• Transactions of the Korean Society of Mechanical Engineers
• /
• v.15 no.5
• /
• pp.1620-1634
• /
• 1991

본 연구에서는 전기/자기 및 기계적 요소들이 복합되어 이루어진 자기부상 시 스템의 설현을 위한 기초단계로서 제어동역학(controlled dynamics) 측면에 입각한 모 델식을 본드선도 기법을 이용하여 보다 조직적으로 유도한다. 우선, 자속흐름 확장 및 자속 유출량을 고려하여 부상 시스템을 모델링하고 차량/레일 및 2차 현가(second ary suspension)장치를 포함한 자기부상 시스템을 모델링한다. 다음, 지지 및 안내 방향의 동역학을 동시에 고려한 2차원 자기부상 시스템을 본드선도의 다접점 필드(mu- ltiport field) 개념을 이용하여 모델링한다. 끝으로, 본드선도 기법으로 모델링된 2차원 자기부상 시스템의 안정도와 성능을 향상시키기 위하여 LOG/LTR(linear quadra- tic Gaussian control with loop transfer recovery) 제어시스템을 설계한다. LQG/ LTR 제어방법은 Doyle과 Stein에 의해 인성(stability-robustness) 문제와 주파수역 성능을 설계시에 직접 고려할 수 있는 강력한 선형 다변수 제어시스템 설곕방법으로 현재 널리 사용되고 있다.

• Journal of the KSME
• /
• v.33 no.1
• /
• pp.22-32
• /
• 1993

본드선도는 물리적 등가가 적용되는 모든 상사 시스템을 대단히 조직이며 일관성 있게 모델링할 수있을 뿐만 아니라 시스템의 동적 방정식을 제어동역학 관점에 유리한 상태방정식으로 직접 유도할 수 있다. 또한 본드선도는 모델링 단계에서 무시된 각 요소들의 동적 특성 즉, 기계시스 템에서 회전축의 탄성처짐이나 운동 물체들 사이의 마찰 효과 전기 . 자기시스템에서 자속유출량, 그리고 유체 . 유압시스템에서 밀봉부분의 유량손실이나 압축성 유체 특성 등을 기곤에 구성된 본드선도의 변경 없이 각 특성들이 나타나는 본드상에 적절한 접합요소와 함께 단순히 첨가하여 고려할 수 있기 때문에 모델링 과정을 다시 반복하지 않고도 무시된 동적 특성들이 전체시스템에 미치는 영향을 파악할 수 있다. 특히 본드선도가 에너지 변환 장치나 에너지 유동 메카니즘이 복잡한 다에너지역 시스템 등에 거동이 전체시스템에 미치는 효과를 시각적으로 보다 세밀히 파악할 수 있을 뿐만 아니라 구성된 본드선도에 인과관계를 할당하여 본드선도의 접합요소를 통하여 유도된 최종적인 동적 방정식이 현실적으로 실현 가능한 물리시스템인지 파악할 수 있어 본드선도 모델링 단계에서 시스템을 묘사하는 동적 방정식의 옳고 그름을 평가할 수 있다. 이와 같이 본드선도는 기계, 전기 . 자기, 유체 . 유압, 열 시스템 및 이들이 조합된 복잡한 다에너지역 시스템 등을 효과적으로 모데링할 수 있는 매우 유용한 동적 시스템 모델링 방법이다.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.21 no.9
• /
• pp.1414-1421
• /
• 1997

This paper examines the physics and mechanics governing the dynamic interaction between physical systems and suggests the four structures of bond graph prototypes, considered as a general model that can promise their dynamic behavior physically resonable. The bond graph prototypes originating from the paper are more realistic junction structures than those used to model dynamic systems conventionally by bond graph standards in whether physical constraints are involved or not when the energy exchange between two dynamic components arises. It is shown that the bond graph prototypes are dynamic or energetic in their describing equations compared to the bond graph standards, and connectivity and causality are properties of dynamic systems upon which the steps developed in this paper for the bond graph prototypes are wholly based and their definitions an concepts are highly emphasized all through the paper.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2002.10a
• /
• pp.425-430
• /
• 2002

An automatic transmission model using the bond graph techniques is developed for analyzing shift characteristics of vehicles. Bond graph models can be systemically manipulated to yield state space equations of standard form. Bond graph techniques are applied for modeling overall automatic transmission systems and shift models. A fuzzy controller is synthesized for the verification of a shifting model in the ${1^st} gear to the {2^nd}$ gear. Simulation results show the fitness of models by the bond graph techniques.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.20 no.11
• /
• pp.3507-3515
• /
• 1996

This paper presents an attempt to find the physical structure of dynamic systems which achieves the behavior of a given system function. The scheme pursued by the paper would be regarded as synthesizing dynamic systems, and a method to synthesize them analytically is proposed by means of bond graph prototypes. The method adopts several conceptsused to synthesize networks in the electrical field, but yet deconstrates its own strengths such as the freedom from assigning causality and determining junction types. Also, itis shown that this method has further advantages in reticulating a given specification into feedforward and feedback components relative to network synthesis and the method is examined though an example to trace the outline of the analytical synthesis of dynamic systems using bond graph prototypes.

