• Journal of the Korean Society for Railway
• /
• v.12 no.5
• /
• pp.811-818
• /
• 2009

An estimation method of the fallout volume of a tunnel under construction is proposed based on an empirical method called bulking factor. For this, the main causes of the tunnel fallout are investigated and the scale of the fallout which is not accessible is considered. The calculated height of the fallout area is compared with borehole core data and the accuracy and efficiency of the proposed method is demonstrated. Another experimental approach on the detection of a progressive cracking around the tunnel fallout is provided based on an acoustic emission method. From the field tests near the tunnel fallout, it is shown that additional progressive cracking of the reinforced area is not foreseen and the effectiveness of the reinforcement is proven.

• Journal of Korea Water Resources Association
• /
• v.50 no.9
• /
• pp.637-646
• /
• 2017

This study presents a numerical model for simulating dense interflows. The governing equations are provided and the finite difference method is used with the $k-{\varepsilon}$ turbulence model. The model is used to simulate a dense interflow established in a deep ambient water, resulting velocity and excess density profiles. It is observed that velocity decreases in the longitudinal direction due to water entrainment in the vicinity of the outlet and rarely changes for increased Richardson number. Similarity collapses of velocity and excess density are obtained, but those of turbulent kinetic energy and dissipation rate are not. A shape factor for the dense interflow is obtained from the simulated profiles. The value of this shape factor can be used in the layer-averaged modeling of dense interflows. In addition, a buoyancy-related parameter ($c_{3{\varepsilon}}$) for the $k-{\varepsilon}$ model and the volume expansion coefficient (${\beta}_0$) are obtained from the simulated results.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2008.11a
• /
• pp.201-204
• /
• 2008

The proposed method, capable of predicting various stress-strain responses in axially loaded concrete confined with FRP (Fiber Reinforced Polymers) composites in a rational manner, is based on the fact that the volumetric expansion due to progressive microcracking in mechanically loaded concrete is an important measure of the extent of damage in the material microstructure. The elastic modulus expressed as a function of area strain and concrete porosity, the energy-balance equation relating the dilating concrete to the confining device interactively, the varying confining pressure, and an incremental calculation algorithm are included in the solution procedure. This procedure enables the evaluation of lateral strains consecutively according to the related mechanical model and the energy-balance equation, rather than using an empirically derived equation for Poisson's ratio or dilation rate as in other analytical methods.

• Journal of the Korea Concrete Institute
• /
• v.19 no.6
• /
• pp.803-810
• /
• 2007

An analytical method capable of predicting various stress-strain responses in axially loaded concrete confined with FRP (fiber reinforced polymers) composites in a rational manner is presented. Its underlying idea is that the volumetric expansion due to progressive microcracking in mechanically loaded concrete is an important measure of the extent of damage in the material microstructure, and can be utilized to estimate the load-carrying capacity of concrete by considering the corresponding accumulated damage. Following from this, an elastic modulus expressed as a function of area strain and concrete porosity, the energy-balance equation relating the dilating concrete to the confining device interactively, the varying confining pressure, and an incremental calculation algorithm are included in the solution procedure. The proposed method enables the evaluation of lateral strains consecutively according to the related mechanical model and the energy-balance equation, rather than using an empirically derived equation for Poisson's ratio or dilation rate as in other analytical methods. Several existing analytical methods that can predict the overall response were also examined and discussed, particularly focusing on the way of considering the volumetric expansion. The results predicted by the proposed and Samaan's bilinear equation models correlated with observed results with a reasonable degree, however it can be judged that the latter is not capable of predicting the response of lateral strains correctly due to incorporating the initial Poisson's ratio and the final converged dilation rate only. Further, the proposed method seems to have greater benefits in other applications by the use of the fundamental principles of mechanics.

• Journal of the Microelectronics and Packaging Society
• /
• v.4 no.2
• /
• pp.33-40
• /
• 1997

본 연구에서는 에폭시 기지에 충진재료 SiC 분말과 SiC 휘스커 AIN분말을 사용하 여 이들 충진재의 함량 및 형상이 복합재료의 열전도도 열팽창계수 및 유전상수에 미치는 영향을 조사하였다. 복합재료의 열전도도는 세라믹 충진재의부피분율이 증가함에 따라 비선 형적으로 증가하였으며 휘스커 형상의 충진재를 첨가한 복합재료의 열전도도는 구형 분말의 충진재를 사용한 복합재료에 비해 높게 관찰 되었다. 이러한 현상은 충진재로 사용한 휘스 커가 구형 분말 충진재에 비하여 동일 부피분율에서 상호 접촉할수 있는 확률이 높기 때문 인 것으로 추정된다. 열팽창 계수는 충진제의 부피분율이 증가함에 따라 감소 하는 경향을 보였으며 충진재의 형상이 휘스커 형상인 경우가 구형에 비하여 감소되는 정도가 크게 관찰 되었다.

