• Journal of Korean Society of Forest Science
• /
• v.84 no.4
• /
• pp.525-535
• /
• 1995

The western-style industrial forest management practice involving large scale clearcutting, silviculture with industrially desirable species, and inadequate consideration on ecosystem preservation, has faced severe criticisms from environmentalists, ecologists and conservationists. With an increasing concern about environmental degradation the general public has also been becoming vocal in demanding ecologically sound alternative forest management. An age-old practice of sustainable ecosystem management variously defined as community forestry, social forestry or homestead forestry, has received increased attention in recent days. This type of traditional, and often not very organized method of natural resource management has been practised in many countries from the prehistoric times. It is believed that with a clear understanding of the functioning of ecosystem and community needs, the existing landuse method can be developed into a more productive one. The nature of community forestry management will vary depending on the scale, geographical location, social/community structure and expectations. This article argues that although the rate of economic growth may be lower with community forestry than with industrial forestry, the former fosters the principle of ecosystem sustainability. Industrial forestry may have an initial high growth rate but often it is associated with unsustainable harvesting leading to ecosystem degradation. A review of the traditional methods of economic analyses shows that they do not take into account the many social and environmental costs associated with forestry. It is argued that a well managed community forestry can maintain the critical balance between economic and ecosystem sustainability. An integrated model of community/homestead forestry development is proposed by coordinating the extension services of the departments of agriculture, forestry and environment.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.9 no.2
• /
• pp.43-54
• /
• 1989

In this paper, measured and calculated responses are compared in order to give how the static and dynamic responses occurred in steel railway bridges due to train loads could be calculated appropriately. From this, it is investigated how the impact factors are varied by changing the train speed above 100km/h Field measurement is carried out by the steel strain gages and displacement transducers at the main design points, and then the static and dynamic response, fundamental frequencies, damping ratios and impact factors of the bridges are obtained. Static analysis is done using the computer program developed according to three dimensional matrix structural analysis in which the trains and bridges are modelled as 1,2 and 3 dimensions. Dynamic analysis is done according to 2 approaches, the moving force and mass problem. In moving force problem, the solutions are obtained by the modesuperposition-method and in moving mass problem by the direct integration method. From this study, it is known that in order to obtain the static response in the railway bridges, the bridge could be modelled by 1 or 2 dimension as in the highway bridge, however the response ratio(measured/calculaled) is high comparing to the highway bridges. By the way, the dynamic response should be obtained by the moving mass problem. And by comparing the measured and code specified impact factors, it is known that the factors specified in the present railway bridge code are very safe under the present service speed below 100km/h. However, because the factors become very high under the speed above 100km/h, especially in the simple plate girder bridge, it is thought that the code specification on impact factor should be discussed enough under the rapid transit system.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.12 no.1
• /
• pp.97-105
• /
• 1992

The purpose of this study is to provide the cause and countermeasure for track problems in the high speed railways due to the irregularly increasing dynamic wheel loads running over the speed range of 300 km/h. It has long been recognised that the track problems encountered on high speed railways are associated mainly with vertical dynamic loads which are related to the unsprung mass of vehicles and track irregularities. In addition to these parameters for the estimation of the dynamic wheel load variation, however, the dynamic characteristics of track structures are discussed in this paper with reference to mathematical modelling of the tracks and vehicle. From the results of the more detailed analyses, the effects of track stiffness and damping characteristics are considered to be significant for reducing the dynamic wheel loads. To make this point clear and appraise the overall performance of the track components, the theoretical analysis on the dynamic behavior of the tracks and wheel set impact tests on several track structures are performed. The experimental results from different track components are compared with each other. The track stiffness and damping characteristics are also presented quantatively.

