• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 2002.02a
• /
• pp.236-241
• /
• 2002

진공노즐방식의 파종기로 파종작업할 경우 박과채소의 대목으로 사용되고 있는 대립종자들의 최대파종율을 얻기위하여 참박, 특토좌, 흑종호박 종자에 대한 파종시험을 실시하였다. 1) 적정한 노즐구경과 홉착부압은 참박종자가 1.5mm, 7.97kPa, 특토좌종자가 1.5mm, 10.63kPa, 흑종호박종자가 2.0mm, 5.31kPa과 1.5mm, 13.28kPa로 나타났다. 2) 최적작동조건에서 참박종자, 특토좌종자 및 흑종호박 종자의 최대 파종율은 97.6%, 98.8% 및 97.6%로 나타났다. 3) 종자가 커지고 무거워짐에 따라 노즐의 구경이 큰 것이 유리한 것으로 나타났는데, 대목으로 사용되는 종자에서는 1.5mm노즐을 범용으로 사용가능하다는 결론을 얻었다. 4) 노즐개수가 많아지면 부착압력이 낮을 경우에는 파종율에 차이가 있었지만 부착압력이 높아지게 되면 파종율의 차이는 약간 낮아졌다. 5) 참박, 특토좌, 흑종호박 종자의 최대파종율을 나타내는 흡착부압 P = η.4W/$\pi$d$^2$로 나타낼 수 있고 여유계수 η ≒ 10으로 나타났다.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2023.11a
• /
• pp.39-40
• /
• 2023

Recently, due to the advancement of buildings, finishing methods using stone are increasing. However, finishing methods are not standardized and rely on workers' arbitrary methods. In stone finishing, many building defects occur due to adhesion performance, so the adhesion performance of stones attached with epoxy is important. Therefore, in this study, the adhesion performance of stones attached with epoxy was evaluated by exposing them to various environments. As a result of the experiment, the test specimens exposed to thermal shock showed only 20% of the standard test specimens' adhesion performance, and the test specimens cured at high and low temperatures showed the standard test specimens. It was expressed in 65-80% of the test specimens. Therefore, the adhesion performance of stone using epoxy was found to be vulnerable to repeated harsh environments.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.31 no.3A
• /
• pp.251-260
• /
• 2011

In this study, the effect of natural jute fiber volume fraction on the bond characteristics of polyolefin based macro fiber in natural jute fiber reinforced cement composites, including bond strength, interface toughness, and microstructure analysis are presented. The experimental results on polyolefin based macro fiber pullout test of different conditions are reported. Natural jute fiber volume fractions ranging from 0.1% to 0.2% are used in the mix proportions. Pullout tests are conducted to measure the bond characteristics of polyolefin based macro fiber from natural jute fiber reinforced cement composites. Test results are found that the incorporation of natural jute fiber can effectively enhance the polyolefin based macro fiber-cement matrix interfacial properties. The bond strength and interface toughness between polyolefin based macro fiber and natural jute fiber reinforced cement composites increases with the volume fraction of natural jute fiber. The microstructural observation confirms the findings on the interface bond mechanism drawn from the fiber pullout test results.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.12 no.3
• /
• pp.247-255
• /
• 2010

Bonding strength of shotcrete is a significant influential factor which plays the role of collapse prevention of tunnel crown and of debonding prevention of shotcrete induced by the blasting vibration. Thus, the evaluation of the shotcrete bonding state is one of the core components for shotcrete quality control. In this study, the peak particle velocities induced by blasting were measured on the shotcrete in a tunnel construction site and its effect on the bonding state of shotcrete is investigated. Drilling and blasting technique was used for the excavation of intersection tunnel connecting the main tunnel with the service tunnel. Blast-induced vibrations were monitored at some points of the main tunnel and the service tunnel. The shotcrete bonding state was evaluated by using impact-echo test coupled with the time-frequency domain analysis which is called short-time Fourier transformation. Analysis results of blast-induced vibrations and the time-frequency domain impact-echo signals showed that the blasting condition applied to the excavation of intersection tunnel hardly affects on the tunnel shotcrete bonding state. The general blasting practice in Korea was evaluated to have a minor negative impact on shotcrete quality.

• 어항어장
• /
• s.80
• /
• pp.47-49
• /
• 2007

패각을 사용한 사료 배양기질은 패각에 의해 복잡한 공간이 다수 형성되어 많은 소형 생물의 증식에 좋은 조건을 만들어 내고 도 패각에 부착한 소형 생물을 먹기 위해 물고기가 모이고, 많은 해초류도 번성하는 것으로 알려져 있다.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.5 no.1
• /
• pp.53-58
• /
• 2017

FRP Hybrid Bar, composed of an embedded steel and the coated composites with epoxy and glass fiber, is an effective construction material with tension-hardening performance and lightweight. The epoxy exposed to UV(Ultra Violet Rays) and FT(Freezing and Thawing) action easily shows a surface deterioration, which can cause degradation of bonding strength between inside-steel and outside-concrete. In the present work, surface inspection for 3 different samples of normal steel, FRP Hybrid Bar before UV, and FRP Hybrid Bar after UV test was performed, then concrete samples with 3 reinforcement types were prepared for accelerated FT test. Through visual inspection on 3 typed reinforcement, no significant deterioration like chalking was evaluated. The results from FT test to 120 and 180 cycles showed FRP Hybrid Bar exposed to UV test has higher bonding strength than normal steel by 106.3% due to enlarged bond area by silica coating. The 3 cases showed a similar bond strength tendency with increasing FT cycles, however a relatively big deviations of bond strength were evaluated in FRP Hybrid Bar after UV test due to loss of silica coating.

