• Progress in Medical Physics
• /
• v.14 no.2
• /
• pp.124-130
• /
• 2003

Currently, as a consequence of PACS (Picture Archiving Communication System) implementation many hospitals are replacing conventional film-type interpretations of diagnostic medical images with new digital-format interpretations that can also be saved, and retrieve However, the big limitation in PACS is considered to be the lack of mobility. The purpose of this study is to determine the optimal communication packet size. This was done by considering the terms occurred in the wireless communication. After encoding medical image using JPGE2000 image compression method, This method embodied auto-error correction technique preventing the loss of packets occurred during wireless communication. A PC class server, with capabilities to load, collect data, save images, and connect with other network, was installed. Image data were compressed using JPEG2000 algorithm which supports the capability of high energy density and compression ratio, to communicate through a wireless network. Image data were also transmitted in block units coeded by JPEG2000 to prevent the loss of the packets in a wireless network. When JPGE2000 image data were decoded in a PUA (Personal Digital Assistant), it was instantaneous for a MR (Magnetic Resonance) head image of 256${\times}$256 pixels, while it took approximately 5 seconds to decode a CR (Computed Radiography) chest image of 800${\times}$790 pixels. In the transmission of the image data using a CDMA 1X module (Code-Division Multiple Access 1st Generation), 256 byte/sec was considered a stable transmission rate, but packets were lost in the intervals at the transmission rate of 1Kbyte/sec. However, even with a transmission rate above 1 Kbyte/sec, packets were not lost in wireless LAN. Current PACS are not compatible with wireless networks. because it does not have an interface between wired and wireless. Thus, the mobile JPEG2000 image viewing system was developed in order to complement mobility-a limitation in PACS. Moreover, the weak-connections of the wireless network was enhanced by re-transmitting image data within a limitations The results of this study are expected to play an interface role between the current wired-networks PACS and the mobile devices.

• The KIPS Transactions:PartC
• /
• v.13C no.1 s.104
• /
• pp.83-94
• /
• 2006

This paper describes ATM cell encipherment method using Rijndael Algorithm adopted as an AES(Advanced Encryption Standard) by NIST in 2001. ISO 9160 describes the requirement of physical layer data processing in encryption/decryption. For the description of ATM cell encipherment method, we implemented ATM data encipherment equipment which satisfies the requirements of ISO 9160, and verified the encipherment/decipherment processing at ATM STM-1 rate(155.52Mbps). The DES algorithm can process data in the block size of 64 bits and its key length is 64 bits, but the Rijndael algorithm can process data in the block size of 128 bits and the key length of 128, 192, or 256 bits selectively. So it is more flexible in high bit rate data processing and stronger in encription strength than DES. For tile real time encryption of high bit rate data stream. Rijndael algorithm was implemented in FPGA in this experiment. The boundary of serial UNI cell was detected by the CRC method, and in the case of user data cell the payload of 48 octets (384 bits) is converted in parallel and transferred to 3 Rijndael encipherment module in the block size of 128 bits individually. After completion of encryption, the header stored in buffer is attached to the enciphered payload and retransmitted in the format of cell. At the receiving end, the boundary of ceil is detected by the CRC method and the payload type is decided. n the payload type is the user data cell, the payload of the cell is transferred to the 3-Rijndael decryption module in the block sire of 128 bits for decryption of data. And in the case of maintenance cell, the payload is extracted without decryption processing.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.45 no.2
• /
• pp.81-89
• /
• 2008

Wideband speech, characterized by a bandwidth of about 7 kHz (50-7000 Hz), provides a substantial quality improvement in terms of naturalness and intelligibility. Although higher data rates are required, it has extended its application to audio and video conferencing, high-quality multimedia communications in mobile links or packet-switched transmissions, and digital AM broadcasting. In this paper, we present a new bandwidth-scalable coder for wideband speech and audio signals. The proposed coder spits 8kHz signal bandwidth into two narrow bands, and different coding schemes are applied to each band. The lower-band signal is coded using the ITU-T G.729/G.729E coder, and the higher-band signal is compressed using a new algorithm based on the gammatone filter bank with an invertible auditory model. Due to the split-band architecture and completely independent coding schemes for each band, the output speech of the decoder can be selected to be a narrowband or wideband according to the channel condition. Subjective tests showed that, for wideband speech and audio signals, the proposed coder at 14.2/18 kbit/s produces superior quality to ITU-T 24 kbit/s G.722.1 with the shorter algorithmic delay.

• The KIPS Transactions:PartB
• /
• v.9B no.5
• /
• pp.571-578
• /
• 2002

In this paper, we propose a video sequence coding scheme called AMV (Auxiliary Motion Vector) to minimize error propagation caused by transmission errors over the Internet. Unlike the conventional coding schemes the AMY coder, for a macroblock in a frame, selects two best matching blocks among several preceding frames. The best matching block, called a primary block, is used for motion compensation of the destination macroblock. The other block, called an auxiliary block, replaces the primary block in case of its loss at the decoder. When a primary block is corrupted or lost during transmission, the decoder can efficiently and simply suppress error propagation to the subsequent frames by replacing the block with an auxiliary block. This scheme has an advantage of reducing both the number and the impact of error propagations. We implemented the proposed coder by modifying H.263 standard coding and evaluated the performance of our proposed scheme in the simulation. The simulation results show that AMV coder is more efficient than the H.263 baseline coder at the high packet loss rate.

