• Proceedings of the Korea Electromagnetic Engineering Society Conference
• /
• 2000.11a
• /
• pp.7-11
• /
• 2000

본 논문에서는 불완전 동기(Imperfect Synchronization)로 인한 칩 동기 에러(timing errors)와 위상 에러(phase errors)를 고려 하여 비동기(Asynchronous) DS-CDMA 시스템의 성능을 이론적으로 분석하였다. 성능 개선 기법으로는 다단 간섭제거기 (Multistage PIC)와 부분 다단 간섭제거기(Partial Multistage PIC)를 채용하였고 칩 동기 에러와 위상 에러가 두 간섭제거기의 간섭제거능력에 미치는 영향의 정도를 정량적으로 분석하였다. 성능분석 결과로부터 칩 동기 에러와 위상 에러로 인한 1단(no cancellation)에서의 성능 열화가 각 단의 상관기 출력(decision statistic)에 영향을 줌으로써 다단 간섭제거기와 부분 다단 간섭제거기의 성능 개선폭을 감소시켰다. 그렇지만, 불완전 동기에도 불구하고 단(stage) 수가 증가할수록 두 간섭제거기 모두 강한 간섭제거능력을 보였다. 실제 시스템에서는 성능 개선과 구현상의 복잡도를 동시에 고려해야하므로 다단 간섭제거기 보다 구조가 간단하고 계산량이 적은 부분 다단 간섭제거기의 활용도가 높아질 것이 예상된다.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.48 no.8
• /
• pp.7-14
• /
• 2011

In this paper we studied a conventional system and propose a new decoding scheme for Space-time Frequency Code with Interleaved System. We also addressed the quasi orthogonal function with Jacket matrices in modern 3GPP LTE uplinked advance system. We also introduce the Partial Interference Cancellation (PIC) group decoding which provides a framework to adjust the complexity-performance tradeoff by choosing the sizes of the information symbols groups.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.12 no.1
• /
• pp.1-10
• /
• 2001

In this paper, a multistage parallel interference canceller (MPIC) and a partial multistage parallel interference canceller (PMPIC) are employed as a technique for improving the performance of the asynchronous DS-CDMA systems. The degree of the effect of the timing errors and phase errors on the interference cancellation capability of two types of cancellers is theoretically analyzed and the computer simulation is performed to confirm the analytical results. From the results, the large performance improvement is obtained by employing MPIC and PMPIC with perfect synchronization over the conventional matched filter, and the performance improvement obtained by MPIC and PMPIC is very close to each other as the number of the stage of MPIC and PMPIC increases. When the timing errors and phase errors are considered (in the case of imperfect synchronization), the performance improvement reduces as the performance degradation at the first stage (no cancellation) has a bad effect on the decision statistics at each stage. However MPIC and PMPIC have the strong interference cancellation capability in spite of imperfect synchronization as the number of the stage increases. An interference canceller, which has the strong interference cancellation capability as well as lower complexity for the implementation, is needed for practical systems with timing errors and phase errors because the perfect synchronization is impossible. Therefore, the excellent tradeoff between complexity and performance offered by PMPIC makes it an attractive approach for practical systems.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.31 no.2C
• /
• pp.184-190
• /
• 2006

In this paper, we propose the blind multiuser detector which is robust against the effects of near-far and multiuser interference. The proposed detector is composed of the partial IC(interference canceller) and the blind MOE(minimum output energy) multiuser detector. The partial IC partially eliminates interference components from the received signal then the output of partial IC is fed into the input of multiuser detector. Simulation results show that the proposed detector has the robust property but the performance of conventional MOE multiuser detector is rapidly degraded in case of existing both near far and multiuser. Thus, the proposed partial IC BMUD(blind multiuser detection) technique has better performance than the conventional MOE.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.36 no.2C
• /
• pp.112-118
• /
• 2011