• Journal of the Korean Magnetics Society
• /
• v.6 no.5
• /
• pp.310-316
• /
• 1996

In this study magnetic properties of anisotropic ferrite bonded magnets produced by extrusion molding with a variety of magnetic field, extrusion mold temperature and extrusion rate were investigated. X-ray diffraction study showed the alignment of magnetic powder was decreased by molten flow in extrusion mold. When the temperature of extrusion mold was $20^{\circ}C$, the degree of alignment as much as 82% could be achieved under the applied magnetic field of 4 kOe. The bonded magnets having the remanence of 2.2 kG was able to fabricated by extrusion molding when the packing density of Sr-ferrite powder was 50 vol%.

• Journal of Power System Engineering
• /
• v.12 no.2
• /
• pp.62-70
• /
• 2008

The paper made a description of the method for numerical analysis and modeling of a proportional pressure control valve by bondgraph. The valve is a three port pressure regulator valve, consists of two subsystems; a proportional solenoid and a spool assembly. A purpose of this study is to analysis the dynamic characteristics of the valve using bondgraph method and to verified results that each of parameters has an effect on modeling. It considered the effect which the presence of solenoid, flow coefficient and non-linearity of resistance causes in the valve modeling. In particular, it is analyzed the effect that the solenoid interacted with modeling results and characteristics of the nonlinear resistance through orifice on the supply and discharge side of valve. Thus this paper described method to present nonlinear characteristics by bondgraph modeling method, so that we could know easily result that each parameters has an effect on the modeling.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.6 no.4
• /
• pp.66-75
• /
• 1998

In many case of optimal design and sensitivity analysis, obtaining of transfer function between input and output variables is a difficult and time-consuming problem. The bond graph modeling is a method that is used for making it easy to analyze complex systems composed of mechanical and electrical parts. It gives us a simple and systematic tool to get state-space equations easily. And we can obtain the transfer function graphically using bond graph and Mason's rule. This paper shows how bond graphs are converted to block diagram and how Mason's rule is applied. And the simple direct method to obtain transfer function from bond graph is introduced. As a example, induction of transfer function of electric power steering composed of mechanical and electrical parts will be done.

• Journal of the Korean Magnetics Society
• /
• v.4 no.3
• /
• pp.219-225
• /
• 1994

The alignment of Sr-ferrite magnetic powders, which is usually related to the fluidity and the applied magnetic field, is investicated in the anisotropic Sr-ferrite / resin-bonded permanent magnets. The magnetic powder alignment is observed to increase with the applied magnetic field and the fluidity which is a function of molding temperature and powder packing ratio. The best magnetic powder alignment is achieved at the following conditions; Sr-ferrite packing ratio of 56vol%, apparent viscosity of about 3000 poise in $1000sec^{-1}$ shear rate, and applied magnetic field of about 5kOe. The degree of preferred orientation of the magnetic powders in the field direction, as determined by the dc hysterisis graphs, is 84~85% (0.84~0.85). This result is in agreement with the value of 0.85 obtained by the X-ray experiments in the $2{\theta}$ range of ${23~40}^0$. The best magnetic properties obtained are:2.2kG of remanent flux density, 2.2MGOe of maximum energy product.

• Journal of the Korean Society for Precision Engineering
• /
• v.13 no.12
• /
• pp.54-62
• /
• 1996

To get the time response characteristics of the hydrostatic transmission, seaborne winch is modelde by using bond graphs. After modeling of its basic elements, it is represented as power flow, and the determination of variable causality. The state equations are derived by using CAMP. As dynamic stabilites and solutions are investigated by perturbation method and direct integration, winch system is stable. Simulations are performed under the conditions of low speed, high speed, and maximum tension. The pressure and flow rate of the hydrostatic transmission have a big overshoot. But when it is comparaed to the empirical data with simulation results, it is similar to each other. When a lead compensator is applied to improve response characteristics of the hydrostatic transmission, rise time and overshoot of the system are improved.