• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 2002.07a
• /
• pp.188-194
• /
• 2002

버섯의 감압건조시험을 할 수 있는 요인시험장치를 제작하여 시험한 결과를 요약하면 다음과 같다. 가. 댐퍼조절방식 감압건조장치로 건조시험한 결과, 표고버섯은 건조온도 5$0^{\circ}C$에서는 나타나 건조실 압력에 따른 건감률의 변화는 크게 나타나지 않았으나, 건조온도 6$0^{\circ}C$에서 건조실 내부압력이 990hPa일 때 4.57%/hr로 1,013hPa에 비해 높게 나타났으며, 색차면에서는 온도 5$0^{\circ}C$일 때 건조실 내부 압력이 낮아질수록 변화가 적은 것으로 나타났고, 수축률은 압력별로 거의 변화가 없었으나, 건조온도 6$0^{\circ}C$, 압력 990hPa에서 다른 조건에 비해 양호한 것으로 판단되었으나 건조실 내부에 공기분배가 일정하지 않고, 건조실 내부압력 강하성능이 떨어지는 문제점이 발생하여 솔레노이드를 이용한 압력조절방식으로 보완 제작하여 건조시험을 실시하였다. 나. 솔레노이드방식 감압건조장치로 건조시험 한 결과, 표고버섯은 열풍온도 5$0^{\circ}C$, 건조실 내부압력 940-980hPa에서 건감률 2.69%w.b./hr, 갓의 복원률 90.1%로 가장 높았고, 색차 및 수축률이 가장 낮은 것으로 나타났으며, 건조실 내부압력을 900-940hPa로 고정하고 열풍온도를 40, 50, 6$0^{\circ}C$로 표고버섯을 시험한 결과 건감률은 6$0^{\circ}C$일 때 가장 높았으나, 색차, 수축률, 복원률을 고려할 경우 열풍온도 5$0^{\circ}C$가 가장 적합한 것으로 판단된다. 다 솔레노이드방식 감압건조장치로 건조한 표고버섯으로 품위에 대한 유의성 검증결과, 표고버섯의 경우 온도별로는 색택과 복원률, 건조실 내부 압력별로는 수축률, 복원률에서 유의차가 있는 것으로 나타났다. 라. 본 연구에서 구명된 감압건조특성을 기초로 하여 배치식 감압건조기를 설계 제작에 활용하고자 한다.

• The KIPS Transactions:PartC
• /
• v.12C no.3 s.99
• /
• pp.317-322
• /
• 2005

The existing certificate based authentication or identification just verifies whether the owner of private key corresponding to public key of certificate is the DN user set in the user field in the certificate or not, then we cannot find out who is the actual private key owner in a real world. To make up for this weak points, the method to insert the identification number like the resident registration number into the certificate extension field is applied as a technical standard to current domestic PKI system. In this paper, we propose the ECC based integrated identification, identification number checking and key management protocol providing user validation during the login.

• Proceedings of the KIEE Conference
• /
• 2011.07a
• /
• pp.1232-1233
• /
• 2011

본 개발은 에너지 수요관리, 전력품질감시, 전기안전감시 및 설비감시가 가능한 정보통신실 기반설비용 전원분배장치 운용 S/W 개발에 관한 것으로써, 분전반 단위의 전력 및 에너지 관련정보, 전기기기 및 에너지 상태 정보, 장치 상태 정보를 실시간으로 취득 원격에서 감시 및 분석/통계 할 수 있다.

• Proceedings of the Korean Information Science Society Conference
• /
• 2005.07a
• /
• pp.205-207
• /
• 2005

센서 네트워크는 않은 수의 센서 노드들로 구성된 네트워크로 센서를 통한 주변 정보 감지 및 감지된 정보를 처리하는 기능을 수행한다. 최근 유비쿼터스 컴퓨팅 개념의 도입과 함께 이를 실생활에 구현하기 위한 기반 기술로 큰 관심을 모으고 있다. 그러나 센서 네트워크의 일상 생활 시스템에서의 의존도가 높아질수록 이로 인한 위험성 또한 높아 질 수밖에 없다. 본 논문에서는 센서 네트워크에서의 보안 서비스를 제공하기 위하여 필수적인 키 관리 기술을 고찰하고 효율적인 키 관리 방법을 제안하고자 한다. 센서 네트워크의 구축 시 센서 노드들의 배치 특성을 고려하여 키 스트링 풀을 설정하고, 배치된 센서 노드의 위치에 따라 필요한 키를 집중적으로 분배하여 센서 네트워크 내의 공통 키 설정 확률을 높이고 센서 노드의 메모리 소모량을 줄이는 키 관리 방법을 고안하였다.

