• 한국기계가공학회지
• /
• 제3권2호
• /
• pp.46-52
• /
• 2004

The most of reducers consist of many gear parts, but a ball reducer never contains a gear. As the ball reducer with gearless has no back lash, it is necessary more and more to precision machine. The reducing of ball reducer happens by cycloid curves and all instant relative velocity centers always pass on a given constant position when rotational running. Then, it is difficult to calculate cycloid curve for design and machining. So, this paper studied a software for the design of the ball reducer design and machined all parts included among cycloid curve. By using the developed software, this study has large benefit to design every ball reducer.

• 동력기계공학회지
• /
• 제15권4호
• /
• pp.48-53
• /
• 2011

Upon reviewing recent trends for robots, it can be seen that robots are gradually being miniaturized. However, most commercially available speed reducers have limitations in terms of structure and vibration when applied to small robots. In this respect, a tooth profile manufactured using thin plates was designed using balls and data analyzed related to numerical and FEM analysis. The speed reducer was manufactured to check their performance. The manufactured thin plate type speed reducer imposes less compressive stress on its tooth profile and balls, which can greatly increase feasibility.

• 한국윤활학회:학술대회논문집
• /
• 한국윤활학회 1999년도 제30회 추계학술대회
• /
• pp.289-295
• /
• 1999

A new conceptual wave rolling ball reducer was proposed and investigated. The main components of the reducer were a eccentric input shaft and bearings, followers with balls, a flange, and a outer ring with waved groove. Followers moved along the holes of the flange according to the rotation of the shaft. And the balls installed in tips of followers were rolled with the waved groove of outer ring. When the shaft was rotated as one revolution and the outer ring was fixed, the flange was rotated as one wave. The kinematic analysis of the reducer carried out. The forces of each components were estimated, and the main design parameters were investigated. The design program using Visual C++ and Auto Lisp to determine the design parameters and to generate the drawing sheet.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2004년도 춘계학술대회 논문요약집
• /
• pp.271-271
• /
• 2004

다양한 목적으로 개발이 요구되는 로봇의 작업환경과 운동능력에 맞게 로봇을 개발하기 위해서는 다음의 설계 과정을 필요로 한다. 하나, 로봇의 전체 설계 중 개념설계/기초설계로 로봇링크의 길이나, 작업영역에 대한 설계 변수를 결정하는 로봇 기구설계. 둘, 로봇 상세설계로 작업을 실행하는데 필요한 운동능력에 대한 설계 변수를 결정하는 로봇 동역학 설계. 셋, 로봇 기구, 동역학 설계를 기초로 하여 로봇이 최적의 성능을 발휘할 수 있는 로봇 부품들에 대한 요소품 설계가 있다.(중략)

• 로봇학회논문지
• /
• 제19권3호
• /
• pp.229-235
• /
• 2024

This research focuses on reducers, vital components in service robots, with a special emphasis on friction reducers designed for use in environments where interaction with humans is essential. For service robots to effectively perform advanced tasks, it is crucial to have reducers that offer high precision, high reduction ratios, and strong resistance to impacts. To meet these requirements, our study introduces a new design methodology and proposes a friction reducer featuring a multi-layer ball array structure. Compared to traditional gearbox-based reducers, the friction reducer developed in this study demonstrates a higher reduction ratio and improved shock absorption. The performance of this newly proposed reducer has been verified through experimental analysis. It was confirmed that by minimizing drive losses, the system has high backdrivability, delivering a torque of 15 Nm. Additionally, it was observed that the system showed an immediate response without backlash to fine input vibrations.

• 대한교통학회지
• /
• 제31권1호
• /
• pp.3-13
• /
• 2013

본 연구는 신호기 위치 조정이 도시지역의 교차로 신호등에 접근하는 운전자들의 운전행태에 미치는 영향을 분석하여 딜레마 존의 특성을 분석하였다. 접근속도의 분석은 신호등의 위치 조정이 이루어진 3개 지점에서 측정된 사전-사후 비교를 통해 이루어졌다. 본 연구에서는 황색신호시 정지차량의 경우 지점속도를 낮춰, 딜레마존 시작점을 앞당김으로써 딜레마존의 크기를 작게 하는 반면에 통과차량의 경우 교차로에 근접하여 지점속도를 높임으로써 딜레마존 끝점을 뒤로 이동시키게 됨을 발견하였다. 결국 신호기 위치조정은 딜레마존의 크기를 줄임으로써 교차로 안전성을 증진하는 데 기여한다고 볼 수 있다. 동일한 속도로 진입한 차량군의 운행특성을 볼 때, 감속을 하기 위한 감속도가 반영되어 지점별 속도가 상당히 크게 변화했는데 이것은 딜레마존에서 사용되는 접근속도의 개념에 대한 보다 엄밀한 규정이 필요하며, 일반적으로 사용되는 접근속도의 개념이 접근구간속도임을 고려할 때 딜레마존의 계산식은 접근속도 보다 지점속도를 사용하는 것이 더 정확할 수 있음을 보여준다.

• 한국윤활학회:학술대회논문집
• /
• 한국윤활학회 2002년도 제35회 춘계학술대회
• /
• pp.143-149
• /
• 2002

Ball reducer with waved grooves has many advantages over other reducers for the high-reduction ratios, low noise and low energy loss, etc. The mechanism of force transmission is very similar to that of cam and follower in automobile valve train system especially in the contact geometry. In this study, we have investigated the traces of contact between ball and outer race and the working behaviors with a certain reduction ratio. In order to verify the contact behaviors between ball and outer race, which determines the critical endurance life the contact velocity and load are computed for a cycle. During some period of a cycle, the contact velocity reverses its direction very suddenly, which causes undesirable endurance performance of this machinery. From the computational investigation in this work, we hope to predict similar contact damages in other machinery due to this kind of contact behaviors, which is very common in many contact phenomena.