• The Journal of Information Technology
• /
• v.7 no.3
• /
• pp.1-10
• /
• 2004

Considerable efforts has been recently devoted to the determination of accurate channel models for the Power Line environment, both for the indoor and outdoor cases. The common denominator and limitation of the known and previously published models is the particular type of approach followed. In this paper is concerned with a power line channel modeling for the more fast and efficiently power line communication experiment. A capacitor load channel simulator is a essential equipment in the power line modem development for indoor network. We accomplished a channel modelling by the frequency response method about the total 224 capacitor load cases. On the basis of this measurement modeling it is here revealed that the PLC is a more deterministic media that commonly believed.

• Journal of Korean Society of Transportation
• /
• v.29 no.2
• /
• pp.37-45
• /
• 2011

The main objective of this study is two-fold: 1) to analyze the effect of PG technology application on road user's satisfaction and driving speed, and 2) to investigate the relationship between driver's subjective workload level and their reactions related to the PG technology application. Based on the result of field observation, the experimental scenario for driving simulation study was prepared. The experimental results showed that drivers were more satisfied to the road condition with PG technology applied, and even the pattern of speed reduction was more stable than control condition. The pattern of speed reduction along driver's subjective driving workload level were slightly different by physical road condition, and road user's satisfaction was revealed to be negatively correlated with their subjective driving workload level. This result indicates that depending on situation and driver characteristic, information for the drivers could be nothing more than nuisance that just distracts drivers. In order to facilitate the implementation of PG technology in Korea, further study on related human factors, especially for those who are weak in traffic situations, is recommended.

• International Journal of Highway Engineering
• /
• v.13 no.1
• /
• pp.149-156
• /
• 2011

Considerable evaluation is needed to design a new longitudinal tunnel in advance because it damaged drivers' driving safety and heightened the possibility of traffic accidents with its physical characteristics. Specifically, considering traffic psychological and ergonomic factors was very important to prevent the difficulty of maintaining safe speed, the increase of the drowsy driving, the fatality of traffic accidents, and subjective feelings such as anxiety while driving a car through the tunnel, from design to construction. This study dealt with driving safety evaluation of an original road alignment design for the longitudinal tunnel (length: above 10km) with a driving simulator, and helped us to improve an original road alignment design and make an alternative road alignment design with presenting risky districts. The results of experiment showed that inflection points were revealed more risky districts, because they impaired driving safety and elevated driver workload while driving a car through around the inflection points of two-way route. Finally, the limitations and implications of this study were discussed.

• International Journal of Highway Engineering
• /
• v.10 no.4
• /
• pp.127-138
• /
• 2008

Vehicles have recently become one of the main factors affecting our quality of life, and the needs of vehicles are still increasing. As a result, the growth of vehicles generate more crashes every year. One main factor for vehicle crashes is uncareful driving behaviors. Especially, drowsy or fatigue driving behaviors explain about 10-20% of the crashes, and they cause serious results because of the delay of response time and the decrease of object-recognition. Therefore, this research conducted real time image processing tests in order to study how cellular phone usages and drowy(or fatigue) drives affect driving behaviors. A vehicle simulator was used for this research, and the faceLAB 4.5 of Seeing Machines for eye image tracking tests using a small camera was installed in the front of the simulator, and normal and drowsy(or fatigue) driving patterns were analyzed.

• Proceedings of the KIEE Conference
• /
• 2007.10a
• /
• pp.347-348
• /
• 2007

전력산업에 당초 도입 예정되었던 도매경쟁시장을 운영지원하기 위하여 전력거래소는 지난 2002년 도매경쟁 전력시장 운영시스템(Two Way Bidding Pool Market Operation System; TWBP MOS, 이하 전력시장운영시스템)을 구축하였다. 그러나 이후 배전분할 잠정 중단정책에 따라 구축 완료된 시스템은 실 업무에 적용해보지도 못한 채 폐기될 수도 있는 상황이 발생하였다. 하지만 전력거래소는 배전분할 잠정 중단에 따른 발전 경쟁시장(CBP; Cost-Based Pool) 장기화에 대비, 운영상의 효율성을 개선하고 기 개발된 전력시장운영시스템을 활용하여 급전체계를 개선하는데 성공하였다. 실시간 급전 운영을 위해 기존 EMS에 전력시장운영시스템을 연계하여 전력시장운영시스템의 5분 단위 수요 예측량을 기반으로 송전망 제약과 예비력 요구량 등을 고려한 발전기별 경제부하 배분량 및 예비력 배분량을 결정하고, 추가적으로 EMS에서 수요예측 오차 및 주파수 보정량을 실시간으로 계산하여 발전기별로 배분하도록 함으로써, 1일 전 시행하던 급전계획을 취득 자료를 기반으로 5분 단위로 실시간 계산할 수 있도록 급전 개선하였다. 이를 통해 실시간으로 에너지와 예비력을 동시에 최적화함으로써 전력시장 및 전력계통 운영을 한층 선진화 할 수 있는 계기를 마련하였으며 또한 저비용 발전기 사용을 극대화함으로 발전비용의 절감에도 기여하는 효과를 가져왔다. 이러한 긍정적인 효과에도 불구하고, 전력시장윤영 시스템은 구축된 모든 설비 및 프로그램을 당초 목적에 맞게 활용하지 못한다는 이유 등으로 시스템의 최적화 및 성능 개선에 대한 투자가 망설여지는 현실이다. 특히 온라인 실시간 시스템과 별도로 전력시장운영을 모의 할 수 있는 시뮬레이터가 구축되지 않아 시장의 흐름을 사전 예측하거나 시스템 오류 등을 재현하여 재발 대책 등을 마련하기가 매우 어려운 실정이다. 이에 본 논문에서는 그동안 쌓아온 전력거래소의 전력시장운영시스템 운영관리에 대한 다양한 경험을 바탕으로 구축비용을 획기적으로 절감할 수 있는 전력시장운영시스템 시뮬레이터의 구축방안을 제시하고자 한다.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2016.10a
• /
• pp.219-220
• /
• 2016

