• Applied Biological Chemistry
• /
• v.24 no.3
• /
• pp.181-185
• /
• 1981

Distribution of pesticide deposit on the upper and lower halves of rice plants sprayed with various dilution and dosage of fenitrothion EC, Imidan WP, diazinon EC and phenthoate EC was studied under paddy field. Increasing dilution or dosage of the pesticides resulted in high level of deposits on the lower half of rice plants. The distribution of pesticide deposits on the upper half of Milyang 23 was higher than that of Akibare irrespective of pesticides, dilution and dosage.

• Polymer(Korea)
• /
• v.38 no.6
• /
• pp.820-826
• /
• 2014

The objective of this study is to find the relationship between the tensile strength of the polymer film and the bond strength and tensile strength of the polymer-modified mortar using styrene (St) and butyl acrylate (BA), and porosity. In the test results, the bond strength and tensile strength of the polymer-modified mortar increased with increases in the tensile strength of polymer film and the fine pore volume.

• Journal of Biosystems Engineering
• /
• v.24 no.6
• /
• pp.479-486
• /
• 1999

A measurement method for the deposition amount of spray, using tracer and spectrophotometer was developed. Food colors was selected as tracer, because it was cheep and easily treatable. Using NIRS(Near Infrared Reflection Spectrophotometer), regression curves between absorbance spectrum and concentration of the tracer were obtained. Yellow food colors showed the peak of spectrum at 452nm, and absorbance of peak showed a tendency to increase as concentration increased. Also, the possibility of concentration control by heating was investigated.

• Proceedings of the Korean Society of Postharvest Science and Technology of Agricultural Products Conference
• /
• 2003.04a
• /
• pp.115.1-115
• /
• 2003

충청북도농업기술원 균이팀에서 재배한 검은비늘버섯 국수를 제조하기 위해서 밀가루에 3, 5, 7%의 버섯분말을 첨가하여 국수를 제조하고 그 품질 특성을 조사하였다. Farinograph를 이용하여 최고점도와 최종점도 및 노화도를 조사한 결과 무처리보다 버섯첨가구에서 모두 낮은 값을 나타내었으며 첨가량이 증가할수록 낮아지는 경향을 나타내었다. 버섯분말 첨가량이 증가함에 따라 수분 흡수율은 약간 증가하였다. 색도는 버섯분말의 첨가량이 증가함에 따라 분말, 반죽, 국수 등 모든 처리구에서 명도는 낮아졌으며, 적색도와 황색도는 증가하는 것으로 나타났다. 버섯국수 조리 후 중량과 부피는 버섯분말 및 식초 전처리 농도가 증가할수록 감소하였으며 국물의 탁도는 큰 차이가 없었다. 조리면의 물성 측정 결과 버섯분말 첨가량이 증가함에 따라 부착성, 탄력성, 씹는감은 증가하였으며, 부착성은 식초 0.2% 처리구보다 0.5% 처리구에서 감소하는 경향을 나타냈다. 관능검사 결과 식초 0.2%액에 침지한 후 건조한 버섯분말 5%을 첨가하여 제조한 처리구에서 기호도가 가장 높게 나타났다.

• The monthly packaging world
• /
• s.329
• /
• pp.96-99
• /
• 2020

환경부는 지난 8월 19일 플라스틱의 재활용률을 높이고 발생량 저감을 유도하기 위해 먹는샘물 용기에 부착하던 표시사항(라벨)을 병마개에 부착을 허용하는 등 현행제도 운영상 미흡한 부분들을 개선·보완하기 위해 '먹는샘물 등의 기준과 규격 및 표시기준 고시' 일부개정령(안)을 행정예고했다. 다음에 그 주요내용에 대해 살펴보도록 한다.

• Journal of Embryo Transfer
• /
• v.16 no.2
• /
• pp.117-125
• /
• 2001

Vitrification of oocytes has been applied recently fur pigs, but remains elusive. The purpose of this study is to investigate the effects of vitrification in open pulled straws (OPS) on in vitro survival of porcine oocytes. When immature follicular oocytes frozen-thawed were cultured for in vitro maturation, maturation rates to metaphase-II stage were higher in oocytes with (25%) than without (15%) cumulus cells. After In vitro fertilization of oocytes frozen-thawed, the maturation rates were also significantly (P<0.05) higher in oocytes with (41%) that than without (17%) cumulus cells. However, the penetration rates were higher in oocytes without (19%) that than with (9%) cumulus. In another experiment, porcine oocytes matured in vitro were frozen and thawed for in vitro fertilization. The penetration rates were higher than in oocytes without (35%) that than with (26%) cumulus cells. However, the proportions of oocytes dead after in vitro fertilization were significantly (P<0.05) higher in oocytes with that than without cumulus cells. On the other hand, the rates of penetration and dead oocytes at 6 h after in vitro fertilization were not significant differences between oocytes with and without cumulus cells. However, the proportions of dead oocytes with (18%) and without (16%) cumulus cells were higher than in oocytes of control group (0%). These finding indicated the possible broader application for OPS, as they demonstrated that the maturation and fertilization in vitro by frozen-thawed oocytes may be accompained by cumulus cells and culture periods according to the requirements of the survival ability after freezing of mature and immature oocytes in pigs.

