• Journal of the Korean Geotechnical Society
• /
• v.19 no.4
• /
• pp.43-53
• /
• 2003

To get improved soil parameters in the laboratory tests, the effects of sample disturbance should be excluded as much as possible. A collaborative research between Dong-A University and PHRI (Japan) was conducted to investigate the effects of sample disturbance due to sampling techniques and samplers on Pusan clays. The results of unconfined compression and consolidation tests performed on the clay samples taken by them have been compared in terms of soil parameters and sample disturbance. As the result of the study, it was found that when the Korean sampler was used with a different technique of cleaning the borehole bottom and removing slime before inserting and penetrating the sampler tube, similar to the one commonly used in Japanese practice, the quality of samples could be greatly improved. Furthermore, the CRS test with the rate of 0.02%/min yielded larger values of consolidation parameters and better degree of sample disturbance than those of oedometer test, due to the difference in testing method.

• Journal of the Korean GEO-environmental Society
• /
• v.22 no.9
• /
• pp.5-16
• /
• 2021

In this study, piezocone coefficients of clays (Hwasung, Gunsan, Changwon, Busan) were analyzed from piezocone penetration tests those accompanied with vane shear and UU tests. Piezocone coefficients of west sea clays (Hwasung, Gunsan), i.e, N_kt is 12.6 and N_qu is 8.8, while those of south sea clays are 16.5 and 9.2 respectively. The difference of liquid limit between south and west clays causes main roles those which west sea clay is generally lower than 50%, i.e, CL, and liquid limit of south sea clay is mostly higher than 50%, i.e CH. Piezocone coefficients obtained from several tests show similar trends even though they still have some differences depending on each test. However, they show clear differences depending on liquid limit. Therefore, piezocone coefficients need to be used with caution depending on LL.

• Journal of the Korean Geotechnical Society
• /
• v.23 no.8
• /
• pp.77-85
• /
• 2007

In order to estimate undrained shear strength and evaluate cone factors, various in-situ and laboratory test results at new harbor construction area near Pusan were analyzed. To evaluate Nk values and equation applicable in Korea, measured and theoretical cone factors were compared based on the test results. For comparison, various analytical solutions were adopted and used. Adopted methods include cavity expansion solutions of Baligh (1975) and Yu (1993) and steady state solutions of Teh and Houlsby (1991) and Yu et al. (2000). According to the result of comparison, cavity expansion solutions were found to be reasonable for the CPTu-based undrained shear strength evaluation.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.1
• /
• pp.217-223
• /
• 2019

In this study, the acceleration changes of the surrounding ground when crushed stones were installed in a strip-type were analyzed using the 1-G shaking table test. The ground was constructed from clay, and the foundation was installed using crushed stone of strip-type form. The response acceleration and response spectrum for various input seismic motions were analyzed. The change in acceleration was examined according to the adjacent distance to the strip-type crushed stone foundation. In the Hachinohe seismic motion results, there was no significant decrease in acceleration, but the maximum response acceleration for the two seismic motions was inversely proportional to the distance from the crushed stone foundation. As a result of the response spectrum analysis, the attenuation period in the long period and the short period input wave were different from each other, and the change in response spectrum affected the maximum acceleration value. As the distance from the crushed stone foundation was increased, the attenuation was larger in the period between 0.08 and 0.5 sec in the Hachinohe seismic motion, the attenuation was larger in the period of less than 0.2 seconds in the Northridge seismic motion.

• Journal of the Korean Geotechnical Society
• /
• v.24 no.11
• /
• pp.35-41
• /
• 2008

Stone columns, one of the soft ground improvement techniques, are being used for not only accelerating consolidation but also increasing bearing capacity of soft grounds. In this study, in order to observe the stress distribution characteristics which are one of the important factors to estimate the settlement reduction of the soft ground, lab-scale experiments were performed in stone column reinforced clay ground. The stress distribution ratio of stone column decreased with the lapse of time after surcharge loading but increased as the stiffness of clay deposit increases. It shows that the modified Baumann and Bauer's solution, which is able to easily predict the stress distribution ratio of stone column reinforced soft ground, exhibits reasonable agreement with the measured data.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.7 no.4
• /
• pp.658-664
• /
• 1997

The effect of metal oxides($K_2O, MgO, CaO,Al_2O_3$, and $TiO_2$) on the kinds of pure $SiO_2$ phase, and $SiO_2$ phases in the composition of vitreous porcelain body was investigated. Also, the effect of the ratio $SiO_2$ to $Al_2O_3$ in the composition of porcelain body with stabilized of cristobalite phase was investigated. In the case of the addition of $K_2O, MgO, CaO, Al_2O_3$, and $TiO_2$ to pure $SiO_2$, the major phase was $\alpha$-cristobalite, $\alpha$-cristobalite, $\alpha$-quartz, $\alpha$-quartz and amorphous, respectively. As the ratio of $SiO_2$ to $Al_2O_3$ in the composition of porcelain body was decreased, the stabilization of cristobalite phase was promoted and only the critical value of $SiO_2/Al_2O_3$ ratio that stabilizing the cristobalite phase in it was 68.10/22.75. The addition of $K_2$O, MgO, CaO,Al_2O_3$, and $TiO_2$ to the composition of porcelain body stabilized already did not affect on the formation of $\alpha$-cristobalite phase which degraded the thermal properties of porcelain body, and suppressed the formation of a, $\beta$-cristobalite.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2000.11a
• /
• pp.391-398
• /
• 2000

