• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2007.04a
• /
• pp.208-211
• /
• 2007

Separation Devices have two functions. These two functions are to bond and to separate two bodies. This paper is about separation devices which use explosives to separate their bodies. Explosive bolt is separated with two bodies when the explosives in the body detonated. The good things of explosive bolt are that it has simple operational system and it is made of few parts. But it has side effects; fragment and pyre-shock. To avoid these side effects gas expansion separation(GES) bolt and pressure cartridge actuation separation(PAS) devices are invented. These use pressure to separate their bodies. The pressure is generated when explosives are burned. But the sizes of PAS devices are bigger than explosive bolts. And GES bolt has a mechanically lower bonding ability than that of explosive bolt. When you design separation devices, it is recommended to know operational system and characteristics of separation devices, to design best one.

• Journal of the Korean Society for Precision Engineering
• /
• v.20 no.9
• /
• pp.188-196
• /
• 2003

In order to increase competitiveness and to gain economic benefit, companies ask more and more how to recycle their products in a efficient way. So far, to answer this question, companies are not sufficiently supported by suitable methods specially in the area of disassembly process planning. For this reason, we develop in collaboration with an industrial partner a new method for generating an optimal disassembly sequence. In the presented paper this method will be described in detail by considering the exiting assembly information, disassembly method and disassembly depth. PLM (Profit-Loss Margin) curve that is used to determine disassembly depth consists of profit value, disassembly cost and disassembly effect. Using assessment parameters, generated alternative disassembly sequences are evaluated and optimal disassembly sequence is proposed. This method is applied to generate the optimal disassembly sequence of Door Trim as an example.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2014.11a
• /
• pp.32-33
• /
• 2014

수소자동차용 연료전지의 중요 핵심부품 중 하나인 금속분리판의 경우 표면 처리 및 코팅기법을 이용해 전기적 고전도 특성과 화학적 내부식 특성을 확보하는 것이 관건이다. 본 연구내용은 향후 상용화를 목적으로 지금까지 진행해 온 금속분리판을 위한 건식 진공 표면처리 및 코팅기술 개발 현황에 대한 것이다. 생산비용의 저가화와 대량생산 가능성을 고려하여 고속의 연속 전처리법 및 진공증착법을 기본 공정으로 선정하고, 고전도/내부식성 증착물질 선택에도 귀금속을 배제하는 등의 기본 전제와 연구 결과를 소개한다. 기 확보된 기술에 의한 접촉저항 및 내부식 특성은 미국 DOE의 2017년 목표치를 만족하는 결과를 보였다.

• International Area Studies Review
• /
• v.18 no.3
• /
• pp.205-229
• /
• 2014

Global production networks (GPNs) emerged as multinational companies strategically relocated different stages of their value chain over many regions. Since GPNs require moving materials, parts, components and finished products across national borders multiple times, as well as coordinating it efficiently, they are intensified further within an integrated region. Within the region, developed countries which enjoy a comparative advantage in higher value-added tasks specialize in the production of ICT parts and components and exhibit high export RCA indices while developing countries show high import RCA indices. But, as developing countries upgrade technological capabilities and achieve industrial upgrading through participation in GPNs, their level of sophistication improves. East Asian countries have participated in GPNs to a greater degree when compared to countries in other regions because of a variety of factors. They have benefited much as shown by a significant increase in the level of ICT sophistication and export shares, which in turn led to uneven regional developments of GPNs in the ICT parts and components industry.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2010.05a
• /
• pp.101-104
• /
• 2010

A bulkhead-type pulse separation device has been developed for the multi-pulse rocket motor. The design parameters of the pulse separation device were the shape of the rupture disc slit, welding conditions, and the implementation of the seal disc. The pneumatic tests of the fabricated pulse separation devices showed that the rupture pressure increased as the quantity of the rupture disc slit and welding strength increased and the seal disc was implemented.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.02a
• /
• pp.254-254
• /
• 2012