• Applied Microscopy
• /
• v.35 no.1
• /
• pp.15-22
• /
• 2005

Metallothionein (MT) is a low molecular weight, cysteine-rich, metal-binding, and non-enzymatic protein. The present study was carried out to investigate the expression of MT gene as well as the localization of MT in regenerating rat liver. In partial hepatectomized rats, MT mRNA was detected as early as 1 hr and reached a maximal level by 8 hr after the operation. Thereafter, this level decreased gradually until 24 hr, and it became similar to that of sham control. Meanwhile, time course of MT immunoreactivity using immunogold-labelling revealed that the number of gold particles in hepatocytes increased significantly by 12 hr, but decreased at 48 hr after partial hepatectomy. Ultrastructurally, immunogold particles indicating the presence of MT were distributed in both the cytoplasm and the nucleus of the rat hepatocytes, particularly the particles were distributed at rough endoplasmic reticulum and nucleolus and did not seem to adhere to mitochondria or lysosomes in proliferating hepatocytes. Briefly, high level of MT mRNA expression and the intense immunoreactivity and/or the specific localization of MT was observed during liver regeneration. These results suggest that MT possibly involves hepatocyte proliferation via the storage or the supply of various metal ions in the regenerating rat liver.

• The Journal of the Korea Contents Association
• /
• v.17 no.2
• /
• pp.360-374
• /
• 2017

This study investigates the effects of trust and distrust on intention to purchase in open markets, based on the ideas derived from previous studies such as coexistence of trust and distrust, and two distinct trustees in open markets-intermediary and sellers. Specifically, this study i) proposes a trust-distrust model of intermediary and sellers, ii) explores the transfer of trust and distrust from intermediary to sellers, and iii) discovers the antecedents of trust and distrust. The empirical validation using Partial Least Squares shows three results as follows. First, trust in intermediary positively affects intention to purchase through the mediated impact of trust in sellers. That is, trust in intermediary transfers to trust in sellers. Second, distrust in intermediary negatively affects intention to purchase through the mediated impact of customers' perceived risk. Third, structural assurance and perceived website quality positively affect trust in intermediary. The results of this research have implications for intermediary firms not only to build trust but also to manage distrust level. However, this study could not identify any antecedent of distrust, so further research for these antecedents will be needed in the future.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.23 no.4
• /
• pp.393-399
• /
• 2017

In a reciprocating compressor, the piston and connecting rod are important parts. Excess mechanical stress on these parts may cause damage, and broken parts are expensive and difficult to replace. Therefore, it is necessary to analyze the mechanical stress affecting durability and longevity. The main purpose of this study was to identify locations of maximum stress on pistons and connecting rods. Based on dynamic calculation of the working process of a specific air compressor, an analysis of piston and connecting rod performance has been completed. A three-dimensional model for the air compressor's pistons and connecting rods was built separately, and FEM analysis of these components was carried out using a numerical method. The pistons were loaded by pressure which was changed according to crankshaft angle without thermal boundary conditions. The simulation results were used to predict and estimate stress concentration as well as the value of this stress on pistons and connecting rods. The maximum equivalent stress calculated are over 190 MPa on pistons and 123 MPa on connecting rods at crank angle $135^{\circ}$ and $225^{\circ}$ but these are under tensile yield strength. Besides, the calculated safety factors of connecting rods and pistons is higher than 1. Moreover, the results obtained can be used to provide manufacturers with references to optimize the design of pistons and connecting rods for reciprocating compressors.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.15 no.6
• /
• pp.3571-3586
• /
• 2014

This study examined the relationship among PsyCap(positive psychological capital), psychological empowerment, personal creativity and verified the mediated effects of intrinsic motivation in this relationship using the SEM(Structural Equation Model). For this study, the data was collected through on/off-line surveys of members and managers from 12 different enterprises. Among the 418 answers from voluntary participating employees, 332 answers were finally used for statistical analysis. The results were as follows. First, PsyCap had a positive influence on the intrinsic motivation and personal creativity. Second, Psychological Empowerment had a positive influence on intrinsic motivation, but psychological empowerment has no influence on creativity. Third, intrinsic motivation had a meaningful influence by partially mediating PsyCap and personal creativity but completely mediated psychological empowerment and personal creativity. This study focused on intrinsic motivation among the internal factors that have influences on showing personal creativity and has importance in the point that it has suggested the statistical significance by analyzing the psychological/emotional mechanism to reinforce this intrinsic motivation in a positive way. Positive analysis on the relationships among these variables suggests a theoretical meaning on providing a future direction for the study and practical meaning on providing ideas to reinforce the employees' personal creativity. The details of this study are followed in the main text.