In this paper, we conduct an objective performance analysis of the crosstalk cancellation scheme studied in [11]. While the conventional scheme is only applicable to a listener on the optimal listenable region (sweetspot), the space skew/crosstalk cancellation (SS/CC) scheme in [11] can mitigate crosstalk regardless of the listener's position by using listener position tracking (LPT) system. The SS/CC scheme is composed of two parts: LPT-based SS and CC parts. In this paper, the SS/CC scheme is evaluated by some criteria such as follows: condition number, and the balance characteristic, its root mean square error, and running average.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.31 no.1C
• /
• pp.102-108
• /
• 2006

In this paper, we propose an interference cancellation(IC) scheme using a partial Rake(PRAKE) combining in ultra-wideband(UWB) multipath fading channels. In this IC scheme, differently from the conventional transmitter model, which employs a guard interval between each frame, the guard interval is employed between each slot for estimating the multiple access interference(MAI). The UWB systems using the proposed IC scheme have little performance degradation without regard to the number of user, while the conventional UWB systems have a significant performance degradation according to the number of user. In order to reduce the receiver complexity, the PRAKE combining of post-canceled signal and the partial user IC scheme are also proposed.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.41 no.11
• /
• pp.9-15
• /
• 2004

We propose optimal interference rejection weight for multistage parallel nulling (MPN) partial parallel interference cancellation (PPIC) receiver previously proposed to enhance the performance of V-BLAST for downlink multiple-input multiple-output (MIMO) multicarrier (MC)-code division multiple access (CDMA) systems. MPN-PPIC method proposed in [1] was based on the parallel interference cancellation (PIC) with fixed interference rejection weight obtained experimentally. However, the fixed weight can not be adapted to various systems efficiently, thus we proposed method for the optimal interference rejection weight based on the received signal to interference and noise ratio (SINR), and the performance of the proposed method was evaluated through computer simulation comparing with the previous method. We obtained performance gains of 2.5 dB ~ 5 dB for BER of 10$^{-3}$ .

• Journal of Satellite, Information and Communications
• /
• v.10 no.4
• /
• pp.101-106
• /
• 2015

In this paper, a shared band transmission, in which downlink signals from satellite to both earth station and user terminal are transmitted in the same frequency band, is considered. For proper operation of such shared band transmission, self-interference caused by the transmitted signal from its own transmitter should be cancelled and the desired signal from the other transmitter should be obtained. The self-interference is sent by its own transmitter and it can be easily regenerated with the estimated round-trip delay. In addition to this delay, non-linearity effects caused by power amplifiers at the earth station and satellite should be exploited. The proposed interference canceller divided into two parts: one is subtraction of the transmitted signal with delay and non-linearity effects, and the other is adoptive filter to suppressed the residual interference. Through computer simulations, the effectiveness of the proposed system is verified.

• The Journal of the Acoustical Society of Korea
• /
• v.27 no.1
• /
• pp.40-46
• /
• 2008

Weak target detection and localization in the presence of loud surface ship noise is a critical problem for matched field processing (MFP) in shallow water. For stationary sources, each signal component of received signal can be separated and interference can be suppressed using eigen space analysis schemes. However, source motion, in realistic cases, causes spreading of signal energies in their subspace. In this case, eigenvalues of target and interfere signal components are mixed and hard to be separated with usual phone space eigenvector decomposition (EVD) approaches. Our technique is based on mode space and utilizes the difference in their physical characteristics of surface and submerged sources. Performing EVD for modal cross spectral density matrix, interference components in the mode amplitude subspace can be classified and eliminated. This technique is demonstrated with synthetic data, and results are discussed.

• Korean Journal of Optics and Photonics
• /
• v.20 no.1
• /
• pp.23-28
• /
• 2009

In this study, we propose an image stitching method for large-area holographic photo lithography. In this method, a hologram medium become a hologram mask for lithography. And the mask has information for stitched images. These images are recorded by signal images which are controlled with DMD (digital micro-mirror device), and serial hologram recording is achieved with a motorized linear stage. Using this method, fringe seams appear on the stitching area. To remove these fringe seams, double exposure holographic lithography is tried. Each stitched image is recorded and reconstructed with a different reference beam. The experiments confirm that fringe seams are removed.