• Composites Research
• /
• v.16 no.1
• /
• pp.1-12
• /
• 2003

This study developed SiC$_{p}$/A1$_2$O$_3$$_{f}$/Al composites for electronic packaging to which reinforcements were added with the volume fractions of 49%, 56% and 63% by the squeeze casting method. 0.8 wt. % of the inorganic binder as well as the A1$_2$O$_3$ fiber and SiC Particles with the volume fraction of 1:10 were added to the composites, which were produced in the newly designed mold. For the produced SiC/Al composites, the CTEs (coefficients of thermal expansion) were measured from 30 to 300 and compared with the FEM numerical simulation to analyze the temperature dependent properties. The experiment showed the CTEs of SiC$_{p}$/A1$_2$O$_3$$_{f}$/Al composites that were intermediate values of those of Rule of Mixture and Turner's Model. The CTEs were close to Turner's Model in the room temperature and approached the Rule of Mixture as the temperature increases. These properties analyzed from the difference of the average stress acting between the matrix and the reinforcements proposed in this study.

• Restorative Dentistry and Endodontics
• /
• v.31 no.5
• /
• pp.344-351
• /
• 2006

The purpose of this study was to evaluate the thermal expansion characteristics of injectable ther-moplasticized gutta-perchas and a Resilon. The materials investigated are Obtura gutta-percha, Diadent gutta-percha, E&Q Gutta-percha Bar and Epiphany (Resilon). The temperature at the heating chamber orifice of an Obtura II syringe and the extruded gutta-percha from the tip of both 23- and 20-gauge needle was determined using a Digital thermometer. A cylindrical ceramic mold was fabricated for thermal expansion test, which was 27 mm long, with an internal bore diameter of 3 mm and an outer diameter of 10 mm. The mold was filled with each experimental material and barrel ends were closed with two ceramic plunger. The samples in ceramic molds were heated in a dilatometer over the temperature range from $25^{\circ}C$ to $75^{\circ}C$. From the change of specimen length as a function of temperature, the coefficients of thermal expansion were deter-mined. There was no statistical difference between four materials in the thermal expansion in the range from $35^{\circ}C$ to $55^{\circ}C$ (p > 0.05). However, Obtura Gutta-percha showed smaller thermal expansion than Diadent and Metadent ones from $35^{\circ}C$ to $75^{\circ}C$ (p < 0.05). The thermal expansion of Epiphany was similar to those of the other gutta-percha groups.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.15 no.8
• /
• pp.4763-4768
• /
• 2014

Recently, aluminum pipes have been used instead of steel pipes for open and shut machines in vinyl housing because of its corrosion-resistance and light weight. In particular, the light weight is very useful for fitting and removal by human resources. On the other hand, an aluminum pipe is weak in winter because aluminum has a larger thermal expansion coefficient than steel. This study examined the freezing and bursting of aluminum pipes by numerical analysis. The mechanical-thermal deformation characteristics were analyzed under the condition of ice volumetric expansion in aluminum pipes reaching 50%. From numerical analysis, large stresses above the yield stress occurred in aluminum pipe after ice expanded in the net diameter immediately. In addition, the freezing and bursting of aluminum pipes was predicted around an ice volumetric expansion of 6 - 7% because the thickness of the aluminum pipe reached an aluminum elongation ratio of 17%. Therefore, it is recommended that aluminum pipes be sealed perfectly to prevent water flow in the pipe. These results suggest that it is very difficult to prevent freezing and bursting of aluminum pipes by water freezing in the pipe.

• Journal of Conservation Science
• /
• v.27 no.4
• /
• pp.431-440
• /
• 2011

The thermal expansion coefficient of epoxy/inorganic additives composites was controlled by changing the amount of the inorganic additives such as talc and fused silica. The epoxy resin comprises hydrogenated bisphenol A (HBA)-based epoxide, difunctional polyglycidyl epoxide (DPE) as a diluent and isophorone-diamine (IPDA) as a crosslinking agent, which was subsequently mixed with inorganic additives (talc and fused silica). The thermal expansion coefficient was decreased by increasing amount of inorganic additives, nearly to fresh granite. Fused silica was more effective than talc in lowering the thermal expansion coefficient. Additionally, lexural and tensile strengths of the composites were getting lower and higher with the amount of the inorganic fillers, respectively. It was thus concluded that an epoxy composite containing inorganic fillers was developed to show much lower thermal expansion coefficient, similar to fresh granite, than the neat epoxy resin, and also proper mechanical strengths for applications.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.30 no.1
• /
• pp.27-32
• /
• 2020

The main cystal phases of traditional ceramics made of clay, quartz, and feldspar are mullite and cristobalite. Although mullite can provide strength to the ceramic body, it cannot be used for the heat resistant ceramics because the thermal expansion coefficient of it is relatively high as 5.3 × 10^-6/℃. In this study, development of lightweight heat resistant ceramics was tried by producing cordierite phase, of which the thermal expansion coefficient is 2.6 × 10^-6/℃, instead of forming mullite phase in the ceramic body by using Sanchung Kaolin and Jangsu gobdol sludge. It was concluded that ceramics having good heat resistant, bending strength, and refractoriness under load could be fabricated when 80 wt% of Sanchung Kaolin and 20 wt% of Jangsu gobdol sludge were used as raw materials. Also, the bulk specific gravity is 1.78, which is lighter than the existing Buncheong ware.