• The KIPS Transactions:PartC
• /
• v.18C no.4
• /
• pp.227-236
• /
• 2011

IPTV(Internet Protocol Television) is one of the typical businesses which are the convergence of Broadcast and Communication. It provides broadcasting service using IP networks. Recently, IPTV service is developed to Mobile IPTV or Open IPTV. Especially, Open IPTV uses open platform so not only service providers but also general users can provide contents to other users. Open IPTV system has many content providers, so existing security solution of IPTV cannot be adopted. In this paper, we suggest user authentication and key distribution mechanism on Open IPTV. Our proposed mechanism is based on Kerberos, so it can support distribution environment such as Open IPTV. We demonstrate that proposed mechanism can guarantee secure transmission of contents and reduce the delay of user authentication on Open IPTV system compared to other authentication mechanisms. We also compare our proposal and other mechanisms in various aspects, and analyze efficiency and safety of proposed mechanism. As a result, we insist that this mechanism satisfies the security requirements for IPTV.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.7
• /
• pp.726-733
• /
• 2016

In this study, a computer simulation of the three types of air distribution systems, open type system, aisle partition system and aisle containment system, to evaluate the applicability of the aisle partition system on a data center server room. The variables of the simulation were the height and location of the partition fixed on the top server rack. The energy efficiency of the air distribution systems were confirmed to be excellent in the order of the aisle containment system, aisle partition system, and open type system. In the cold aisle partition system, the height of the partition that can be effective in saving cooling energy by obstructing sufficient air recirculation was found to be more than 0.9m. In the hot aisle partition system, the height of the partition was found to be more than 0.8m.

• 한국IT서비스학회:학술대회논문집
• /
• 2008.05a
• /
• pp.383-388
• /
• 2008

본 연구에서는 IT인력을 대상으로 개인특성과 조직특성이 경력만족 및 경력전망, 그리고 경력몰입에 미치는 영향과 경력만족 및 경력전망의 매개효과를 연구하였다. 개인특성에는 성장욕구강도, 자아존중감, 경력계획을, 조직특성에는 분배공정성, 성장기회제공, 경력관리를 선정하였으며 매개변수로는 경력만족 및 경력전망을 선정하였다. IT 인력의 경력몰입을 실증적으로 연구하기 위해 국내 IT관련 업체에 종사하고 있는 개발자 및 전산실 직원들을 대상으로 설문조사를 실시하였다. 설문지는 총 220부를 배포하여 195부를 회수하였으며 회수된 설문지를 토대로 요인분석과 회귀분석을 이용하여 가설을 검증한 결과는 다음과 같다. 첫째, 경력성공 변수인 경력만족과 경력전망은 경력몰입에 유의미한 영향을 미치는 것으로 나타났다. 둘째, 개인특성 중 자아존중감이 경력만족에 가장 큰 영향을 미치는 것으로 나타났고 조직특성 중 분배공정성 및 성장기회제공 등에 대한 지각 정도가 높을수록 경력전망에 유의미한 영향을 미치는 것으로 나타났다. 셋째, 경력만족과 경력전망이 경력몰입에 미치는 매개효과를 살펴본 결과 부분적인 매개효과를 나타냈다.

• The Korean Journal of Nuclear Medicine Technology
• /
• v.18 no.1
• /
• pp.110-114
• /
• 2014

Purpose: The advancement in PET/CT test devices has decreased the test time and popularized the test, and PET/CT tests have continuously increased. However, this increases the exposure dose of radiation workers, too. This study aims to measure the radiation shielding rate of $^{18}F-FDG$ with a strong energy and the shielding effect when worker wore an apron during the PET/CT test. Also, this study compared the shielding rate with $^{99m}TC$ to minimize the exposure dose of radiation workers. Materials and Methods: This study targeted 10 patients who visited in this hospital for the PET/CT test for 8 days from May 2nd to 10th 2013, and the $^{18}F-FDG$ distribution room, patient relaxing room (stand by room after $^{18}F-FDG$ injection) and PET/CT test room were chosen as measuring spots. Then, the changes in the dose rate were measured before and after the application of the APRON. For an accurate measurement, the distance from patients or sources was fixed at 1M. Also, the same method applied to $^{99m}TC's$ Source in order to compare the reduction in the dose by the Apron. Results: 1) When there was only L-block in the $^{18}F-FDG$ distribution room, the average dose rate was $0.32{\mu}Sv$, and in the case of L-blockK+ apron, it was $0.23{\mu}Sv$. The differences in the dose and dose rate between the two cases were respectively, $0.09{\mu}Sv$ and 26%. 2) When there was no apron in the relaxing room, the average dose rate was $33.1{\mu}Sv$, and when there was an apron, it was $22.3{\mu}Sv$. The differences in the dose and dose rate between them were respectively, $10.8{\mu}Sv$ and 33%. 3) When there was no APRON in the PET/CT room, the average dose rate was $6.9{\mu}Sv$, and there was an APRON, it was $5.5{\mu}Sv$. The differences in the dose and dose rate between them were respectively, $1.4{\mu}Sv$ and 25%. 4) When there was no apron, the average dose rate of $^{99m}TC$ was $23.7{\mu}Sv$, and when there was an apron, it was $5.5{\mu}Sv$. The differences in the dose and dose rate between them were respectively, $18.2{\mu}Sv$ and 77%. Conclusion: According to the result of the experiment, $^{99m}TC$ injected into patients showed an average shielding rate of 77%, and $^{18F}FDG$ showed a relatively low shielding rate of 27%. When comparing the sources only, $^{18F}FDG$ showed a shielding rate of 17%, and $^{99m}TC$'s was 77%. Though it had a lower shielding effect than $^{99m}TC$, $^{18}F-FDG$ also had a shielding effect on the apron. Therefore, it is considered that wearing an apron appropriate for high energy like $^{18}F-FDG$ would minimize the exposure dose of radiation workers.

