• Korean Journal of Environmental Biology
• /
• v.28 no.2
• /
• pp.86-94
• /
• 2010

This study compares and contrasts the dynamics of plankton in 31 temperate lakes and reservoirs, and considers particularly the biomass ratio of zooplankton to phytoplankton and ecological model application. A total of 89 species of zooplankton were identified (70 rotifers, 14 cladocerans and 5 copepods) and a total of 554 species of phytoplankton were identified (176 Bacillariophyceae, 237 Chlorophyceae, 68 Cyanophyceae, and 73 other algal taxa). The total plankton abundance and species diversity were showed distinctive spatial and seasonal variation. Annual average phytoplankton density was $7,350{\pm}15,592$ cells $mL^{-1}$ (n=124), and the lowest was $855{\pm}448$ cells $mL^{-1}$ (n=4), while the highest was $72,048{\pm}13,4631$ cells $mL^{-1}$ (n=4). For zooplankton, small rotifer groups dominated the study sites, and approximately 3~10 species appeared in the study sites. Statistical analysis and an ecological model application revealed that the size of reservoirs affected the structure size of plankton community, i.e. relatively large number of species were found in smaller reservoirs. From this result, we can conclude that management strategy for the reservoir environment has to be focused more on small-size reservoirs, in terms of plankton community ecology.

• Korea journal of population studies
• /
• v.10 no.2
• /
• pp.17-45
• /
• 1987

This study contributes to understanding women's labor market behavior by focusing on a particular set of labor force transitions - labor force withdrawal and entry during the period surrounding the first birth of a child. In particular, this study provides a dynamic analyses, using longitudinal data and event history analysis, to conceptualize labor force behaviors in a straightforward way. The main research question addresses which factors increase or decrease the hazard rates of leaving and entering the labor market. This study used piecewise Gompertz model, following the guide of the non-parametric analysis on the hazard rates, which allowed relatively detailed description on the distribution of timing of leave and entry to the labor market as parameters of interest. The results show that preferences and structural variables, as well as economic considerations, are very important factors to explain the labor market behavior of women in the period surrounding childbirth.

• The Journal of Society for e-Business Studies
• /
• v.16 no.3
• /
• pp.23-45
• /
• 2011

People could possess different self-identity under virtual world from physical world because of anonymity of the virtual world and this difference could influence their behavior in the virtual world. Based on self-discrepancy theory, this research proposes that continuous use model in self-expression goal. We defined the difference bet ween actual self~identity and ideal self~identity in the virtual world as "self-discrepancy in virtual world", and the difference between actual self-identity in the physical world and actual self-identity in the virtual world as "cross-world self-discrepancy". Before testing hypothesis, we compare the actual self-identity in the online community with the actual self-identity in the physical world, and with ideal self-identity in the virtual world. We derived an index for two different types of self-identity in terms of Personal Self-identity and Social Self-identity through factor analysis. Our results show that online community members have a higher level of ideal self-identity than actual self-identity in online community, and they have better personal self-identity in online community than physical world while a lower level of social self-identity in online community than physical world. The results of the hypothesis testing analysis based on 300 respondents showed that "self-discrepancy in virtual world" negatively influenced perceived usefulness for self-expression while "cross-world self-discrepancy" positively influenced perceived usefulness for self-expression. The perceived usefulness for self-expression and ease of use positively influence both continuous use and knowledge contribution. Specially, the effect of perceived usefulness for self-expression on knowledge contribution is much bigger than the effect of ease of use. This study extends self-discrepancy theory to virtual worlds by suggesting various types of self-discrepancy and by applying the effect of self-discrepancies in online community. Also, this study extends technology acceptance model in the personal goal in terms of self-expression. This study hopes to offer practical insights by suggesting positive effect of self-discrepancy on behavior in the online community.

