• Proceedings of the Korean Nuclear Society Conference
• /
• 1995.05b
• /
• pp.733-738
• /
• 1995

$UO_2$ 및 CeO$_2$ 분말을 turbular mixer에서 혼합, 또는 attritor mill에서 분쇄한 후, 각 분말의 특성변화와 이에 따른 소결특성의 변화를 관찰하였다. 혼합된 분말은 평균입자크기와 비표면적이 각각 22.9$\mu\textrm{m}$, 5.1g/㎤이었고, 2시간 분쇄된 분말은 0.5$\mu\textrm{m}$, 6.7g/㎤이었다. 혼합분말로 성형할 경우의 소결밀도는 성형압력의 증가에 관계없이 약 9.6 g/㎤로서 매우 낮았고, 2시간 분쇄된 분말은 10.35 9/㎤ 이상으로 나타나, 혼합핵연료 소결체 제조시 분쇄공정이 반드시 필요함을 나타내었다. 분쇄된 분말을 환원성분위기에서 소결할 경우에는 분쇄시간이 증가함에 따라 결정립이 8$\mu\textrm{m}$까지 증가하였는데 이것은 CeO$_2$ 분말의 미세화와 함께 Ce 성분이 균질 하게 분포되었기 때문으로 사료된다. 그러나 산화성분위기에서는 분쇄시간이 증가할 때 평균 결정립크기는 6$\mu\textrm{m}$로서 변화가 거의 없었다.

• Food Science and Preservation
• /
• v.21 no.3
• /
• pp.388-395
• /
• 2014

Six types of mixed cereals powder were prepared using different mixing ratios of barley, proso millet, sorghum, and adlay, and their nutritional components and functionalities were analyzed. The mixed cereals powders contained high levels of crude protein. The free amino acid and mineral contents of Sample E were the highest among all the samples. Fructose, glucose, sucrose, and maltose were detected as the four major free sugars in all the mixed cereals powders, and Sample D had the highest amount of reducing sugar among all the samples. The total polyphenol and total flavonoid contents of Sample F were significantly higher than those of the other samples. Sample C showed the highest level of DPPH radical scavenging activity and reducing power. As for the ABTS radical scavenging activity, the $IC_{50}$ of Sample D was the lowest among all the samples, but did not significantly differ from that of Sample C. Therefore, we suggest 2:2:1:1 (in Sample D) as the best mixing ratio of barley, proso millet, sorghum, and adlay to produce a mixed cereals powder with excellent nutritional value and antioxidant activities.

• Proceedings of the Korean Nuclear Society Conference
• /
• 1998.05b
• /
• pp.256-261
• /
• 1998

Uranium silicide는 우수한 조사안정성을 가지는 유망한 연구로용 저농축 분산형 핵연료 소재이나 상대적으로 낮은 uranium 함량으로 인해 고출력에 필요한 8~9g-U/㎤ 정도의 uranium 충진 밀도를 얻기 위해서는 Al기지내에 uranium silicide 핵연료 입자의 부피분율을 높여주는 것이 필요하다 핵연료 입자의 부피분율을 높이기 위하여는 핵연료봉의 Al 기지내에 핵연료 입자가 균일하게 분포되어야 한다. 균질한 핵연료 심재를 제조하기 위해서는 핵연료 입자와 알루미늄과의 균일한 혼합이 중요하며 이러한 혼합체내의 분말에 대한 균질도를 정확히 평가하는 방법의 개발이 필요하다. 본 연구에서는 혼합분말의 충진시 겉보기 밀도 측정을 통한 조성의 표준편차를 구하는 방법과 X-ray image 분석법을 새로운 균질도 평가방법으로 제시하였다. 구형의 U$_3$Si분말과 Al분말의 혼합시 drum 회전법의 경우에는 밀도차에 의한 segregation이 발생되고 있으나, Spex mill 혼합법의 경우에는 균질도가 향상되었다. 45-150$\mu\textrm{m}$의 분말크기 분포를 갖는 구형 U$_3$Si의 경우가 작은 입자들이 큰 입자들 사이를 효과적으로 채울 수 있기 때문으로 균일한 분포를 갖는 것으로 생각되며, 밀도차가 큰 U$_3$Si의 경우는 밀도차가 작은 구형 Cu-Sn 혼합체에 비해 균질도가 저하됨을 확인하였다. 겉보기 밀도 측정에 의한 균질도 측정평가와 X-ray image 분석법과의 관계에서는 같은 경향성을 찾을 수 있었다.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.42 no.2
• /
• pp.141-145
• /
• 1997

The long wave infrared which is ranged to 4～1, 000 ${\mu}{\textrm}{m}$ is a kind of electromagnetic wave, and the wave is being absorbed by higher plant easily. The absorbed wave in the plant promotes the metabolism of plant cell by way of resonance with the water molecules of plant cell. This experiment was carried out to determine the effect of long wave infrared radiation ceramic on growth of rice seedling, and to make the optimum mixture rate of ceramic powder when ceramics was mixed with bed soil at 4, 8, 12, 16％ levels for machine transplanting. The results of this study indicate that the growth of the seedling significantly higher in the treatment sites than that of control sites. However, there was no significant differences in dry matter weight between the treatment and control sites. At the 9.6％ mixing ratio, the highest growth of rice seedling was found.