• Journal of the Korean Orthopaedic Association
• /
• v.54 no.4
• /
• pp.343-352
• /
• 2019

Purpose: The purpose of this study was to document the sonographic morphology of the subscapularis footprint, particularly the 1st facet, of the non-pathologic subscapularis tendon and footprint, and analyze the correlation between the size of the 1st facet and the demographic variables. Materials and Methods: Between March 2015 and December 2017, retrospectively data analysis was performed for the ultrasound (US) scans of 115 consecutive shoulder (mean age 53.4 years, range 23-74 years) with non-pathologic subscapularis tendon and footprint. The sonographic findings of the 1st facet of the subscapularis footprint was a very unique, flat, broad, and plane angle in the upward direction, which were distinguished from the other facets. On US, the transverse (medio-lateral) and longitudinal (superior-inferior) length of the 1st facet on axis of the humerus shaft were recorded. The demographic variables, including age, site, body height, weight, body mass index (BMI), and arm length, were reviewed. Results: On US, the mean transverse length of the 1st facet was 12.75 mm (range 10.54-14.50 mm, standard deviation [SD] 0.712) and the mean longitudinal length was 12.22 mm (range 9.20-13.30 mm, SD 0.888). The transverse and longitudinal length of the size of the 1st facet were significantly greater in males than in females (p<0.001, p=0.001). Of the demographic data (body height, weight, BMI, arm length) that showed a significant positive linear correlation, the correlation with body height (transverse r=0.749, p<0.001; longitudinal r=0.642, p<0.001) showed the strongest relationship, and the correlation with the BMI was weakly related. The relationships between the size of the 1st facet to site/age were not statistically significant or appeared to have no linear correlation. Conclusion: The structural and morphologic features of the 1st facet of the subscapularis footprint on the US were identified. This will provide anatomic knowledge of an US examination for subscapularis tendon pathology.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.20 no.6
• /
• pp.30-39
• /
• 2016

An experimental study was performed to investigate flexural performance and bond characteristics of RC beams strengthened using ductile polyethylene terephthalate(PET) with low elastic modulus. Bond tests were planned and completed following CSA S806. Test variables were fiber type and fiber amount. Also, total of 8 RC beams was tested. Major test variables of the beam tests included section ductility(${\mu}=3.4$, 7.0), fiber type(CF, GF, PET) and amount of fiber strengthening. Moment-curvature analyses of the beam sections were also performed. In bond tests, the bond stress distribution as well as the maximum bond stress increased with increasing amount of PET. In case of 10 layers of PET, the effective bond length was 60 mm with the maximum and the average bond stress of 2.33 and 2.10 MPa, respectively. RC beam test results revealed that the moment capacity of the RC beams strengthened using PET 10 and 20 layers increased over the control beam with little reduction in ductility by fiber strengthening. All beams strengthened using PET resulted in ductile flexural failure without any sign of fiber debonding or fiber rupture. It was important to include the mechanical properties of adhesive in the moment-curvature analysis of PET-strengthened beam sections.

• Journal of Aquaculture
• /
• v.9 no.1
• /
• pp.65-71
• /
• 1996

To estimate the variation of food organisms on the corrugated PVC sheets, we analysed the chlorophyll a and. pheopigments of the benthic microalgae on the sheets from the oyster culture ponds. We estimated the standing crops as the amounts of chlorophyll a, and the physiological state of cells as the pheopigments level in the benthic microalgae. The amount of chlorophyll a was increased by immersion time in winter but the peak was observed every two weeks in summer, while the ratio of pheopigments was highest in summer but the low level was observed in spring and autumn. These seasonal variation were well coincided with the natural spawning season and the good microalgae nutritional valance.

• Journal of the Korea Concrete Institute
• /
• v.14 no.4
• /
• pp.549-555
• /
• 2002

Tensile strength of CFRP (Carbon Fiber Reinforced Polymer) is approximately 10 times higher than that of the steel reinforcement, but the design strength of CFRP is normally limited by unpredictable bond failure between RC and CFRP. Many researches concerned with bond behavior between RC and CFRP have been carried out to prevent the bond failure of RC beam strengthened by CFRP, but the national design code for design bond strength of CFRP has not been constructed. In this study, three beam specimens strengthened by CFRP under the parameters of bonded length were tested to derive the design bond strength of CFRP for the RC flexural members. Each bonded length was calculated based on the bond strength of JCI and CFRP manufacturing company. Also, another two beam specimens strengthened by CFRP were tested to inspect the construction environment effects such as mixing error of epoxy resin, and the amount of epoxy primer. From the test results, it is concluded that the maximum design bond strength of CFRP to RC flexural member is considered to be $\tau$a =8 kgf/㎠.