• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.39A no.6
• /
• pp.357-364
• /
• 2014

In this paper deals with PON Remote monitoring solution using Reflecting Filter. The current FTTH-PON can not be monitored in real time that Optical cable fault and Quality degradation of Splitter. To solve this problem, Monitoring can make Feeder Network and Splitter that Reflecting filter development using the basic structure of Fiber Bragg grating. Reflecting Filter is Quality Monitoring System shall provide tools for user to view and analyze degradation of cables and splitter in particular predict any gradual component degradation(Optical cable bending, splice, connector, etc) before it becomes service impacting. The Reflecting Filter solution is splitter down and confirm the fault location of optical cable and it will send central control station can be monitored system an alarm to the OLT. In other words, wavelength side branches Mating existing communication affairs (Coupler) using the core of one optical wavelength for live monitoring two wavelengths and sends the subscriber side modem and aggregation switch device remotely using a reflective optical line filter monitoring the study of the system. this study can development of Reflecting filter improve the average processing time of Optical cable fault and efficient Maintenance of the network.

• Proceedings of the KSR Conference
• /
• 2011.10a
• /
• pp.1077-1083
• /
• 2011

Turnout is one of railroad track components. The turnout is used to change train routes to near other sections when keeping the train speed. There are many accidents in the section including the turnout. The number of accidents and errors is 363 for ten years in the section including the turnout and annual average is 36.3. To ensure safety of the turnout, it is necessary to install monitoring systems. By using the monitoring systems, it is able to accumulate related information, develop maintenance and take a step for accidents in advance. Hence, The number of accidents and errors is decreased in the section including the turnout. So, when new turnout is installed, it is needed to use monitoring systems. Therefore, combined turnout management system is needed in Korea. It is possible to perform efficient maintenance because real-time monitoring system by using sensors and data-base management system. In this paper, accidents in the section including domestic turnout are analyzed and foreign combined turnout management system is presented. Hence, articles for installing the combined turnout management system in Korea are proposed.

• Proceedings of the KSR Conference
• /
• 2011.10a
• /
• pp.1511-1516
• /
• 2011

The maintenance of the turnout is composed of signal field and track field on business, the electrical and mechanical field on system. adjustment and maintenance carry forward through coordination with these fields. In the case of turnout equipment used in a first phase of Seoul-Busan high-speed train, it is treated by classifying as mechanical adjustments and electrical adjustments. Mechanical adjustment is conducted with focus on fine adjustment to meet maintenance standards limits(1mm or less) about interval of basic rail and tongue rail about each part of track transition equipment. This refers to mechanical adjustments performed mainly with physical changes and movement characteristics between basic rail and tongue rail by considering the overall environment surrounding track side of section installed track transition equipment. However, these series of maintenance are conducted in state that high-speed train is not in the process from 1 am to 4 am at night, but common workers for maintenance are not familiar with the operation and checking about various situation, and the workers are even insufficient. Maintenance training using mixed reality is conducted in the place of business, we tried to overcome several problems of safety and time reduction through this training.

• Journal of the Korean Institute of Navigation
• /
• v.25 no.2
• /
• pp.131-136
• /
• 2001

A new analysis method of lumped-element directional coupler for CATV was proposed, where the even-and odd-mode theory for a symmetrical coupled-line directional coupler was applied to a transformer-type directional coupler. In addition, the tap-offs were analyzed by the proposed theory, which are widely used in CATV (Cable Television) systems. By comparing the calculated results for S-parameters results to the measured ones using only the even-and odd-mode reflection coefficients, the validity of the proposed analysis method was confirmed. Then, it was clearly shown that the tap-off has very wide bandwidth from 5 MHz to 4,000 MHz by adopting the proposed theory.

• Proceedings of the IEEK Conference
• /
• 2000.09a
• /
• pp.741-744
• /
• 2000

본 논문에서는 고밀도 DVD(Digital Versatile Disc) 시스템(4.7GB～l5GB)을 위한 신호 검출기법을 제안하고 FPGA로 구현한다. 본 논문에서 제안하는 FDTrS/DF (Fixed Delay Trellis Search with Decision Feedback)는 트렐리스 구조를 사용하므로 FDTS/DF나 SSD/DF(Signal Space Detection with Decision Feedback)와 같이 이진 가지 구조를 사용하는 신호검출방식에 비해 더 나은 성능을 얻을 수 있다. 또한 FDTrS/DF는 한 단의 트렐리스 구조를 사용해 역추적을 하지 않으므로 하드웨어의 복잡도와 속도면에서 향상된 결과를 얻을 수 있다. 또한 본 논문에서는 하드웨어 구현 시 동작 속도의 향상을 위해 파이프라인 기법과, 계산량 감소를 위해 절대값 분기거리를 사용한다.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.10 no.8
• /
• pp.875-882
• /
• 2015

Recently, An introduction of communication based train control system both into greenfield and brownfield of urban transit network has been actively reviewed. However, since a number of line sections and rolling stock depots tends to be constructed based on track circuit for various reasons, necessity of inter-operation between two distinct train control system (CBTC, ATC) increases. Therefore, we propose a design of on-board signalling device that allows inter-operation of CBTC and ATC lines and a method to secure safe connection between these two lines without derailing point machine.