• Food Science and Preservation
• /
• v.13 no.4
• /
• pp.483-489
• /
• 2006

Considering the development of fusion ingredients rom red ginseng and Cheonggukjang (soybean-fermented food), their commercial powders were evaluated in their Hunter's colors, volatile compounds, and sensory properties depending on manufacturing companies and mixing ratio of both powdered products. Hunters L, a and b values of red ginseng powders were $75.56\sim85.50,\;1.90\sim6.30,\;and\;23.29\sim35.08$, respectively, while those of Cheonggukjang powders were $64.96\sim71.69,\;4.64\sim8.30,\;and\;30.45\sim36.50$, respectively. Volatile compounds were mainly composed of hexanal, $\beta-pinene$, methyl benzene, 3,5-methyl propyl nonane, 2-propanone, decane, and 2,8-dimethyl undecane in red ginseng samples, and of 2,3-butanedione, decane, 2,2,7,7-tetramethyl octane, and 3-methyl butanal in Cheonggukjang samples. Total volatiles of the mixed samples decreased as ginseng decreased and Cheonggukjang increased. The mixed sample of both red ginseng and cheonggukjang in same amounts was the highest in its sensory acceptability, which was composed in the order of 2-propanone, 2-butanone, pentane, hexanal and 3-methyl butanal. The above results indicate that red ginseng and Cheonggukjang showed a potential as fusion ingredient for preparing new functional produce through further processing.

• The Korean Journal of Rheology
• /
• v.2 no.1
• /
• pp.67-78
• /
• 1990

세라믹 분말의 사출성형성을 평가하기 위하여 다양한 혼합체 시스템에 대한 혼합도 와 유변학적 성질을 질화규소 미세분말의 부피비를 변화시키면서 조사하였다. 열가소성 결 합체 시스템은 폴리에틸린 폴리에틸렌 왁스 그리고 미소량의 첨가제를 혼합하여 사용하였 다. 혼합성능을 평가하기 위하여 비분산혼합에서는 총접촉면적비를 그리고 분산혼합에서는 총파괴표면적비를 혼합척도로서 사용하여 정성적으로 모형화하였다. 사용된 혼합기내의 유 동장을 해석하기 위하여 뉴우톤유체를 가정하여 유동해석을 수행하였다. 혼합물의 혼합도는 각각 5분 30분 동안 혼합된 시편을 주사전자현미경 사진에 의해 관찰하여 평가하였다. 또한 혼합물의 사출성형성 그리고 혼합질 점도 토우크 곡선 사이의 관계를 규명하기 위하여 전단 변형를 속도를 따른 점도를 모세관 점도계를 사용하여 측정하였으며 질화규소의 부피비가 60%일 때까지는 만족할 만한 성형성과 혼합질을 가짐을 알 수 있었다.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2003.11a
• /
• pp.96-96
• /
• 2003

비정질 합금은 기존 결정질 합금에서는 얻을 수 없는 독특한 물리적, 화학적, 기계적, 전자기적 특성을 나타내는 것으로 알려져 있다. 비정질을 형성하기 위해서는 매우 큰 냉각속도가 필요하므로 제조 가능한 비정질 합금은 분말, ribbon, 박판 형태로 제한되어 있다. 최근 비정질 분말 제조 및 벌크 비정 질에 관한 연구는 많은 발전을 보아 왔지만, 아직도 고청정 비정질 합금 분말의 제조와 대량 생산화 관해서는 많은 연구가 요구된다. 본 연구에서는 고청정 Ni-Zr-Ti-Si-(Sn)계 벌크 비정질 분말을 가스분무법으로 제조하였다. 제조된 합금 분말은 각 입도 별로 구분하여, XRD 분석을 통하여 비정질 형성 가능 입도을 분석하였다. 분말의 외형은 SEM으로 분석하였으며, 미세구조는 TEM을 사용하였다. 열적특성은 DSC 분석으로 조사하였다. 또한 제조한 비정질 분말의 미세구조와 비교하기 위하여 Tg와 Tx 온도범위에서 열처리 한 분말의 미세구조를 분석하였다. XRD 분석 결과, 가스분무법으로 제조된 Ni-Zr-Ti-Si-(Sn) 분말 중에서 75$\mu\textrm{m}$ 이하의 분말은 비정질상을 가졌으며, 75$\mu\textrm{m}$ 이상의 분말은 결정질 또는 비정질의 혼합 상으로 구성되었다. 비정질 분말 회수율은 약 60% 이상이었다. 미세 TEM 분석에서 75$\mu\textrm{m}$ 이하 분말은 전형적인 비정질 Halo 형상을 보였으며, 결정질이 혼합된 분말은 비정질 기지상에 결정질 응고 수지상 조직이 혼합되어 있음을 확인하였다.