• Tunnel and Underground Space
• /
• v.13 no.1
• /
• pp.52-63
• /
• 2003

Discontinuities such as faults, fractures and joints in rock mass play the dominant role in the mechanical and hydraulic properties of the rock mass. The key factors that influence on the flow of groundwater are hydraulic and geometric characteristics of discontinuities and their connectivity. In this study, a program that analyzes groundwater flow in the 3D discontinuity network was developed on the assumption that the discontinuity characteristics such as density, trace length, orientation and aperture have particular distribution functions. This program generates discontinuities in a three-dimensional space and analyzes their connectivity and groundwater flow. Due to the limited computing capacity In this study, REV was not exactly determined, but it was inferred to be greater than 25$\times$25$\times$25 ㎥. By calculating the extent of aperture that influences on the groundwater flow, it was found that the discontinuities with the aperture smaller than 30% of the mean aperture had little influence on the groundwater flow. In addition, there was little difference in the equivalent hydraulic conductivity for the the two cases when considering and not considering the boundary effect. It was because the groundwater flow was mostly influenced by the discontinuities with large aperture. Among the parameters considered in this study, the length, aperture, and orientation of discontinuities had the greatest influence on the equivalent hydraulic conductivity of rock mass in their order. In case of existence of a fault in rock mass, elements of the equivalent hydraulic conductivity tensor parallel to the fault fairly increased in their magnitude but those perpendicular to the fault were increased in a very small amount at the first stage and then converged.

• Korean Journal of Soil Science and Fertilizer
• /
• v.37 no.2
• /
• pp.74-82
• /
• 2004

This study was conducted to estimate the optimum application rate of fertilizer N based on $NO_3-N$ concentration in soils for tomato (Lycopersicon esculentum Mill.) cultivation in plastic film house. Tomato plants were cultivated with and without fertilizer in twelve soils which have different concentrations of $NO_3-N$ ranging from 46 to $344mg\;kg^{-1}$. Dry weight (DW) of above-ground part of tomato with no fertilizer ranged from 28.9 to $112.5g\;plant^{-1}$, depending on N-supplying capability of soils. The soil $NO_3-N$ was positively correlated with DW ($r=0.83^{**}$) and N uptake ($r=0.78^{**}$) by tomatoes in no fertilizer treatment, and negatively correlated with fertilizer effciencies resulted from the differences of DW and N uptake between fertilized and non-fertilized plot. The relationships between soil $NO_3-N$ concentration and DW, N uptake, and fertilizer efficiency were analyzed to determine the critical levels of soil $NO_3-N$ for tomato cultivation. The limit critical levels of soil $NO_3-N$ were estimated to be more than $280mg\;kg^{-1}$ for no application of fertilizer N and to be less than $50mg\;kg^{-1}$ for recommended application of fertilizer N. These critical levels of soil $NO_3-N$ were nearly the same as those calculated from regression equation between electrical conductivity(EC) and soil nitrate for critical levels of EC in recommendation equation of fertilizer N for tomato under the plastic film house by NationaI Institute of Agricultural Science and Technology. Consequently, the optimal application rate of ferdilizer N for tomato cultivation in the soils containing $NO_3-N$ concentration between $280mg\;kg^{-1}$ and $50mg\;kg^{-1}$ was estimated by the equation Y = -0.4348X＋121.74, where Y is the percent(%) to the recommended application rate of N fertilizer and X is the soil $NO_3-N$ concentration ($mg\;kg^{-1}$).

• Journal of Korean Society of Transportation
• /
• v.23 no.7 s.85
• /
• pp.159-163
• /
• 2005