• Proceedings of the Korean Information Science Society Conference
• /
• 2005.11b
• /
• pp.463-465
• /
• 2005

내장형 시스템의 요구사항이 복잡해짐에 따라 신뢰성이 높은 소프트웨어 생산이 어려워지고 있다. 본 논문은 신뢰성 높은 내장형 시스템의 소프트웨어를 생산을 위해 교차 컴파일 환경에서 사용 가능한 소프트웨어 테스팅 도구를 제안한다. 일반적으로 테스팅 도구는 독자적인 테스트 스크립트를 사용한다. 그러므로 테스팅을 하고자하는 개발자는 테스팅 도구에서 사용하는 테스트 스크립트를 학습하여야한다. 즉, 개발자가 기존의 테스트 도구를 사용하기 위해서는 새로운 스크립트 언어를 학습해야 하는 부담을 가지고 있다. 본 논문에서 제안하는 시스템은 이러한 단점을 극복하기 위해서 개발자에게 친숙한 XML을 이용하여 테스트 스크립트를 설계한다. XML은 마크 업 언어의 표준으로 다양한 응용을 가지고 있고 다른 형태의 포맷으로 쉽게 변환 가능하다는 장점을 가지고 있다. 또한, GUI 기반의 테스트 스크립트 생성기를 제공하여 개발자에게 직관적인 테스트 스크립트 작성을 할 수 있도록 제안한다. 그리고 기존의 테스트 스크립트와 달리 테스트 스크립트 언어 레벨에서의 테스트 분기를 제공하고 있어 테스트 결과에 따른 다양한 테스트를 실시할 수 있다. 본 테스팅 도구는 개발자에게 테스트 드라이버 작성을 위한 노력을 줄여 더욱 질 좋은 프로그램을 생성하는데 기여할 것으로 기대된다.

• Korean Journal of Optics and Photonics
• /
• v.34 no.4
• /
• pp.151-156
• /
• 2023

We propose to implement cost-effectively a high-speed short-haul interconnect by transmitting a 200-Gb/s/λ two-channel optical time-division-multiplexed signal generated by a carrier-suppressed optical pulse, which improves the robustness of the multiplexed signal to chromatic dispersion. The multiplexed 200-Gb/s signal is generated in the transmitter by combining two 100-Gb/s 4-level pulse-amplitude-modulated signals (generated using the optical pulse and two Mach-Zehnder modulators). After the signal is transmitted over a fiber, it is amplified by a semiconductor optical amplifier and detected by a photodiode. The amplified spontaneous emission noise is eliminated by an optical band-pass filter. The transmitted signal is reconstructed by a 2 × 2 multiple-input multiple-output equalizer, which compensates for crosstalk. Due to the use of the carrier-suppressed optical pulse, the 200-Gb/s signal can be transmitted over fiber with a chromatic dispersion of 40 ps/nm.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.9 no.1 s.24
• /
• pp.89-98
• /
• 2006

This paper describes signal attenuation characteristics as splicing the output on LVDT for stability and reliability of switching mechanism, which is developed to use common signal between FLCC and EDFLCC, on T-50 aircraft. The method of test is classified a Pspice simulation and an actual hardware evaluation. The difference of error margin for two methods is 10times, the latter higher. The result in this experiment shows that the signal attenuation as splicing the output on LVDT doesn't affect and the static error margin is 53% for develope the EDFLCC.

• 한국정보통신설비학회:학술대회논문집
• /
• 2005.08a
• /
• pp.53-55
• /
• 2005

일반주택지역을 위한 초고속인터넷 제공방안은 xDSL과 HFC 기술방식이 적용되어 왔다. HFC는 전송속도의 기술적 한계를 가지며, xDSL은 기존 동선을 활용하는 솔루션으로 경제적인 장점을 가지지만 동선 선로품질에 따라 품질저하가 발생한다. 이에 UTP케이블이 기포설된 1등급 아파트에만 공급 가능하였던 100Mbit/s 패스트이더넷을 일반주택지역에 공급하기 위한 유사FTTH 시스템이 개발되어 현장에 운용 중이다. 광코어 절감 및 운용유지 측면을 고려하여 WDM-PON (Wavelength Division Multiplexing-Passive Optical Network, 파장분기 수동형광가입자망) 방식을 채택하였으며, 가입자 인근 전주까지 광케이블이 포설되어 ONU(Optical Network Unit)가 설치되며, ONU로부터 가입자 댁내 단말까지 가공형 UTP케이블을 통해 패스트이더넷을 공급하는 방식이다.