• 열린충남
• /
• s.40
• /
• pp.172-181
• /
• 2007

• Journal of agricultural medicine and community health
• /
• v.36 no.4
• /
• pp.264-279
• /
• 2011

Objectives: The aims of this study were to evaluate the effect of a metabolic syndrome management program on participants enrolled in a public health center program in, Seoul, Korea for 6 months and to analyze the changes in their life habits and risk factors for treating their metabolic syndrome. Methods: Participants enrolled in a metabolic syndrome program at a public health center and answered questionnaires. Their waist circumference and, blood pressure were measured and their blood was tested. Based on the results, the participants were classified into 3 groups. Then, the center provided a metabolic syndrome management intervention program for the individual groups and analyzed the changes in participants' life habits and risk factors after 6 months. Results: After the intervention, the active group, showed improved physical activity, increased eating habits by 0.7 points, and decreased drinking and smoking; however, these results were not statistically significant. As for the Participants' overall health status, all groups positively changed a statistically significant result. In regard to the change in risk factors for metabolic syndrome in the active group, systolic and diastolic blood pressure and triglyceride levels were, statistically significantly decreased, meanwhile, an increase was found in HDL cholesterol level, waist measurement, and anteprandial glucose level; but the result were not statistically significant. Their review rate was 19.0%; 29.4% in the active group, 19.0% in motivating group A, and 14.5% in motivating group B. Conclusions: Participants showed changes in some life habits and risk factors, a result still far from the program's goal to improve residents' health status (improved living habits and variations in risk factors); thus, it is necessary to supplement this program for better performance.

• The korean journal of orthodontics
• /
• v.36 no.5
• /
• pp.349-359
• /
• 2006

Objective: Nickel-titanium alloy wire possesses excellent spring-back properties, shape memory and super-elasticity. In order to adapt this wire to clinical use, it is necessary to bend as well as to control its super-elastic force. The purpose of this study is to evaluate the effects of heat treatment on the load-deflection properties and transitional temperature range (TTR) of nickel-titanium wires. Methods: Nickel-titanium wires of different diameters ($0.016"\;{\times}\;0.022"$, $0.018"\;{\times}\;0.025"$ and $0.0215"\;{\times}\;0.028"$) were used. The samples were divided into 4 groups as follows: group 4, posterior segment of archwire (24 mm) without heat treatment; group 2, posterior segment of archwire (24 mm) with heat treatment only; group 3, anterior segment with bending and heat treatment; group 4, anterior segment with bending and 1 sec over heat treatment. Three point bending test was used to evaluate the change in load-deflection curve and obtained DSC (different scanning calorimetry) to check changes in $A_f$ temperature. Results: In the three point bending test, nickel-titanium wires with heat treatment only had higher load-deflection curve and loading and unloading plateau than nickel-titanium wires without heat treatment. Nickel-titanium wires with heat treatment had lower Af temperature than nickel-titanium wires without heat treatment. Nickel-titanium wires with heat treatment and bending had higher load-deflection curve than nickel- titanium wires with heat treatment and nickel-titanium wires without heat treatment. Nickel-titanium with heat treatment of over 1 sec and bending had the highest load-deflection curve. Nickel-titanium wires with heat treatment and bending had lower Af temperature, Nickel-titanium wires with heat treatment of over Af sec and bending had the lowest Af temperature. Conclusion: From the results of this study, it can be stated that heat treatment for bending of Nickel-titanium wires does not deprive the superelastic property but can cause increased force magnitude due to a higher load-deflection curve.

• Journal of Chest Surgery
• /
• v.34 no.11
• /
• pp.809-822
• /
• 2001

Background: Ischemic preconditioning(IP) is known to be effective in the protection of myocardial necrosis, arrhythmia, and the restoration of the myocardial function in the ischemia-reperfusion state of the heart. However the exact mechanism is not clearly understood. The purpose of this study was to elucidate the trigger mechanism 7f IP on the restoration of the myocardial function after ischemia-reperfusion. Material and Method: By connecting a Langendorff perfusion apparatus with an isolated heart of a rat, the normal temperature of the heart was maintained. The experiment was conducted in seven groups, which were divided according to the preconditioning stimuli and blockage methods Group I(n=10) was a group without IP, Group II(n=10) a group of three-minute IP, Group III(n=10) a group of PEIP, Group IV(n=10) a group of clonidine IP, Group V(n=10) a group of If after reserpine, Group Vl(n=10) a group of PE & prazosin IP, and Group Vll(n=10) a group of clonidine & yohimbine IP. Hemodynamic parameters of DP, LVEDP, $\pm$dP/dT and the changes of perfusion in the coronary artery were evaluated. Result: Developed pressure and +dP/dT changed per unit time. After 20 minutes of reperfusion, those of Group II and III were 63.1$\pm$3.7%, 64.8$\pm$4.6% and 64.5$\pm$4.6%, 63.8$\pm$4.4%, which improved more significantly than those of Group I(P<0.05), However, there were no significant differences between the Groups V and Vl, and Group I. Conclusion: The Brief ischemic preconditioning and pharmacological preconditioning using $\alpha$-receptor sympatho-mimetics have protecting effects on the restoration of myocardial function after reperfusion. And the protecting effect of preconditioning seems to be related to sympathetic neurotransmitters and to the selective action of the $\alpha$$_1$-adrenergic receptor.

