• Journal of KSNVE
• /
• v.8 no.1
• /
• pp.99-111
• /
• 1998

An analytical method using the substructure synthesis and assumed modes method is developed to investigate the effect of flexibility of bladed disk assembly on vibrational modes of flexible rotor system. In modeling the system, Coriolis forces, gyroscopic moments, and centrifugal stiffening effects are taken into account. Then the coupled vibrations between the shaft and bladed disk are extensively investigated using simplistic models, as the shaft rotational speed and the pretwist and stagger angles of blade are varied.

• Journal of KSNVE
• /
• v.3 no.3
• /
• pp.253-257
• /
• 1993

In this study, vibration analysis of a refrigerator was carried out to reduce vibration induced noise. When the components of a machine are assembled together, the natural frequencies of each component are changed since they have influences on one another. To avoid the problem of resonance, the vibration characteristics of each component must be checked systematically after they are designed. For this purpose, vibration analysis of a refrigerator was done using a component synthesis method. The experimental and analytical results showed good agreement and are presented here.

• Proceedings of the Korean Fiber Society Conference
• /
• 2001.10a
• /
• pp.33-36
• /
• 2001

고흡수성 고분자는 이온성기를 가진 수용성 고분자에 부분적인 가교결합을 도입하여 일반적으로 카르복실기 이온 (-COO-)등과 같은 친수성기를 다량으로 지닌 3차원 망상구조를 지니는 수용성 고분자이다[1]. 여지껏 물을 흡수하는 목적으로 사용된 흡수소재는 면, pulp, sponge 등이 일반적으로 알려져 있다. 이들은 모세관 현상에 의해 물을 흡수하는 것으로 알려져 있으며, 이들 흡수 재료의 흡수능력은 자기 무게의 수백 배로부터 천 배까지의 물도 흡수하며 외압하에서도 잘 탈수되지 않는 고기능성 고분자이며 그 원리는 다음과 같다. (중략)

• Journal of the Korea Concrete Institute
• /
• v.20 no.2
• /
• pp.231-237
• /
• 2008

This study was performed to evaluate joint behavior of prestressed concrete(PSC)-steel mixed girders through the flexural test of 14 beams according to embedded length, amount of reinforcing steel, stud arrangement, and prestressing force. All test beams were failed by turns of desertion of reinforcing steel, stud, and steel plate. From test results, prestressing force was more effective on performance of connection than stud arrangement and reinforcing steel. And the spacing of stud is also more effective than embedding length. This paper also presented 3D nonlinear analysis considering the slip of composite section as well as the static load tests of PSC-steel mixed girders. According to the slip modulus, the nonlinear analysis showed that the behavior of hybrid girders could be divided into three parts as full-composite, partial-composite and non-composite. However, the experimental results showed that the PSC-steel hybrid girders with shear connectors took the part of partial composite action in ultimate load stage. In addition, it was founded that stud shear connectors and welded reinforcements were contributed to improve the ultimate strength of hybrid girders for about 20%.

• Journal of Korea Multimedia Society
• /
• v.15 no.4
• /
• pp.492-500
• /
• 2012

In this paper, improved contour region coding method is proposed to accomplish better depth map coding performance. First of all, in order to use correlation between color video and depth map, a structure in SVC is applied to 3DVC. This can reduce bit-rate of the depth map while supporting the video to be transferred via various collection of network. As the depth map is mainly used to synthesize videos from different views, corrupted contour region can damage the overall quality of video. We hereby adapt a new differential quantization method when separating the contour region. The experimental results show that the proposed method can improve video quality by 0.06~0.5dB which translate the bit rate saving by 0.1~1.15%, when compared to the reference software.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2001.05a
• /
• pp.353-356
• /
• 2001

