• Applied Chemistry for Engineering
• /
• v.18 no.5
• /
• pp.444-448
• /
• 2007

The effects of intra-particle composition on the adhesive properties and water dispersity of acrylic emulsion type pressure sensitive adhesives (PSAs) were investigated. In the case of PSA having uniform intra-particle composition, the higher holding strength made the water dispersity lower. By changing the intra-particle composition in hard core/soft shell type, however, it was possible to get PSAs showing both high holding strength and water dispersity. When the weight ratio of MAA/AA is 4/1, high holding strength, but low initial tack and very low water dispersity were observed in both cases of higher contents of (AA+MAA) in core and shell area. When the weight ratio of MAA/AA is 1/4, however, higher water dispersity and lower holding strength were indicated in the case of higher contents of (AA+MAA) in shell area.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2023.05a
• /
• pp.85-86
• /
• 2023

This study confirmed the improvement of the Composite Waterproof Method in which the sheet layer is partially attached with perforated film and the joint is FRP-treated.

• Proceedings of the Korean Society of Coastal and Ocean Engineers Conference
• /
• 1992.08a
• /
• pp.188-191
• /
• 1992

최근 해양공간의 이용 및 개발과 관련해서 하구역이나 연안해역의 개발이 활발하게 진행됨에 따라 연안해양환경의 예측과 제어에 관한 기술 개발이 중요한 과제로 대두되고 있다. 하구역이나 연안해역에 분포하는 물질 가운데 상당부분이 점토나 실트와 같은 점착성토사와 유기성 현탁입자로 구성되어 있다.(중략)

• Polymer(Korea)
• /
• v.37 no.4
• /
• pp.547-552
• /
• 2013

Polyimide (PI) containing carboxyl functional group was prepared and reacted with diaminosiloxane during high temperature film casting. The morphology of resulting film was observed by using transmission electron microscopy (TEM) and energy dispersive X-ray spectroscopy (EDX), which revealed that globular 100 nm-sized PI domains and continuous polysiloxane phase were formed. X-ray photoelectron spectroscopy (XPS) study indicated that air-film interface mainly consisted of polysiloxane blocks. Poly(imidesiloxane) thin layer was thermostable until $400^{\circ}C$ and its pressure- sensitive adhesive property was retained up to $300^{\circ}C$. The comparative experiments revealed that grafting between carboxyl groups of polyimide and aminosiloxane was crucial for formation of microdomain structure and pressure-sensitive adhesive property.

• Journal of the Korea Institute of Building Construction
• /
• v.21 no.4
• /
• pp.377-386
• /
• 2021

In April 2019, this study was enacted as a test method for the performance of waterproof layers in an environment where complex deterioration and structural behavior are simultaneously applied, but some existing standards were implemented to point out the errors of the method that should be supplemented. Thus, in establishing standards for (tentative) adhesive waterproofing sheets, field workability and quantification of test results were studied on the structural behavior response performance test methods included as test items. In addition, the performance evaluation of adhesive-type composite waterproof sheets was conducted based on the considered contents to review improvements such as applicability as an item of standard standards and field workability related problems.

• Journal of the Mineralogical Society of Korea
• /
• v.28 no.2
• /
• pp.109-126
• /
• 2015

Because fault gouge developed at the center of fault is recognized as one of the most important weak sites, it is evident that clay mineralogy and physical properties greatly affect the rock stability. The purpose of this study is to establish the relationship of mineralogy and physical factors that control rock stability in fault zones. We analyzed a total of 51 samples from 16 main faults which were selected from a Korea fracture map, using XRD, SEM, and physical analyses like unit weight, friction and cohesion properties. Though it is considered that the most common clay minerals comprising fault gouge are kaolinite, illite and smectite, clay mineralogy slightly varies depending on lithology: illite > smectite > kaolinite and chlorite in volcanic rocks, kaolinite and chlorite > illite > smectite in sedimentary rocks, and illite > smectite > kaolinite and chlorite in abundance, respectively. Friction angle decreases with increasing clay content. Cohesion increases with increasing clay content below the 45 % region while it decreases with increasing clay content at the region higher than 45%, with some scatters in the data. It is likely that these results are ascribed to the physical heterogeneity of fault gouges with varying content of different clay minerals.