• 한국벤처창업학회:학술대회논문집
• /
• 2020.11a
• /
• pp.157-161
• /
• 2020

최근 우리 사회는 코로나 19(COVID 19)와 4차 산업혁명으로 인한 노동시장의 불안과 더불어 매년 증가하고 있는 청년실업의 해결책으로 청년창업에 관심이 집중되고 있고, 창업지원 정책 또한 다양하게 시행하고 있다. 이와 관련 군에서도 일과 후 자기 개발을 통한 생산적 군 복무로 부대 전투력 극대화와 개인의 경력 단절 최소화를 위한 일환으로 2018년 부터 '청년 Dream, 국군 드림' 이라는 역점 사업을 추진 중에 있다. Dream의 알파벳중 'Ⓡ 창·취업 기회 제공(Raising Job Opportunities)'의 경우 2020년 3월 기준 육군은 약 870여개의 창업동아리를 운영하고 있다. 하지만 군부대의 특성상 전투임무 수행에 우선순위가 있다보니 창업동아리를 능동적으로 운영하기에는 여러 가지 제약사항이 있으며, 군 창업동아리와 관련된 선행연구 또한 미천한 수준에 머무르고 있다. 본 연구의 목적은 군 창업동아리 활동 장병 200명을 대상으로 '군 장병의 개인 특성(성취욕구, 자기효능감, 동기부여)과 기업가정신(혁신성, 진취성, 위험감수성)이 창업의지에 미치는 영향'을 분석해 보는데 있다. 이를 통해 군 장병을 대상으로 하는 군 창업동아리 활동이 지속적으로 운영 될 수 있는 방안을 모색해 보고, 실질적인 교육지원 방향을 제시하는 등 군 조직 역량 강화와 개인 발전, 그리고 군 창업동아리 활성화 방안에 대해 논의해 보고자 한다.

• Proceedings of the KOR-BRONCHOESO Conference
• /
• 1987.05a
• /
• pp.10.1-10
• /
• 1987

표준청각검사와 자기청력검사는 청력역치의 측정으로 난청의 종류를 구별하고 누가현상유무를 판정하며, 사청검사를 할 수 있는 공통점을 갖고 있다. 그러나 표준청력검사는 동일강도의 음을 부여하는 대신 자기청력검사는 음의 증강 및 감약이 계속되는 음을 부여하는 점이 양자의 상이점이다. 이런 차이로 인해 자기청력검사에는 일과성 역치 상승(temporary threshold shift)현상이 일어나 청력 역치가 높을 수 있다. 양자의 역치차가 각 청력군별로 어느 정도차이가 있는가를 관찰할 목적으로 정상청력군 50명 (100이), 전음성 난청군 41명(50이), 감각신경성 난청군 38명(50이)을 대상으로 표준 및 자기청력검사의 기도측정을 실시하여 양 검사의 차를 구하고 그 결과를 다음과 같이 요약하였다. 1) 정상청력군과 전음성 및 감각신경성 난청군 모두 자기역치가 표준역치 보다 높게 측정되는 경향으로 난청군에서 더욱 높게 측정되었다. 그러나 자기역치가 낮은 예도 많았다. 2) 양 검사의 일치범위를 $\pm$10㏈로 하면 정상 청력군은 94%, 전음성 난청군 85%, 감각신경성 난청군 79%에서 양 검사가 일치하였다. 3) 자기역치에서 표준역치를 추정할 수 있는 범위는 정상군에서는 5~-l0 ㏈, 난청군에서는 5~-15 ㏈ 의 변동폭이었다. 4) 양 검사의 역치차가 $\pm$20 ㏈이상인 예도 많아 양 검사는 서로 독립된 검사라고 생각되었다.

• Korean Journal of Heritage: History & Science
• /
• v.49 no.2
• /
• pp.104-121
• /
• 2016

Royal tombs in Neungsan-ri had been studied several times during the Japanese Colonial era. But, conceiving the general complexion of them is difficult for lack of data and analysis of previous studies are still insufficient. Thus, necessity of new approach and understanding in Royal tombs in Neungsan-ri are emphasized by the reviewing existing studies and conservation history. The Serial numbers of the Royal tombs in Neungsan-ri has been registered arbitrarily without clear guidelines from Japanese Colonial era until present time. It means previous studies were devoid of consideration for serial number changes. And, research has shown that Royal tombs in Neungsan-ri counts at least twenty, taking No.8 tomb of recent study into consideration. Moreover, in case of eastern tombs it needs changes in the existing perception that Royal tombs in Neungsan-ri consist of only six-tombs because there was no difference between eastern tombs and central sixtombs considering the burial chamber and lacquered wooden(koyamaki) Coffin. Ultimately, current state of Royal tombs in Neungsan-ri doesn't have authenticity because they had been found and regulated in the Japanese Colonial era. Consequently, it is required to overall study into entrance to burial chamber and covered burial stone marker and exaggerated mounds, ignored another tombs other than six-tombs in the center.