The propriety between suppliers and demanders in geometric design is very important. Although the final purpose of constructing roads is to concern about the driver s comfort, unfortunately, it has not been considered so far. We've considered the regularity and quickness in considering driver's comfort but there should be considered the safety for the accident as well. If drivers are appeared to be more speeding than designer's intention, there will be needed some supplements to increase the safety rate for the roads. Even if both an upward and downward section are supposed to exist at the same time for solid geometry of the roads like this, it is true that the recent design for the 3-D solid geometry section has been done as flat 2-D and the minimum plane curve radius and the maximum cant have been decided just by calculating without considering operating speed between an upward and downward section at the same point. In this investigation, thus, I'd like to calculate the safety of the cant by considering the speed features of the solid geometry for the first lane of four lane rural roads. To begin with, we investigated the driving speed of the car, which is not been influenced by a preceding car to analyze the influence of the geometrical structure by using Nc-97. Secondly, we statistically analyzed the driving features of the solid geometry after comparing the 6 sections, that is, measuring the driving speed feature at 12 points and combining the influence of the vertical geometry and plane geometry to the driving speed of the plane curve which was researched before. Finally, we estimated the value of cant which considers the driving speed not by using it which has applied uniformly without considering it properly, though there were some differences between a designed speed and driving speed through the result of the basic statistical analysis but by introducing the new safety rate rule, a notion of ${\alpha}$. As a result of the research, we could see the driving features of the car and suggest the safety rate which considers these. For considering the maximum cant, if we apply the safety rate, the result of this experiment, which considers 3-D solid geometry, there'll be the improvement of the driver's safety for designing roads. In addition, after collecting and analyzing the data for the road sections which have various geometrical structures by expanding this experiment it is considered that there should be developed the models which considers 3-D solid geometry.

• Journal of Distribution Science
• /
• v.10 no.2
• /
• pp.19-28
• /
• 2012

Rapidly growing sales amount and the number of discount stores caused many side effects and sensitive issues in Korea. Because these severe competition due to more expensive cost just like excessive increase in advertising and location selection, and these caused completely ruined small merchants as well as passed on to the consumer. This Study focused on competitiveness of discount store in Korea to the perspective of college students, as explored the relationships between marketing communication and store loyalty. And, examined for two moderating effect, 1) consumers' value separated by hedonic value and utilitarian value between marketing communication and store loyalty, and 2) consumers' value separated by hedonic value and utilitarian value between marketing communication and consumption emotion. Finally, this study examined for mediating effect of consumption emotion between marketing communication and store loyalty. In order to verify the relationship, moderating and mediating effects, data were collected from 130 college students in Whasung, Gyeonggi Province to test theoretical model and its hypotheses. Findings are as followed : First, analysis showed that factors such as advertisement(β =.221, p<.05), publicity(β =.513, p<.01), sales promotion(β =.234, p<.01), word of mouth(β =.627, p<.01) and physical environment(β =.339, p<.01) for marketing communication in the discount store have statistically significant positive effect on store loyalty. But the result of regression analysis for which factors are more impact in marketing communication between store loyalty showed that word of mouth(β =.53, p<.01) is only statistically significant. Second, publicity(β =-.895, p<.05), the sub-dimension of marketing communication shows only statistically significant negative moderating effect on store loyalty. But, the results of the moderating effect of value between marketing communication and consumption emotion verified that utilitarian value show statistically significant, specifically advertisement(β =.294, p<.01), physical environment(β =.418, p<.01), sales promotion(β =.245, p<.01), word of mouth(β =.414, p<.01) and publicity(β =1.137, p<.05), respectively. And hedonic value show statistically significant, specifically advertisement(β =.286, p<.01), physical environment (β =.418, p<.01), sales promotion(β =.236, p<.01) and word of mouth(β =.420, p<.01), respectively. But publicity(β =.145, p=.119) is not statistically significant. Finally, the results verified mediating effect for consumption emotion between all factors for marketing communication and store loyalty showed that factors such as advertisement, publicity, word of mouth and physical environment for marketing communication except sales promotion were statistically significant fully mediated in advertisement, and partially mediated in publicity, word of mouth and physical environment. This testified that the consumption emotion had the most important factor to enhance store loyalty to the perspective of College students. These results can provide important implications and invaluable tips for planning marketing strategies and gaining access to new potential customers. Implications and future research directions are also discussed.