• Journal of the Korean Geotechnical Society
• /
• v.29 no.9
• /
• pp.81-91
• /
• 2013

This paper investigates the shear properties of bottom ash-crumb rubber mixture reinforced with waste fishing net. Mixtures used in this experiment were prepared at 2 different percentages of crumb rubber (2 mm~10 mm) content (i.e., 0%, 50% by weight of the dry bottom ash). In this study several series of triaxial tests were carried out on the six different specimens : unreinforced bottom ash, reinforced bottom ash with 1 or 2 layers, unreinforced mixture, reinforced mixture with 1 or 2 layers. The experimental results indicated that the shear properties of bottom ash-crumb rubber mixture were strongly influenced by reinforcing layer of waste fishing net and crumb rubber addition. It is shown that the internal friction angle of bottom ash-crumb rubber mixture decrease with addition of crumb rubber due to the compression properties of crumb rubber. However, the internal friction angle of the mixture increased with an increase in reinforcing layer due to interlocking effect and friction between mixture and waste fishing net.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.44 no.8
• /
• pp.1157-1164
• /
• 2015

The present investigation evaluated the antioxidant activities of water extracts from dandelion (Taraxacum officinale) aerial parts, roots, and mixed extracts. Mixed extract of T. officinale was a mixture of aerial parts and roots at 9:1 and 8:2 weight ratios. Extracts from aerial parts (DAE), roots (DRE), and mixture of aerial parts and roots (DME) were measured for cell viability and catalase activity in HepG2 cells, 1,1-diphenyl-2-picrylhydrazyl (DPPH) radical scavenging activity, and lipid peroxidation inhibitory activity. Cell viabilities of HepG2 cells treated with DAE, DRE, DME 8:2, and DME 9:1 against $H_2O_2$-induced oxidative damage were 63.4%, 54.6%, 76.7% and 83.4% at a concentration of $400{\mu}g/mL$, respectively. Catalase activity was highest in DME 9:1 (12.2 mU/min/mg protein) compared with DAE (9.0 mU/min/mg protein) and DRE (9.7 mU/min/mg protein). DPPH radical scavenging activity of DME showed a significantly lower $EC_{50}$ value than DAE ($EC_{50}$ value of DME $9:1=163.3{\mu}g/mL$, DME $8:2=172.4{\mu}g/mL$, and $DAE=173.7{\mu}g/mL$). Lipid peroxidation inhibitory activity of DME showed a significantly lower $EC_{50}$ value than DAE [$EC_{50}$ values of DME $(9:1)=454.4{\mu}g/mL$, DME $(8:2)=426.6{\mu}g/mL$, and $DAE=654.7{\mu}g/mL$]. The results indicate that a small amount of T. officinale roots increased antioxidant activity of aerial parts. Especially, a 9:1 mixture was more valuable than 8:2 mixture for industry.

• Korean Journal of Materials Research
• /
• v.8 no.9
• /
• pp.849-855
• /
• 1998

The purpose of this study was performed to compare to the characteristics (microstructure, phase change and hardness, erosion rate) of HVOF sprayed coatings with 20wt% NiCr claded and 7wt%NiCr mixed $\textrm{Cr}_{3}\textrm{C}_{2}$ powder. In the case of the 20wt% NiCr claded $\textrm{Cr}_{3}\textrm{C}_{2}$ powder, microstructural feature showed that the primary $\textrm{Cr}_{3}\textrm{C}_{2}$ was remained in the coating but was barely remained in the mixed $\textrm{Cr}_{3}\textrm{C}_{2}$ coating. As a results of XRD analysis, both 20wt%NiCr claded and 7wt% NiCr mixed $\textrm{Cr}_{3}\textrm{C}_{2}$ powder was decomposed during spraying but the degree of decomposition of the 20wt%NiCr claded was lower than 7wt%NiCr mixed $\textrm{Cr}_{3}\textrm{C}_{2}$ powder. After spraying the mixed powder for microhardness was higher than claded $\textrm{Cr}_{3}\textrm{C}_{2}$ powder and which was increased up to $\textrm{Hv}_{300}$= 1665 after heat treatment to $1000^{\circ}C$. however. 20wt%NiCr claded $\textrm{Cr}_{3}\textrm{C}_{2}$ became to decrease at $600^{\circ}C$ which was the maximum.