• Korean Journal of Food Science and Technology
• /
• v.36 no.6
• /
• pp.959-967
• /
• 2004

To screen probiotic lactic acid bacteria with potent adhesive property on human colonic mucosa, colonic mucin-binding assay was introduced. This colonic mucin-binding assay actually measures the binding activity of surface lectin-like protein (SLP) on colonic mucin, and the optimal conditions were examined. The optimal pH for colonic mucin coating on plate wells was 4.8, and ${\times}24,000$ diluted solution of commercially available horseradish peroxidase (HRP) conjugated streptoavidin yielded good results, for rapid screening, $5.0\;{\mu}g/mL$ of biotinylated SLP from lactic acid bacteria was optimal, and optimal scintillation time of 3,3',5,5'-tetramethyl benzidine (TMB) was 10 min. These conditions were useful for both rapid selection and quantitative analysis of lactic acid bacteria that have high adhesion property to human intestinal tract. Among 50 strains of lactic acid bacteria, including 32 type culture strains and 18 isolated strains from infant feces, Lactobacillus species FSB-1 isolated from kimchi showed the highest binding activity to colonic mucin. From taxonomical viewpoints based on morphological study, physico-biochemical study, partial 16S rDNA seguencing, and phylogenetic analysis, L. species FSB-1 was identified as Lactobacillus brevis.

• Elastomers and Composites
• /
• v.34 no.4
• /
• pp.360-365
• /
• 1999

In this study, the blends of acrylic quaternary polymer (PEBEV) which was co- polymerized from 2-ethylhexyl acrylate (2-EHA), n-butyl acrylate (BA) and ethyl acrylate (EA), vinyl acetate (VAc), and poly(vinyl chloride-co-vinyl propionate) (PVCVP) were prepared by solution blending. Pressure sensitive adhesive (PSA) properties of PEBEV/PVCVP blends were compared with those of PEBEV/poly(vinyl chloride-co-vinyl acetate) (PVCVAc) blends. Compatibility of PEBEV/PVCVP was better than that of PEBEV/PVCVAc. Tackiness of both blend systems were similar, but holding power began to decrease at 15wt% or higher PVCVAc contents in PEBEV/PVCVAc blends. On the other hands, holding power of PEBEV/PVCVP increased as the contents of PVCVP increased. Failure modes of the blends were adhesive failure except 5wt% of PVCVP was blended.

• Journal of the Korean Geotechnical Society
• /
• v.37 no.7
• /
• pp.5-12
• /
• 2021

When drilling investigations for Rock Slopes are not possible, it is often difficult to calculate the Ground Design Constants required for the Limit Equilibrium Analysis. Therefore, the outcrops or partially cutted Rock Slopes were analysed using JRC and JCS that can be easily and conveniently measured. In particular, the effect of the JRC on the Safety Factor or the Rock Slopes was analyzed intensively, and the results were presented as a relationship formula and Table. When the Rock slope was stable, the JRC increased by an average of 9.0% as the slope height increased, and increased by an average of 29.8% as the slope angle increased. JRC was more sensitive to slope angle changes. The Cohesion corresponding to JRC was calculated from JRC-Fs formula. JRC and Cohesion showed a nonlinear relationship, and the Cohesion was about 8.0% more sensitive to slope height changes than slope angle changes.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.35 no.3
• /
• pp.599-606
• /
• 2015

Damage of landslide due to earthquake covers a considerable part of total damage due to earthquake. Landslide due to earthquake affects direct damage of human lives and structures, and social system can be paralyzed by losing functions of roads, basic industries, and so on. Therefore, systematic and specialized research examining the factors affecting the slope stability by earthquakes should be needed. However, method of evaluation of slope stability problems due to earthquake contains somewhat uncertainty since many soil properties are predicted or assumed. In this study, influences of change of soil properties such as degree of saturation and cohesion value are analyzed in factor of safety and displacement using seismic landslide hazard maps based on GIS. As the degree of saturation increases or cohesion decreases, it is found that seismic landslide hazard area marked with factors of safety or displacements tends to increase. Therefore, to draw more exact landslide hazard map during earthquake, it is necessary to obtain accurate soil property information preferentially from site investigation data in the field.