• Journal of the Economic Geographical Society of Korea
• /
• v.19 no.4
• /
• pp.712-728
• /
• 2016

This study examines the foundations of contract farming, the extent of corporate vertical coordination, and farmer's land use in regards to the contract farming between discount store and watermelon farmers in Buyeo-gun, Chungcheongnam-do. In the above case, contract farming is led by the group of producers. As the corporate's role is limited due to the specification of watermelon breed, contract farming takes the form of procurement contract with restrained levels of corporate vertical coordination. Thus, it has become common for contract farmers to freely enter and leave contracts and sign contracts with multiple clients. Furthermore, farmers participate in contract farming by using contract breeds in existing crop rotation systems. Through this process, watermelon farming is undergoing a process of diversification via the spread of contract varieties in this region.

• The Journal of Korean Academy of Prosthodontics
• /
• v.46 no.4
• /
• pp.409-419
• /
• 2008

Statement of problem: At all times people have tried to fabricate tooth restorations using tooth colored materials. Recently, demands for esthetics, even in restorations requiring strength, has brought a revolution to dentistry and increased use of zirconia. The basic color of zirconia is white to ivory. The color can be partially adapted by veneering it with ceramic materials. However, it would be better if the substructure could already be adapted to the basic color shade of neighboring teeth. By adaptation to the basic shade, it can help to reduce the necessary layer thickness of the veneer ceramic to achieve the desired color. Purpose: The purpose of this study was to spectrophotometrically evaluate the influence of shading of zirconia core on the final shade of all-ceramic restorations using the CIE $L^{*}a^{*}b^{*}$ system. Material and methods: Core specimens (n = 20 per group) of Lava Frame Zirconia, KaVo Everest Zirconia, Digident CAD/CAM Zirconia were fabricated at 20 mm in diameter and 0.5 mm in thickness. Halves of each groups were shaded in A3 color. These core specimens were veneered with A3 porcelain of the recommended manufacturer at thickness of 0.5 mm. CIE $L^{*}a^{*}b^{*}$ coordinates were recorded for each specimen with a spectrophotometer (Model CM-2600d, Minolta, Japan) at 0.5 mm, 0.4 mm, 0.3 mm in thickness. Color differences were calculated using the equation ${\Delta}E^{*}=[({\Delta}L^{*})2+({\Delta}a^{*})2+({\Delta}b^{*})2]1/2$. Results: 1. In the case where porcelain layer has a thickness of 0.5 mm, Lava Frame Zirconia and KaVo Everest group did not show clinically perceived color difference, however Digident CAD/CAM Zirconia group showed clinically perceived color difference according to shade allowed on core. 2. When the thickness of porcelain layer decreased from 0.5 mm to 0.4 mm, Lava Frame Zirconia and KaVo Everest group did not show clinically perceived color difference, on the other hand Digident CAD/CAM Zirconia group showed clinically perceived color difference according to shade allowed on core. 3. When the thickness of porcelain layer decreased from 0.5 mm to 0.3 mm, clinically perceived color differences were observed from all three groups. Conclusions: Ziroconia system, which is possible to allow shade on core, are thought to be much more favorable to reproduce natural shade compared to systems that is impossible to give shade. Therefore, clinicians ought to choose adequate system for certain clinical situation by considering above specific character.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.24 no.1
• /
• pp.67-76
• /
• 2008

Implant requires long lasting, strong osseointegration using bio-mechanical interlocking by bone ingrowth. In regarding the size level for bone ingrowth, the micro-patterning would enhance bone response. Micro-patterning can increase the area contacting the bone tissues. Therefore, it may distribute the load to the surrounding bone tissue, more effectively. This study compared and analyzed the load distributing effect with the shape and number of micro-patterning. For the optimal comparison of threads, the assumptions different from general finite element analysis model were made. It was assumed that the implant was axisymmetric and infinitely long. The implant was assumed to be completely embedded in the infinitely long cortical bone and to have 100% bone apposition. The implant-bone interface had completely fixed boundary conditions and received an infinitely big axial load. The condition of threads were as follows. The reference model 1 had conventional thread. Model 2 had 2 micro-patterns on the upper flank of the thread. Model 3 had 2 micro-patterns on the lower flank of the thread. Model 4 had 2 micro-patterns on the upper and lower flanks of the thread. Model 5 had 3 micro patterns on the upper and lower flanks of the thread. The results were as follows: 1. The thread with micro-patterns distributed stress better than the conventional thread. 2. The thread with micro-patterns on the lower flank distributed stress better than that with micro-patterns on the upper flank. 3. The thread with 3 micro-patterns distributed stress better than that with 2 micro-patterns, However, an area with stress concentration occurred.