• Journal of Broadcast Engineering
• /
• v.2 no.2
• /
• pp.206-215
• /
• 1997

We pror.a;e a H.263-based video ceder with two-layer ocalability. The bare layer is ceded by using the default H.263 axling algorithms to achieve high compresred video data and the enhanced layer is axied by enhanced axling such as HVS-based quantization updating. The enhanced layer contains only arled refinement data for the OCT coefficients of the bare layer. Bitstream syntax and semantics for enhancement layer are designed and quantizer design using the HVS is pror.ooed. Data from the two layers are combined after inverse quantization and inverse OCT prcx:esses in the deaxier. We show with e~rirrental results that the pror.a;ed layered arlee achieves comparable picture quality with non-layered arlee at bitrates of 30 kbr;s or less. Overhead information for the bitstream layer can 00 limited to less than 0.5 kbits/frame.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.14 no.5
• /
• pp.67-72
• /
• 2014

In this paper, an energy harvesting scheme is applied in the cooperative communication. The proposed scheme uses an energy harvesting relay in which the relay harvests the energy from the source node and transfers to the power form in forwarding the received data to the destination node. The well-known maximal ratio combining (MRC) technique is applied to increase the diversity gain at the destination. Therefore, with applying the proposed energy harvesting scheme, the limited power at the relay is solved, and the operation efficiency of the network and the mobile devices is improved. Finally, performance of the proposed protocol is analyzed in terms of bit error rate, outage probability, power collection efficiency.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.35 no.4B
• /
• pp.687-694
• /
• 2010

IPTV(Internet Protocol Television) is an emerging technology in which telecommunication and broadcasting technologies are converged. IPTV service providers usually multicast scrambled contents. And only legitimate subscribers who pass the access control can de-scramble and use the contents. In order to ensure revenues, providers oftentimes employ password-based authentication protocols that ensure secure authentication processes between set-top box and smart card. In this paper, we propose a fingerprint-based 1-out-of-n authentication protocol which provides convenient and more secure authentication process in some organizational environments. The proposed scheme shows that only those who provide legitimate fingerprint information can be authenticated even in a situation that both password and smart card are compromised.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.39 no.5
• /
• pp.32-44
• /
• 2002

In this paper, we propose TV caption-based KSL(Korean Sign Language) generation system. Through TV caption decoder, this caption signal is transmitted to PC. Next, caption signal is segmented into meaning units by morphological analyzer in considering specific characteristics of Korean sign language. Finally, 3D KSL generation system represents the transformed morphological information by 3D visual graphics. Specifically, we propose a morphological analyzer with many pre-processing techniques for real-time capability. Our developed system is applied to real TV caption program. Through usage of the deaf, we conclude that our system is sufficiently usable compared to conventional TV caption program.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.24 no.12B
• /
• pp.2262-2274
• /
• 1999

This paper, proposes an integrated management platform to solve various management issues for multicast environments, which have been considered as an important transfer method together the appearance of multipeer applications recently(i.e,. IPME). First of all this paper describes the problems and related works of multicast environments, and proposes the general architecture of a management platform to manage multicast environments after considering design requirements to implement a proposed platform. This paper also proposes the management services to be provided, a general system architecture, its functional modules, and the management architecture such as a management procedure, establishment phases, management policies, and a Management Information Base(MIB) structure. In order to verify the proposed IPME, it is also applied and implemented as prototyping system to the QoS management service for H.263 video encoding/decoding system, that is IPME-QoS, which currently is a critical issue and uses multicast environments.

• The Transactions of the Korea Information Processing Society
• /
• v.5 no.4
• /
• pp.975-983
• /
• 1998

In these days, information communication systems are based on both open distributed computing technologies and object-oriented techniques like inheritance, encapsulation and object reuse to support various system configuration and application. As information systems are interconnected through unsecure networks, the need for the secure information exchange is more critical than before. In this paper, we have designed and implemented a transparent CORBA-basce Security infrastructure with authentication, security context association, access control and security information management to support a secure applications in distributed object environment. SESAME Ver. 4 was adopted as an external security service to manage user privilege attributes and to distribute keys for data encryption, decryption and integrity. Using filter and transformer with an interface to Object Request Broker, it provides a transparent security service to applications. The filter objects are special classes that allow additional parameters to be inserted into messages before they are sent and removed just after they are received. The transformer objects are special classes that allow direct access to the byte stream of every messages for encryption and decryption before it is sent and just after it is received. This study is to implement the access control interceptor(ACI) and the secure invocation interceptor(SII) of secure ORB defined in CORBA using filter and transformer.