The index properties of cohesive soils play an important role to examine entire tendency of soil properties. Especially, the Atterberg limits have a good correlation with compression and shear strength of cohesive soils. However, these values strongly depend on their testing methods. In this study, for Pusan clays the Atterberg limits were peformed under different conditions; for example, four kinds of specimen preparation, two kinds of testing equipment, and four kinds of estimating method. And a laboratory vane test was peformed to compare the undrained shear strength with that of the fall cone test. As experimental results, the value of liquid limit performed for oven-dried sample, followed in ASTM D4318, underestimated by about 10% compared to those of another three methods, irrespective to the used equipments. But the value of plastic limit was not influenced by sample preparation methods and equipments. The liquid limits by one-point methods(Leroueil et al., 1996; Nagaraj et al., 1981) were agreed well with those of different methods. Finally, the undrained shear strength by laboratory vane test was relatively larger than that of fall cone test, and the relationship between both showed a bad trend.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2009.09a
• /
• pp.1141-1146
• /
• 2009

The compressibility of clay has been expressed e-log p' graph. In natural clay, e-log p' graph are changed by deposition condition and chemical cementation as well as Atterberg limits, whereas in reconstituted clay, it is generally known that e-log p’ curve is varied with Atterberg limits. However, e-log p' graph is possible to change according to the reconstituting methods and test conditions. In this study, consolidation tests are performed as various test condition for reconstituted Busan clay. Test results show that the relationship e/$e_L$ and log p' is almost constant with $e_L$. And the compression index obtained from slurry method sample is larger than one obtained from kneading method sample. Intrinsic compression line (ICL) of Busan clay is identical with ICL suggested by Burland.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2016.05a
• /
• pp.223-223
• /
• 2016

수문 순환과 물 수지에 관한 연구는 강수량, 지표유출량, 지하수, 토양수분 및 증발산량 등에 대한 관측이 이루어질 때 실제로 규명될 수 있다. 특히 국내 지형의 대부분을 차지하고 있는 산림 사면에서 토양수분량 측정은 물순환을 이해하는데 중요한 것으로 판단된다. 본 연구는 국토교통부의 기초수문자료 구축사업의 일환으로 수행되고 있으며, 수문자료의 다양화 목적을 가지고 TDR(Time Domain Reflectometry, TDR) 장비를 이용하여 2시간 간격으로 2015년 3월부터 12월까지 측정을 수행하였다. 관측지점은 경기도 파주시 적성면 설마리의 설마천 유역 내에 위치한 감악산내 범륜사 주변 사면과, 충청북도 음성군의 청미천 유역내의 수레의산 산지 사면에서 수행하였다. 관측소에서 측정된 토양수분량 자료는 토양수분량의 시공간적 분포 특성을 파악하기 위해 토양수분량의 통계분석(평균, 표준편차, 변동계수)를 수행하였다. 설마천유역의 설마천 관측소에서는 2015년 강수량이 적어 2014년의 토양수분량 평균값보다 낮게 측정되었다(평균 12.96%, 표준편차 2.2%). 청미천유역의 청미천 관측소에서도 설마천관측소와 마찬가지로 과거보다 적은 강수량이 발생하였지만, 설마천 관측소와는 다르게 안정적인 토양수분 평균값을 유지하는 것은 설마천 관측소 보다 토양층이 발달하고 토성의 점토 함량이 상대적으로 높기 때문으로 보인다. 청미천 관측소의 토양수분량은 평균 24.3%, 표준 편차 1.7%로 나타났다.

• Journal of the Korean GEO-environmental Society
• /
• v.11 no.7
• /
• pp.33-43
• /
• 2010

The physical characteristics of the marine clay in the Korean Peninsula, specifically Pusan areas of the south coast of Korea, were previously studied and reliable data from harbor construction projects were used for the relationship analysis of geotechnical strength parameters. The sample of marine clay classified to ML, MH, CL, CH and ML-CL from USCS were included for the analysis while the samples classified to SC were excluded in order to raise the degree of data analysis. Geotechnical strength properties, such as undrained shear strength, sensitivity ratio, and effective friction angle were analyzed and evaluated using the data obtained from unconfined compression test, triaxial compression test and field vane test. Abnormal values were extracted through statistical analysis. Moreover, the reliability of the results was improved by performing the evaluation of disturbance. Linear regression analysis was used for the relationship analysis, between undrained shear strength and depth. The relationship equation between undrained shear strength and depth was derived from the analysis of unconfined and triaxial compression test data of samples obtained at same location. Consequently, The relationship between depth and undrained shear strength is $S_u=0.015148D+0.04624$ and the undrained shear strength derived from the triaxial compression test was estimated to be about 1.26 of derived from the unconfined compression test.