A power management system (PMS) has been an important part in a ship integrated control system. To evaluate a PMS for a liquefied natural gas carrier (LNGC), this research proposes a real-time hardware-in-the-loop simulation (HILS), which is composed of major component models such as turbine generator, diesel generator, governor, circuit breaker, and 3-phase loads on MATLAB/Simulink. In addition, FPGA based control console and main switchboard (MSBD) are constructed in order to develop an efficient control and a similar real environment in an LNGC PMS. A comparative study on the performance evaluation of PMS functions is conducted using two test cases for sharing electric power to consumers in an LNGC. The result shows that the proposed system has a high verification capability for the operating function and failure insertion evaluation as a PMS simulator.

• Journal of Advanced Navigation Technology
• /
• v.23 no.1
• /
• pp.1-7
• /
• 2019

Thisstudy presentsthe development of a fast-time airport surface simulator. The simulator usesthe output from a first-come first-served (FCFS) scheduler and has adopted one-dimensional dynamic model to simulate the movement of the aircraft on the surface. Higher collision risks situations in the airport surface traffic are analyzed to classify those situations into six cases. A conflict detection and resolution algorithm is implemented to maintain separation distance and to prevent deadlock. The simulator was tested with a scenario at the Incheon International Airport that contains 72 aircraft. Without the conflict detection and resolution, various conflict situations are identified. When the conflict detection and resolution algorithm is managing the traffic, it is confirmed that the conflicts are removed at the price of additional delays. In the conflict resolution algorithm, three prioritization strategies are implemented, and delayed aircraft count and average additional delays are compared. Prioritization based on remaining time or distance showed smaller total additional delay compared to choosing minimum delay priority for each situation.

• Journal of Navigation and Port Research
• /
• v.48 no.1
• /
• pp.1-6
• /
• 2024

Aid-to-Navigation facility is important for maritime traffic safety. In Korea, for safe maritime traffic, the Ministry of Oceans and Fisheries is using an Aid-to-Navigation management system. The current Aid-to-Navigation management system displays information based on text, making it difficult to determine the impact if Aid-to-Navigation fails or an accident occurs. A simulator can be used to verify the placement of Aid-to-Navigation. However, real-time information is not applied and maintenance of the simulator is expensive. Additionally, the Aid-to-Navigation simulator cannot simulate effects of port backlighting. To improve these issues, we proposed an Aid-to-Navigation management platform based on digital twin technology. This system can predict failures by analyzing real-time sensor data collected from navigation signs. We plan to develop a function that can simulate Aid-to-Navigation placement. Aid-to-Navigation is expected to be managed efficiently by applying digital twin technology.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.17 no.2
• /
• pp.26-33
• /
• 2009

New equipment that is useful for driving is developing every day. Navigation is one of the most popular equipment among them. Telematics market including navigation is getting bigger and bigger. However, traffic accident from using telematics equipment is also increasing. Drivers may lose glance using navigation, and driver's workload will also grow by driver's distraction. This thesis is base on the study about the influence on the drivers' workload by using the telematics equipment. Previous study of drivers' workload used psychological method and behavior test method, but it was less connection with telematics equipment. The main object of this thesis is measuring the workload according to the telematics usage by HMI (Human Machine Interface) in the virtual reality. Therefore, we developed GPS simulator, and made an experiment of whether using the navigation or not on the highway and an experiment of the location of navigation in downtown. The result of these experiments is that workload when driver used navigation was higher than when driver didn't use navigation. In addition, workload was different according to the location, and HUD (Head-Up Display) was especially higher than other locations but also its information delivery ability was the best.

• Proceedings of the KSR Conference
• /
• 2007.05a
• /
• pp.1807-1813
• /
• 2007

The study aims at analyzing an underground station refuge model using EXODUS, one of the refuge simulation programs. The model for simulation is the Daegu Subway (Joongang-ro station). The details of the accident are referred to as the simulation condition the refuge time of traveling from the $3^{rd}$ basement platform to the $1^{st}$ basement is mainly calculated, with passengers numbering 1,000 including 329 at car 1079, 320 at car 1080, and 360 who are not on board. Reference data is used to set up the position of passengers. CFAST fire simulator is also used, and a fast curve among the $t^2$ growth curves, selected as fire growth scenario. The zone is divided into a total of 24 including 18 at the $3^{rd}$ basement platform and 6 at the $2^{nd}$ basement the $1^{st}$ basement is excluded in the fire simulation, however.