• The Korean Journal of Nuclear Medicine Technology
• /
• v.14 no.2
• /
• pp.177-180
• /
• 2010

Purpose: As PET test came to be covered by the pay system of medical insurance (July 1, 2006) and the needs for it becoming increased for laboratory purpose, it became necessary to purchase expensive medical equipments to solve those problems. However, as most of equipments that are operated by cyclotron are very expensive as to amount from tens of millions up to hundreds of millions of won, it is difficult to purchase those equipments from the point of medical organizations. It may be possible to self manufacture those equipments with least costs if their parts functions that meets the operators demands. The Nuclear Medicine department of National Cancer Center (NCC) is trying to manufacture and use equipments that can be made with least costs, including introducing 2 medical equipments that can improves the operator's works. Materials and Methods: Example 1: Self production of radioisotope($^{18}F$) divider was fabricated. The NCC's Nuclear Medicine department acquired one acrylic panel, seven 3-way valve, tubing etc. that can be found in the market to make the main body of divider in cooperation with biomedical engineering, and placed them inside hot cell, and installed switching box outside of hot cell to make it possible to control them from outside. This main body of divider were placed in radioisotope transfer line that are manufactured in the cyclotron. Example 2: Self production of $^{18}F$-FDG automated divider was fabricated. The NCC's Nuclear Medicine department used cavro pump syringe that consists the main body of divider in cooperation with biomedical engineering, biomedical engineering developed programs that divides a certain amount. $^{18}F$-FDG automated divider is placed inside hot cell, and cable chords were used in the equipment, and then it was connected to PC outside hot cell to make it possible to control the $^{18}F$-FDG automated divider. Results: From the NCC's Nuclear Medicine department tests that were carried out from March, 2007 until now, we found out that radioisotope can be sent to radiopharmaceuticals composite module we want, and from the tests that are carried out at NCC's Nuclear Medicine department using $^{18}F$-FDG automated divider since August, 2009 it was possible to distribute radiopharmaceuticals into vial intended. Conclusion: Through the two examples above, we found out that costs can be reduced by self manufacturing expensive equipments from NCC's cyclotron room with least costs. Also, it decreased radiation exposure dose on workers, and set up problem solving processes in cooperation with lots of parties related.

• The Korean Journal of Nuclear Medicine Technology
• /
• v.22 no.2
• /
• pp.84-87
• /
• 2018

Purpose The radiopharmaceutical used in the nuclear medicine department is used only for the specific patient according to the prescription or instruction of the doctor without selling, so it is dispensed and it is distributed and used for the examination. Radiopharmaceuticals administered to patients should be managed appropriately as well as radiation safety management during dispensation. The purpose of this study is to investigate microbial contamination during dispensation of radiopharmaceuticals Materials and Methods This study distinguished between general workbench and clean workbench and performed three tests. First, microbial cultivation test of radiopharmaceutical prepared and dispensed in general workbenches and sterile workbenches were carried out five times, respectively. The second test was performed settle plate method three times before and after the use of the exhaust filter. Finally, Adenosine Triphosphate (ATP) measurement was performed in each workbench to measure bacterial counts. In addition, ATP measurement were carried out by designating locations and items that may be contaminated during dispensation. Results In the microbial culture test, no microorganisms were detected in both samples. In the settle plate method, it was detected without using of the exhaust filter in a general workbench once. In the ATP measurement test, it was measured at the level of 400 RLU or less, which is the standard value of contamination, in both workbenches surface. In additional ATP measurement test, the refrigerator handle in the distribution room was measured above the reference value of 1217 RLU, the vacuum vial shield of the Tech Generator at 435 RLU, and the syringe holder at 1357 RLU. After environmental disinfection, the results were reduced to 311 RLU, 136 RLU, and 291 RLU. Conclusion No contamination by bacteria was found in both workbenches. However, microbial contamination may occur if the use of an exhaust filter or proper hand hygiene is not achieved. Regular inspections and management for aseptic processing themselves will be necessary.