• Journal of Korean Society of Environmental Engineers
• /
• v.31 no.7
• /
• pp.515-520
• /
• 2009

This study investigated the influence of oxyanions (nitrate, carbonate, phosphate) on the attachment of bacteria (Bacillus subtilis) to Al-Fe bimetallic oxide-coated sand using column experiments. Results showed that bacterial attachment to the coated sand was independent of nitrate concentration. Bacterial mass recovery remained constant (10.9${\pm}$0.2%) with varying nitrate concentrations (0.1, 1, 10 mM). In case of carbonate, mass recovery increased from 25.6% to 39.0% with increasing carbonate concentration from 0.1 mM to 1 mM, and mass recovery also increased from 50.9% to 78.9% at the same concentration condition in case of phosphate. This phenomenon could be attributed to the hindrance effect of carbonate and phosphate to bacterial attachment to the coated sand. Meanwhile, with increasing carbonate/phosphate concentration from 1 mM to 10 mM, mass recovery decreased from 39.0% to 23.8% and from 78.9% to 52.6%, respectively. This phenomenon could be ascribed to the enhancement effect of free carbonate/phosphate ions present in solution phase due to increasing carbonate/phosphate concentration, which increase ionic strength and thus enhance bacterial attachment to the coated sand. In our experimental conditions, the effect of phosphate to bacterial attachment to the coated sand was the greatest among phosphate, carbonate, and nitrate.

• Proceedings of the Korean Society of Dyers and Finishers Conference
• /
• 2012.03a
• /
• pp.100-100
• /
• 2012

상품성이 떨어지는 B, C급의 Split leather에 감온 기능성 Film을 부착하고, Film 부착 공정에서 유성 접착제의 사용을 배제한 친환경적인 고급 Laminated split leather를 제조 하였다. 온도에 따라 색이 변하는 감온 Microcapsule 염료를 이용한 Film의 색도, Touch감과 신장 등의 최적조건을 찾는 실험으로서 수성 PU 접착제, Wetting&levelling agent, 증점제, 감온 microcapsule 염료를 상온에서 혼합하여 Film을 제조한 다음 수성 PU 접착제와 Urethane용 경화제를 혼합한 접착제를 이용하여 가죽에 부착시켰다. 감온 microcapsule자체의 색도가 떨어지므로 두 번 코팅하는 방법으로 이 문제점을 보완 하였으며, 감온 microcapsule 염료의 함량에 따른 물성 평가를 하였고, 감온 microcapsule 염료를 이용한 Film 공정을 확립 하였다.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 1995.10a
• /
• pp.172-178
• /
• 1995

보강평판은 평판에 각종 보강재를 용접등의 방법에 의해서 종방향, 횡방향, 경사 또는 임의의 방향으로 부착시켜 굽힘 및 비틀림 강성을 향상시킨 구조요소이다. 이러한 구조요소는 구조적 필요성이나 경량화 설계에 따라 선박의 deck, 철도 차량, 항공기 및 자동차 등의 각종 구조물에서 부하능력 및 경제성을 증대시키기 위하여 널리 사용되고 있고, 또한 자동차용 오일팬, 가전기기의 케이싱과 모터의 케이싱등에도 사용되고 있다. 최근 현장에서는 이러한 구조물의 진동 감소 및 방진 문제가 큰 관심사가 되고 있다. 본 논문은 정사각형 알루미늄 평판에 +자 형태의 Box Beam 보강재를 편면 보강하고 4변 자유단의 경계 조건을 설정하였다. 보강재는 유한요소 정식화 과정을 통하여 평판 요소에 등가시키고, 2차원의 평판 구조로 보강 평판을 모델링하고 구조해석 프로그램인 ANSYS를 이용하여 해석하였다. 실험은 Impact Test에 의해서 주파수 응답 함수(FRF)를 각 시편에 대해서 구하고 이를 해석의 고유진동수와 비교하였다. 그리고 보강재가 임의의 각도로 평판에 부착되었을 때 고유진동수의 변화와 진동 모드(mode shape)를 분석하였다.

• Proceedings of the Korean Society of Applied Pharmacology
• /
• 1993.04a
• /
• pp.145-145
• /
• 1993

일반적으로 단백질의 정제를 위한 가장 효과적인 방법은 affinity chromatography법으로 알려져 있다. 본 연구에서는 베타 수용체의 순수정제를 위한 효과적인 affinity matrix를 제조하고 이의 특징을 확인함으로써 수용체 정제를 위한 기초를 수립하고자 하였다. Bisoxirane reagent인 1,4-butanediol diglycydyl ether를 Sepharose CL-4B gel과 반응시켜 탄노원자 10개 길이의 spacer arm을 부착시켰다. 여기에 sodium persulfate, dithiothreitol을 연속적으로 사용하여 -SH기를 도입시긴 추 free radical 반응을 이용하여 베타수용체 길항제인 alprenolol을 부착시킴으로써 affinity gel을 제조하였다. alprenolol치 부착반응을 위한 최적온도는 4$0^{\circ}C$로 나타났으며, semimicro Kjeldahl 질소 분석법을 적용하여 gel을 분석한 결과 ml당 0.4-0.6 $\mu$ mol의 alprenolol이 결합하였음을 확인하였다.