• Journal of Korean Society of Environmental Engineers
• /
• v.36 no.12
• /
• pp.803-812
• /
• 2014

This study assesses the strategy and performance of Eco-industrial Park (EIP) initiative implemented by Korea Industrial Complex Corporation (KICOX) with the support of Ministry of Trade, Industry and Energy (MOTIE), Korea since 2005 to 2013 and recommends future directions. After the concept of EIP based on industrial symbiosis (IS) is introduced, the background and implementation procedure of the EIP initiative are described. Then, economic and environmental achievement was assessed. During the project periods (2005-2013), 449 industrial symbiosis project were explored, among which 296 projects have been implemented. Among (Of these 296 projects,) them, 244 projects have been completed in which 118 projects have been commercialized which shows 48% commercialization rate of the completed projects. Through these commercialized projects, around 311.1 billion won/year of economic benefits and reduction of waste by-products of 828,113 tons/year, wastewater of 215,517 tons/year, reduction in energy consumption of 250,475 toe/year and GHG emission reduction of 1,107,189 $tCO_2/year$ were achieved. This results confirmed that EIP initiative based on industrial symbiosis can enhance eco-efficiency of industrial parks and harmonize economy and environment. However, there are obstacles like absence of interagency coordination and cooperation, laws and institutional barriers, increased demand for local governments, funding for project investment. Thus, to utilize EIP initiative as a strategic tool for competiveness and environmental management of industrial parks, it needs intergovernmental collaboration and interdisciplinary approach to lower barrier in implementation.

• Korean Security Journal
• /
• no.44
• /
• pp.7-35
• /
• 2015

The objective of this article is to inform and document the contemporary development of the private security industry in Queensland Australia, a premier holiday destination that provide entertainment for the larger region. The purpose of this review is to examine the comtemporary development of mandated licensing regimes regulating the industry, and the necessary reform agenda. The overall aim is threefold: first, to chart the main outcomes of the two-wave of reforms since the mid-'90s; second, to examine the effectiveness of changes in modes of regulation; and third, to identify the criteria that can be considered a best practice based on Button(2012) and Prenzler and Sarre's(2014) criteria. The survey of the Queensland regulatory regime has demonstrated that, despite the federal-guided reforms, there remain key areas where further initiatives remain pending, markedly case-by-case utilisation of more proactive strategies such as on-site alcohol/drug testing, psychological evaluations, and checks on close associates; lack of binding training arrangement for technical services providers; and targeted auditing of licensed premises and the vicinity of venues by the Office of Fair Trading, a licensing authority. The study has highlighted the need for more determined responses and active engagements in these priority areas. This study of the development of the licensing regimes in Queensland Australia provides useful insights for other jurisdictions including South Korea on how to better manage licensing system, including the measures required to assure an adequate level of professional competence in the industry. It should be noted that implementing a consistency in delivery mode and assessment in training was the strategic imperative for the Australian authority to intervene in the industry as part of stimulating police-private partnerships. Of particular note, competency elements have conventionally been given a low priority in South Korea, as exemplified through the lack of government-sponsored certificate; this is an area South Korean policymakers must assume an active role in implementing accredited scheme, via consulting transnational templates, including Australian qualifications framework.

• Culinary science and hospitality research
• /
• v.22 no.7
• /
• pp.267-280
• /
• 2016

Customer Experience Management (CEM) appeared as a complementary solution to overcome CRM limitations. CEM enhances profitability through building long-term relations with customers by understanding their experiences. This study aims at investigating the impact of customer experience quality on the willingness to pay more through customer satisfaction in the hotel businesses. The survey for this study was carried out on customers who had domestic hotel experience s within the last 6 months. Out of the 306 questionnaires retrieved, 225 valid responses were used for the empirical analysis that utilizied the statistical package programs SPSS 18.0 and AMOS 18.0. The research findings may be summarized as follows. First, as an outcome of the research hypothesis that each component of customer experience management would influence satisfaction, 'the peace of mind' & 'the moment of truth' were shown to have a significantly positive (+) impact on it. On the other hand, 'the product experience' was shown not to significantly influence it in a positive (+) way. Second, as an outcome of the research hypothesis that satisfaction would influence willingness to pay more. From the findings of the study, theoretical implications are as follows. It can be predicted that customer experience management will likely make customers more profitable because customers are willing to pay more with a sense of loyalty built through satisfaction of the hotel industry. In the practical implications, the dimension of experience quality examined by the study can be used as an index to measure and manage customer experience in the hotel industry.