service Industrial Wholesale and Retail Index show immediate response to the Service Industrial Production Index and are influenced by till time 2.5, the impact gradually disappears. Lastly, the variance decomposition analysis shows that the changes of return of Service Industrial Production Index are dependent on those of the Service Industrial Wholesale and Retail Index. This implies that returns on the Service Industrial Production Index have a significant influence over returns on the Service Industrial Wholesale and Retail Index. It contributes to the understanding of market price formation function through analysis of detached the Service Industrial Production Index and Service Industrial Wholesale and Retail Index. Finally, our results can be used as a guide by the Korea Bank and Republic of Korea and as well as Statistics Korea.

Study on Lead-Lag Relationship between Individual Spot and Futures of Communication Service Industries: Focused on KT and SK Telecom (통신서비스 업종 개별주식 현물과 선물 간 선도-지연 효과: 한국통신과 SK텔레콤을 중심으로)

  • Kim, Joo Il
    • Journal of Service Research and Studies
    • /
    • v.5 no.1
    • /
    • pp.91-103
    • /
    • 2015
  • We examine the information transmission between the KT Spot and the KT Futures Index, the SK Telecom Spot and the SK Telecom Futures Index, based on the returns data offered by the Korea Exchange. The data includes daily return data from 1 January 2012 to 31 December 2014. Utilizing a dynamic analytical tool-the VAR model, Granger Causality test, Impulse Response Function and Variance Decomposition have been implemented. The results of the analysis are as follows. Firstly, results of Granger Causality test suggests the existence of mutual causality the KT Futures Index and the SK Telecom Futures Index precede and have explanatory power the KT Spot and the SK Telecom Spot However the results also identified a greater causality and explanatory power of the KT Spot and the SK Telecom Spot over the KT Futures Index and the SK Telecom Futures Index. Secondly, the results of impulse response function suggest that the KT Futures Index show immediate response to the KT Spot and are influenced by till time 4. From time 2, the impact gradually disappears. Also the SKT Futures Index show immediate response to the SKT Spot and are influenced by till time 4. From time 2, the impact gradually disappears. Lastly, the variance decomposition analysis shows that the changes of return of the KT Spot and SKT Spot are dependent on those of the KT Futures Index and the SK Telecom Futures Index. This implies that returns on the KT Spot and SKT Spot have a significant influence over returns on the KT Futures Index and the SK Telecom Futures Index. It contributes to the understanding of market price formation function through analysis of detached the KT Spot and the KT Futures Index, the SK Telecom Spot and the SK Telecom Futures Index.

RF 플라즈마를 이용한 실리콘 나노입자의 합성 및 태양전지 응용에 관한 연구

  • An, Chi-Seong;Kim, Gwang-Su;Kim, Tae-Seong
    • Proceedings of the Korean Vacuum Society Conference
    • /
    • 2011.02a
    • /
    • pp.198-198
    • /
    • 2011
  • 단분산 결정질 실리콘 나노입자 (<10 nm)는 양자점 효과로 인한 선택적 파장 흡수가 가능하므로 태양전지 분야에 응용 가능성이 크다. 특히 입경의 크기가 작아지면 부피대비 표면적이 넓어지기 때문에 태양빛 흡수 면적이 증가한다. 따라서 입자의 크기는 태양전지에서 효율을 결정하는 중요한 요소 중 하나이다. 이러한 이유에서 plasma arc synthesis, laser ablation, pyrolysis 그리고 PECVD (Plasma Enhanced Chemical Vapor Deposition) 등이 실리콘 나노입자를 합성하는데 연구되어 왔으며, 특히 PECVD는 입자 생성과 동시에 균일한 증착이 이루어질 수 있기 때문에 태양전지 제작 시 공정 효율을 높일 수 있다. PECVD를 이용한 나노입자 합성에서 입경을 제어하는데 중요한 전구물질은 Ar과 SiH4가스이다. Ar 가스는 ICP (Inductively Coupled Plasma) 챔버 내부에 가해준 전력을 통해 가속됨으로써 분해되어 Ar plasma가 생성된다. 이는 공급되는 SiH4가스를 분해시켜 핵생성을 유도하고, 그 주위로 성장시킴으로써 실리콘 나노입자가 합성된다. 이때 중요한 변수 중 하나는 핵생성과 입자성장시간의 조절을 통한 입경제어 이다. 또한 공급되는 가스의 유량은 입자가 생성될 때 필요한 화학적 구성비를 결정하므로 입경에 중요한 요소가 된다. 마지막으로 공정압력은 챔버내부의 plasma 구성 요소들의 평균 자유 행로를 결정하여 SiH4가 분해되어 입자가 생성되는 속도와 양을 제어한다. PECVD를 이용한 실리콘 나노입자 형성의 주요 변수는 RF pulse, 가스(Ar, SiH4, H2)의 유량, Plasma power, 공정압력 등이 있다. 본 연구에서는 RF (Radio Frequency) PECVD방법을 이용하여 실리콘 나노입자를 만드는데 필요한 여러 변수들을 제어함으로써 이에 따른 입경분포 차이를 연구하였다. 또한 SEM (Scanning Electron Microscopy)과 SMPS (Scanning Mobility Particle Sizer)를 이용하여 각 변수에 따라 생성된 나노입자의 입경과 농도를 분석하였다. 이 중 plasma power에 따른 입경분포 측정 결과 600W에서 합성된 실리콘 나노입자가 상당히 단분산 된 형태로 나타남을 확인할 수 있었고 향후 다른 변수의 제어, 특히 DC bias 전압과 열을 가함으로써 나노입자의 결정성을 확인하는 추가 연구를 통해 태양전지 제작에 응용 할 수 있을 것으로 예상된다.

  • PDF