• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.34 no.4
• /
• pp.199-204
• /
• 2021

In this study, an isogoemetric analysis (IGA) method that uses NURBS (Non-Uniform Rational B-Spline) basis functions in computer-aided design (CAD) systems is employed to account for the geometric exactness of curved electrodes constituting an electro-adhesive pad in electrostatic problems. The IGA is advantageous for obtaining precise normal vectors when computing the electro-adhesive forces on curved surfaces. By performing parametric studies using numerical examples, we demonstrate the superior performance of the curved electrodes, which is attributed to the increase in the normal component of the electro-adhesive forces. In addition, concave curved electrodes exhibit better performance than their convex counterparts.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.16 no.6
• /
• pp.1213-1222
• /
• 2021

This study is a digitalization study based on ICT technology as part of the development of innovative technologies in the new energy industry as a 2050 carbon-neutral policy. It is the development of an oneM2M-based IoT server platform that can be integrated and managed in conjunction with the external interface of each energy facility. It analyzes KEPCO's e-IoT standard specifications through the Power Research Institute's 'SPIN' and develops representative standards, LWM2M and oneM gateway platforms. OneM2M secures and analyzes the recently announced standard for Release 2 instead of the existing Release 1. In addition, the e-IoT standard oneM2M platform is developed based on R2. In addition, it selects the specifications for e-IoT gateway devices that can sufficiently implement KEPCO's e-IoT standards. In addition, a technology and system for developing a high-performance gateway device that considers future scalability were proposed.

• Journal of the Korean Applied Science and Technology
• /
• v.39 no.1
• /
• pp.10-17
• /
• 2022

This study attempted to investigate the antioxidant capacity and whitening effects of the extract from the mixture of 7 different vegan cosmetic ingredients. To examine radical scavenging capacity, DPPH, ABTS and FRAP assays were performed. In addition, polyphenol and flavonoid concentrations were measured to check antioxidant substances. Specifically, in a DPPH test, 105.74 mg ascorbic acid/g antioxidant capacity was observed. In an ABTS assay, 85.31 mg ascorbic acid/g antioxidant capacity was found. Lastly, in an FRAP assay, 1mg of the extract revealed ascorbic acid 198.01±5.50 ㎍ reducing power. Polyphenol and flavonoid concentrations were 30.19±0.75 mg/g and 9.12±0.36 mg/g respectively. In a cell-based assay, cytotoxicity and whitening activity were examined. In terms of cytotoxicity, '20% or less' was observed. Furthermore, the inhibition of melanin synthesis was '34.70±2.97%' at 100 ㎍/mL, confirming the possibility of the extract from the mixture of 7 different substances as a cosmetic ingredient.

• Journal of Korea Foundry Society
• /
• v.41 no.6
• /
• pp.516-520
• /
• 2021

During sand casting, the binders produces gases in cores because high temperature molten metals dissolve the binders into gases and causes gas defects in the casting products. In the present study, quantitative analysis of inorganic binder gas generation was performed using Thermo Gravimetry (TG) and Mass Spectrometer (MS) analyses. The specimen was prepared using organic binders in liquid and solid state, and a mixture of sand and binders. Moisture loss by catalysts was calculated by TG results from liquid and solid binder specimens; it was found that components of gases were different. Quantitative analysis was discussed for generated gases with individual gas component results obtained using TG and MS. It is expected that gas generation can be predicted in the casting simulation using the technique proposed in the present study.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.20 no.6
• /
• pp.110-116
• /
• 2021

W3C enacted RDF(Resource Description Framework based DCAT meta data standard, which is world-widely accepted so far. To guarantee the inter-operability and integrity of data from various sources and even from various countries, it is considered that transportation meta data should also follow the DCAT standard. But still, to represent the transportation domain-specific features, it is necessary to define new properties and vocabularies in addition to the DCAT standard. This research identified the additional properties and vocabularies for transportation metadata, considering uniqueness of transportation data. The revised RDF schema and RDF graph proposed in this research should be able to lead the transportation open data platform revitalization.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.57 no.4
• /
• pp.334-341
• /
• 2021

