• Journal of Korean Society of Steel Construction
• /
• v.20 no.2
• /
• pp.313-321
• /
• 2008

Recently in Japan, fracturing was observed on the diagonal member of a through truss bridge at the boundary region with the concrete slab. Local corrosion damage where the diagonal member was enclosed in the concrete slab is an important factor in the fracture. In this study, accelerated exposure tests were carried out on concrete-steel model specimens simulating steel members at the boundary with concrete. Fatigue tests were then performed on the corroded model specimens. Accelerated exposure tests of the S6-cycle, which is carried out on the model specimens for 150, 300, 450 and 600 da ys. Their surface geometry was then measured. From the accelerated exposure test results, change in maximum and mean corrosion depths was determined according to the testing periods. The effect of local corrosion on fatigue strength was also presented based on the fatigue test results.

• Journal of Korean Society of Steel Construction
• /
• v.21 no.3
• /
• pp.301-310
• /
• 2009

Steel has been widely used as a material in temporary structures. Corrosion attack often reduces the long-term durability of temporary steel members that are not protected from corrosion. In designing temporary steel structures, it is difficult to evaluate their long-term durability, since the thickness loss of steel members is not clear. In this study, laboratory and field exposure corrosion tests were performed on structural steel plate specimens, and the loss of thickness of specimens that were exposed to a subway construction site for 11 months and of specimens that were exposed to environments with controlled humidity and calcium chloride for six months were measured. Finally, a thickness loss equation was formulated based on the environmental conditions and the testing periods.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2018.11a
• /
• pp.88-91
• /
• 2018

국내 연안에 설치된 항로표지(등부표,등대 등) 대부분이 철근 콘크리트 형식으로 제작 설치 되어 있다. 초기 구조물 제작시 파손 및 전단, 염해에의 한 콘크리트의 부식에 대한 인식 부족으로 일반적인 색상표시 도장방식으로 마감처리 하여 설치 하였다. 이로 인하여 콘크리트의 파손, 도장부의 탈락으로 인하여 매년 유지보수비용이 투입되고 있는 실정이다. 또한 부식진행 후 현장여건상 보수도장이 취약하고 보수 후에도 내구성 부족(방오수명 2년~3년)으로 지속적인 관리가 필요하다. 그러므로 항로표지의 신규 설치시 강관조 형식의 설계적용이 요구되며 강관조의 가장 큰 취약점인 부식(녹)에 대한 방오방법의 연구가 지속적으로 진행되고 있다. 또한 기 설치된 해상 금속구조물의 경우 보수작업시 장비반입, 작업시간, 작업여건 등이 비말대, 간만대에 따라 변동 하므로 원칙적인 보수가 불가능한 상황에 있다. 그러므로 초기 제작시 부식에 대한 방오도장이 시행 되어야 한다. 기 설치된 콘크리트 구조물 등표는 원칙적인 구조보강 검토 후 염해, 중성화 방지 도장을 시행 하여야 하며 이에 대한 연구를 진행하고 있다.

• Journal of Korean Society of Steel Construction
• /
• v.28 no.4
• /
• pp.213-222
• /
• 2016

For a steel structure with long service period, structural performance can be changed or decreased by corrosion damage occurred under severe corrosion environment condition. In this study, to examine compressive strength and behavior of circular steel member depending on corrosion damage, compressive loading tests were conducted using circular steel member with artificial corrosion damage which was applied by mechanical process and hand drill. From test results, local corrosion area and pattern is related to their structural performance. Their lcoal bucklings were occurred near artificially sectional damaged part. Reduction in compressive strength of circular steel member was also suggested according to their corroded part and damage.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2012.11a
• /
• pp.124-124
• /
• 2012

부식 현상은 산업과 실생활에서 경제적, 인간의 생활과 안전에서 손실을 일으키는 요인이다. 자동차 부품, 선박 부품 및 전자 부품 산업 등 다양한 분야에서 수명 및 고장율 시험에 대한 관심이 증가하고 있다. 넓은 분야에서 염수분무시험을 적용하고 있지만, 실제 야외환경에서 발생하는 부식과의 상관관계가 확실하게 규명되어 있지 않다. 그리고 이렇게 넓은 산업전반에서 적용하고 있는 염수분부시험 방법은 시료의 부식 저항성을 판단하기 위한 시험시간이 오래 걸리고 이런 이유로 적정한 시험시간을 설정하기 어려울 뿐만 아니라 고내식성 시료의 부식평가가 어렵다는 단점을 가지고 있다. 본 연구에서는 부식의 형태에서 균일부식 현상을 이용하여 옥외 노출 부식시험과 염수분무시험, 가속부식시험 환경에 노출된 시료의 무게 감량을 측정하여 가속계수 도출과 함께 부식 정도를 예측할 수 있는 방법을 연구하였다.