• Geophysics and Geophysical Exploration
• /
• v.17 no.3
• /
• pp.129-136
• /
• 2014

Electromagnetic (EM) methods are generally divided into frequency-domain EM (FDEM) and time-domain EM (TDEM) methods, depending on the source waveform. The FDEM and TDEM fields are mathematically related by the Fourier transformation, and the TDEM field can thus be obtained as the Fourier transformation of FDEM data. For modeling in time-domain, we can use fast frequency-domain modeling codes and then convert the results to the time domain with a suitable numerical method. Thus, frequency-to-time transformations are of interest to EM methods, which is generally attained through fast Fourier transform. However, faster frequency-to-time transformation is required for the 3D inversion of TDEM data or for the processing of vast air-borne TDEM data. The diffusion expansion method (DEM) is one of smart frequency-to-time transformation methods. In DEM, the EM field is expanded into a sequence of diffusion functions with a known frequency dependence, but with unknown diffusion-times that must be chosen based on the data to be transformed. Especially, accuracy of DEM is sensitive to the diffusion-time. In this study, we developed a method to determine the optimum range of diffusion-time values, minimizing the RMS error of the frequency-domain data approximated by the diffusion expansion. We confirmed that this method produces accurate results over a wider time range for a homogeneous half-space and two-layered model.

• Korean Journal of Optics and Photonics
• /
• v.23 no.4
• /
• pp.167-171
• /
• 2012

This paper reports on the stray light analysis results of a compact imaging spectrometer (COMIS) for a microsatellite STSAT-3. COMIS images Earth's surface and atmosphere with ground sampling distances of 27 m at the 18~62 spectral bands (0.4 ~ 1.05 ${\mu}m$) for the nadir looking at an altitude of 700 km. COMIS has an imaging telescope and an imaging spectrometer box into which three electronics PCBs are embedded. The telescope images a $27m{\times}28km$ area of Earth surface onto a slit of dimensions $11.8{\mu}m{\times}12.1mm$. This corresponds to a ground sampling distance of 27 m and a swath width of 28 km for nadir looking posture at an altitude of 700 km. Then the optics relays and disperses the slit image onto the detector thereby producing a monochrome image of the entrance slit formed on each row of detector elements. The spectrum of each point in the row is imaged along a detector column. The optical mounts and housing structures are designed in order to prevent stray light from arriving onto the image and so deteriorating the signal to noise ratio (SNR). The stray light analysis, performed by a non-sequential ray tracing software (LightTools) with three dimensional housing and lens modeling, confirms that the ghost and stray light arriving at the detector plane has the relative intensity of ${\sim}10^{-5}$ and furthermore it locates outside the concerned image size i.e. the field of view of the optics.

• Journal of the Korean Geographical Society
• /
• v.49 no.2
• /
• pp.200-220
• /
• 2014

This study reexamines the old concept and reviews prevalent statements on Cenozoic vertical motions of the peninsula that have been uncritically repeated in our academia. The contents of this paper are redefinition of the notion, tilted flexure or warping, and a suggestion for a new time set and properties of the deformation, followed by a new model on its influencing factors and processes. In conclusion, the Cenozoic vertical motion of the Korean peninsula can be reified further with an epeirogenic movement of uplift in the east side-subsidence in the west side of the peninsula since the Neogene (23 Ma). However, the regional boundary for areas of uplift and subsidence is not likely in the Korean peninsula but broader farther to East China and the southern part of Russia. It can be best understood that mantle convection produced by subducting activities in the Western Pacific Subduction Zone causes the uplift and subsidence of earth surface around NE Asia. In addition, faultings in the upper lithosphere induced by in-situ plate boundary stresses accelerate regional uplift in the peninsula since the Quaternary. Controversies that are still standing such as current uplift movements along the western coast of the peninsula during the late Quaternary could be precisely discussed with future research providing detailed information on it.