최근 친환경 에너지원 및 에너지 저감기술을 바탕으로 한 자동차 부품산업이 재편되고 있다. 그 중, 극한의 산화전해질 환경에서 견뎌야하는 연료전지 분리막 소재와, 자동차 연비향상을 위한 엔진소재 개발 경쟁이 가열되는 상황이다. 이러한 소재에는 공통적으로 고 내식성과 내 마모성의 특성이 요구되는데, 스테인레스강은 이러한 조건에 적합한 소재이다. 왜냐하면, 사용분위기에 의해 산화막이 두꺼워지고 이로 인해 저항이 증가하는 현상 때문에 연료전지 부품에 질화를 하여 이런한 현상이 일어나지 않으면서 내식성은 유지하기 때문이다. 하지만, 표면경도가 낮아 내 마모성 저하로 부품의 수명을 떨어뜨리는 단점이 있다. 따라서, 고 내식성 유지하되, 표면경도는 향상하는 기술이 필요한데, S-phase 과고용 질화기술은 이러한 문제를 해결할 것으로 보여진다. 하지만, 이러한 층의 형성에도 불구하고, 스테인레스강 자체 소재제작 과정에서의 품질문제 및 가공경화로 인한 문제와 더불어 질화처리 후 표면계질의 석출상이나 크랙형성으로 인해 내식성은 오히려 저감되는 문제를 지니고 있다. 이에 대한 대안으로, 표면 질화처리 후 침탄 공정을 추가 도입하였다. 따라서, 본 연구 에서는 기존 질화공정에서 내식성 저하원인에 대한 분석 및 고찰하고, 또한 새롭게 제안된 질화 침탄 기술을 통해 질소뿐만 아니라 탄소원자의 침입으로 내식성 저하를 방지하는 동시에 표면경도 향상하는 새로운 연구결과를 보여주고자 한다.

• Clean Technology
• /
• v.13 no.2
• /
• pp.134-142
• /
• 2007

In this study, two methods to evaluate the disassemblability of the parts are proposed, which are constructed from the concepts of ease-of-disassembly and disassembly time. A method to evaluate the disassemblability of the products is consequently developed using the concept of minimum parts. The methods are applied to evaluate the disassemblability of computer cases. The results show the conclusions that the new model has less disassemblability than the old one. These methods are expected to be used for the evaluation of the possibility of remanufacturing and recycling of a part.

• Composites Research
• /
• v.22 no.2
• /
• pp.18-23
• /
• 2009

Failure of Kevlar29/Phenolic composite plate under high velocity impact of FSP(Fragment Simulation Projectile) is investigated using a non-linear explicit finite element code, LS-DYNA. Composite laminate and impactor are idealized by solid element and interface between laminas are modeled by tied-break element in LS-DYNA. Interaction between impactor and laminate is simulated face-to-face eroding contact algorithm. When the stress level meets a failure criteria, the layer in the element is eroded. Numerical results are verified by existing test results.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2008.11a
• /
• pp.293-296
• /
• 2008

Most of the guided weapons have been kept and transferred at the launching tube and fired in case of necessity in these day. Launching tube is a kind of case to protect the guided weapons from external environments and conducted as a guide when they are fired. When we attached the guided weapons to launching tube we usually has used explosive bolt. Explosive bolts have been used explosives when they had to be separated. But when they are separated there are some bad effects; a flame, fragments and pyro-shock. Because of these bad effects there are many restriction to use bolt as joining devices to precision guided weapons. To solve these problems, it has been invented ball type bolt. The present work was represented quantitively the margin of separation safty and separation mechanism in ball type bolt to analyse the dynamic separation test. Unlike explosive bolt, ball type bolt is separated without a flame, fragments and pyro-shock. And it also has a good mechanical properties as much as those of explosive bolt.

• Composites Research
• /
• v.34 no.6
• /
• pp.406-411
• /
• 2021

PEM (proton exchange membrane) fuel cells generate only water as a by-product, and thus are in the spotlight as an eco-friendly energy source. Among the various components composing the stack of the fuel cell, research on the bipolar plate that determines the efficiency of the fuel cell is being actively conducted. The composite bipolar plate has high strength, rigidity and corrosion resistance, but has the disadvantage of having a relatively low electrical conductivity. In this study, to overcome these shortcomings, a gas diffusion layer (GDL)-composite bipolar plate assembly was developed and its performance was experimentally verified. The graphite foil coating method developed in the previous study was applied to reduce the contact resistance between the bipolar plate and the GDL. In addition, in order to improve electron path in the stack and minimize the contact resistance between the GDL and the bipolar plate, a GDL-bipolar plate assembly was fabricated using a thin metal foil. As a result of the experiment, it was confirmed that the developed GDL-bipolar plate assembly had 98% lower electrical resistance compared to the conventional composite bipolar plate.