• Research in Plant Disease
• /
• v.20 no.1
• /
• pp.37-49
• /
• 2014

A total of 2,714 methanol extracts of 1,677 plant species in 178 families were screened for nemastatic activity against Rhabditis sp. by 96-well microplate bioassay. The plant extracts with a concentration of $5,000{\mu}g/ml$ were mixed with aqueous nematode solution containing about 20 Rhabditis sp. and their activity was examined daily for 7 days. Out of 2,714 plant extracts examined in this test, 2,362 (87.0%) showed no negative influence on the nematode activity, while 187 (6.9%) inhibited nematode activity about 50%, 95 (3.5%) inhibited nematode activity over 90%, and 70 (2.6%) rather enhanced nematode activity. Among those showing over 50% nemastatic activity, 25 extracts were randomly selected for further screening with Rhabditis sp. and with juveniles of Meloidogyne incognita. The screening revealed that 11 extracts (44%) were consistently nemastatic. The 282 extracts with nemastatic activity could be of use in future studies on nematicidal plants.

• Journal of Korean Society of Steel Construction
• /
• v.20 no.5
• /
• pp.591-599
• /
• 2008

Weathering steel has been widely used in bridges and cladding materials due to its superior atmospheric corrosion resistance. Actually, weathering steel has often been used in Korea as cladding material. However, the performance of the weathering steel in claddings has not been fully monitored. We conducted a field study on the performance of weathering steels and measured the quantity of corrosion loss on the weathering steel claddings in Korea. Based on the measured corrosion loss and weather (environmental) data, the equation to predict corrosion loss of weathering steels was proposed by using environmental factors in KIHO region in Korea. The proposed equation predicted very well the real corrosion losses of KIHO region.

• Journal of Korean Society of Steel Construction
• /
• v.19 no.1
• /
• pp.79-86
• /
• 2007

The corrosion durability of steel bridge coatings, such as organic and metallic coatings, is often evaluated by field exposure tests, but such tests take from several years to decades to complete. As a potential method for fast corrosion testing, accelerated exposure tests were considered in this study. The S6-cycle accelerated exposure test, specified in the Japanese Industrial Standards (JIS K5621), was carried out on uncoated structural steels for 30, 60, 90, 120 and 150 days, and the resultant weight loss was determined. The weight loss was compared with that obtained from previous field exposure tests, and acceleration factors of the S6-cycle test to field exposure test sites were determined. The application of the S6-cycle accelerated exposure tests to field environments was presented based on the acceleration factor and the amount of flying salt.

• Journal of Korean Society of Steel Construction
• /
• v.22 no.5
• /
• pp.399-409
• /
• 2010

Steel structures are threatened to reduce load-carrying capacity as the cross section is decreased by corrosion. However, there has been no method in definitely evaluating residual load-carrying capacity and the effect of corrosion to the load-carrying capacity of steel. This study evaluated tensile residual load-carrying capacity of corroded steel plates by using tensile tests of specimens, which were selected from the web of temporary structure's main beam. After the surface shapes were measured and tensile tests were examined, the rust of 21 corroded specimens was, first of all, removed using a chemical method. From the tensile test result, which of reference specimens that was picked off at the flange of the same main 13-mm-thick beam and corroded specimens were based, surface geometry and correlation with the reduction of corroded thickness and strain, yield strength or tensile strength was established as constant numbers. Effective thickness of corroded steel with irregular cross sections could be calculated using average residual thickness and standard deviation. The irregular cross sections could be the evaluated tensile strength that is equalized to non-corroded uniform steel's regardless of corrosion. Also, reasonable measuring intervals of residual thickness could be proposed by using this result to apply for executive work.

• Journal of Korean Society of Steel Construction
• /
• v.29 no.3
• /
• pp.193-204
• /
• 2017

Fatigue strength of temporary steels and painted structural steels corroded under outdoor atmospheric environments is not clear. In this study, fatigue tests were carried out on steel plates which were cut off from 7-year-old temporary structural member under subway construction environment and from 75-year-old Yeongdo bridge member under marine atmospheric environment. After removing corrosion production on the steel surface, 3-dimensional surface geometry of the corroded steel was measured at intervals of $1.0{\times}1.0mm$, and corrosion characteristics such as minimum, maximum and mean values of residual thicknesses were calculated. From the fatigue test and FEM analysis results, the relationship between corrosion characteristics and fatigue behavior was presented, and change in fatigue strength of the unpainted and painted steels corroded in outdoor environments was also presented.