The fishery compensation by marine spatial planning such as routeing of ships and offshore wind farms is required objective data on whether fishing vessels are engaged in a target area. There has still been no research that calculated the number of fishing operation days scientifically. This study proposes a novel method for calculating the number of fishing operation days using the fishing trajectory data when investigating fishery compensation in marine spatial planning areas. It was calculated by multiplying the average reporting interval of trajectory data, the number of collected data, the status weighting factor, and the weighting factor for fishery compensation according to the location of each fishing vessel. In particular, the number of fishing operation days for the compensation of driftnet fishery was considered the daily average number of large vessels from the port and the fishery loss hours for avoiding collisions with them. The target area for applying the proposed method is the routeing area of ships of Jeju outer port. The yearly average fishing operation days were calculated from three years of data from 2017 to 2019. As a result of the study, the yearly average fishing operation days for the compensation of each fishing village fraternity varied from 0.0 to 39.0 days. The proposed method can be used for fishery compensation as an objective indicator in various marine spatial planning areas.

• Textile Coloration and Finishing
• /
• v.34 no.3
• /
• pp.157-164
• /
• 2022

This study tried to analyze the heat resistance properties by blending epoxy and phenolic resin in a certain ratio, and to analyze the adhesive properties at the time of metal-polymer hetero-adhesion by applying Epoxy-phenolic resin between a silicon steel sheet and m-aramid sheet, the viscosity, adhesive peel strength, and adhesive cross section were measured using a rotational rheometer, a tensile tester(UTM), and a field emission scanning electron microscopy(FE-SEM). The thermal stability and heat resistance were confirmed by measuring the mass loss according to the temperature increase using Thermogravimetric analysis(TGA). After blending with epoxy and Phenolic resin(1:0.25 ratio) curing at 110℃ for 10 min, high adhesive strength was improved more than 40% compared to the adhesive strength using epoxy alone. When the space between the silicon steel sheet and m-aramid sheet, which is created during curing of the E-P blend, is cured with a slight weight, it is possible to control the empty space and improve adhesion.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.22 no.4
• /
• pp.42-48
• /
• 2021

Recently, the defense industry has been improving high technology by developing convergence technology through the 4th industrial revolution. On the other hand, it is very difficult to guarantee the performance of high-tech weapon systems because the test for weapon systems has many risks and cannot perform in an actual operating environment. Therefore, M&S resources are needed to make sound weapon systems, but many people demand reliable M&S resources. Owing to the continuous demand and execution of the VV&A work, related rules have developed significantly, but tools and techniques for performing the work have not been developed. Hence, there are inefficient parts in the performance of work due to the absence of a systematic system. Accordingly, many risks may cause various safety accidents, such as security. This paper suggests a direction for the development of VV&A work procedures by improving efficiency and reducing risk.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.25 no.4
• /
• pp.37-45
• /
• 2021

This paper is a basic study to evaluate the possibility of earthquake-resistant reinforcement by reinforcing engineered cementitious composite in masonry members. In order to examine the performance according to the fiber mixing rate of the engineered cementitious composite, a test specimen was prepared according to the formulation design, and flow ability, compressive strength, flexural strength, length change rate, and direct tensile strain were measured. In addition, non-reinforced masonry members, masonry members reinforced with engineered cementitious composite, and masonry members in which glass fibers and wire mesh were separately reinforced with engineered cementitious composites were manufactured, and flexural strength and maximum displacement were measured. All specimens reinforced with engineered cementitious composite showed more than 16 times the effect of maximal strength compared to that of no reinforcement, and as a result of examining the crack shape, the energy dissipation ability was excellent, confirming the possibility of seismic reinforcement.

• The Journal of Engineering Geology
• /
• v.32 no.2
• /
• pp.271-280
• /
• 2022

Landfast sea ice forms near coastlines in polar regions. Continuous monitoring of this sea ice is important, as it plays a key role in the marine ecosystem and affects the operation of nearby research stations. This study detected landfast sea ice around Jang Bogo research station in East Antarctica by stacking interferometric coherence images of Sentinel-1 synthetic aperture radar (SAR) data with 6-, 12- and 18-day temporal baselines. A total of 50 landfast sea ice maps were generated covering July 2017 to June 2018. The time series revealed regional differences in the timing of the maximum extent as well as growth rate of landfast sea ice. Overall, detecting landfast sea ice using interferometric SAR coherence seems promisingly feasible; however, limitations remain owing to low backscattering coefficients from new and smooth sea ice surfaces and subtle movements of sea ice in contact with the Campbell Glacier Tongue.