기존의 범용시스템과 대별되는 임베디드 시스템의 수요가 급증하면서 하드웨어부분의 중심축인 임베디드 프로세서에 대한 관심이 하루가 다르게 커지고 있다. 또한 사용자들이 작고 간편하면서도 기존의 범용시스템과 같은 기능들을 가지는 높은 수준의 성능을 요구하게 됨으로서 한 칩 안에 여러 가지 기능을 함께 구현하거나 시스템을 집적하는 시스템 칩의 상품화가 이루어지고 있는 추세이다. 날로 경쟁이 치열해저 가는 비메모리 설계 분야에서 누가 더욱 우수한 반도체 관련 IP를 확보하느냐가 승패의 관건이 될 것은 당연한 일이 되었다. 된 논문에서는 기존에 성능이 검증된 SPARC 아키텍처 V8을 근간으로 한 VHDL모델을 분석하고, 시뮬레이션을 통하여 그 기능을 검증하였으며, Synopsys FC2(FPGA Compiler 2)를 이용하여 로직 합성하였으며, 그 결과를 Xilinx VIRTEX 3000 FPGA를 이용하여 구현하였다.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.02a
• /
• pp.475-475
• /
• 2011

현재 수열합성법으로 이용하여 1차원으로 수직 성장한 ZnO 나노와이어는 밴드 갭이 3.37ev로 큰 밴드 갭을 갖는 물질이며 밀도 조절이 매우 어려운 것으로 알려져 있다. ZnO 나노와이어는 기존의 리소그래피 기반을 둔 Top-Down 방식과 달리 자발적인 형성과정으로 높은 결정성을 가지게 되는데, 이는 ZnO 나노와이어가 큰 종횡비 와 전자친화도를 가지고 있어 높은 전계방출 효과를 기대하게 되는 부분이다. 본 연구에서는 실버를 열처리하여 형성된 실버 나노파티클을 마스킹층으로 사용하여 ZnO 나노와어의 밀도 조절을 하고자 하였다. 실버막을 AZO seed layer 기판 위에 증착한뒤 $200{\sim}600^{\circ}C$ 까지 열처리 후 수열합성법을 이용하여 ZnO nanowire를 성장하였다. 또한 전구체인 ZN(NO3)2${\cdot}$6H2O 와 HMT 에 각각 Ammonium chloride와 PEI를 첨가하였고, PEI 의 몰농도를 변화하여 성장된 ZnO 나노와이어의 구조적, 광학적 특성을 평가함으로서 전자소자 적용 가능성을 확인하였다.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 1996.10a
• /
• pp.118-123
• /
• 1996

The purpose of this study is to develop acoustic substructure synthesis method that can be applied to acoustic modal analysis of complex acoustic systems. Acoustic modal analysis method to be introduced here is a method that analyze acoustic natural mode shape of the complex acoustic system by the principle of CMS(component mode synthesis method). This paper describes the acoustic modal analysis of the acoustic finite element model of simple expansion pipe by acoustic substructure synthesis method. The results of acoustic modal analysis analyzed by Acoustic substructure synthesis method and the results, by FEM(finite element method) shows good agreement.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2000.11a
• /
• pp.201-206
• /
• 2000

In this work transfer function synthesis method based on FRF data of each substructure is investigated for a complex structure composed of many substructures. Though the transfer function synthesis method has superiority to analyze the characteristics of interfaces among substructures effectively, many problems arise in the computation process, especially matrix inversion process. Due to computational problems, the error between the data obtained by test and the predictions through computations is inevitable. So in this paper, computational aspects in the transfer function synthesis method are examined through a steering system problem of passenger car. For the FBS method, frequency response functions of 3 substructures are measured experimentally. Effects of several parameters such as matrix inversion method, connection conditions between substructures and off-diagonal terms on system response are studied numerically.

• Journal of Advanced Marine Engineering and Technology
• /
• v.19 no.3
• /
• pp.42-49
• /
• 1995

In this study, the optimum structural modification of the L-type structure by shape changes is suggested. The vibration characteristics of L-type structure are analyzed by the sub-structure synthesis method, and the coordinte sensitivities of each sub-structure are calculated and the change quantities of the positions to be modified are suggested by using the coordinate sensitivities. The results obtained are as follows : 1. The sensitivities of the natural frequency could be calculated by the sensitivity analysis. 2. The change quantities of the position to be modified could be suggested by the optimum structural modification method. 3. The developed program could reduce the process and time of computation, since the sensitivity was directly calculated by differential method, not finite difference method.