• Journal of the Microelectronics and Packaging Society
• /
• v.20 no.4
• /
• pp.13-16
• /
• 2013

A lot of various researches have been going on to use heat spreader for LED module. Nano porous aluminum anodic oxide (AAO) applied LED, which is produced from anodization, is easy and economically advantageous. Convensional LED module is consist of aluminum/adhesive/copper circuit. The polymer adhesive in this module is used as heat spreader. However the thermal emission of LED component is degraded because of low heat conductivity of polymer and also reliability of LED component is reduced. Therefore, AAO in this work was applied to heat spreader of LED module which has higher heat conductivity compare to polymer. Bonding strength between AAO and copper circuit was improved with Ti/Cu seed layer by copper sputtering process (DBC) before the bonding. And this copper circuit has been fabricated by electro plating method. Peel strength of AAO and copper circuit in this work showed range between 1.18~1.45 kgf/cm with anodizing process which is very suitable for high power LED application.

• Journal of The Korean Association For Science Education
• /
• v.35 no.6
• /
• pp.949-959
• /
• 2015

In this case study, we analyzed the STEAM lessons conducted by secondary science teachers in the perspective of the CHAT. Two science teachers at high schools in Seoul participated in this study. All of the teaching-learning materials were collected before lessons, and their lessons were observed and videotaped. We also observed the atmospheres in both school offices and classrooms. Semi-structured interviews were conducted before and after their lessons. All the data collected were categorized according to the elements of the activity system and analyzed by using the constant comparative method. The analyses of the results revealed that both teachers did not consider the student-centered self-directed activities in their STEAM lessons, but that they differed in the subject element such as teacher's professionalism on STEAM. Various elements of the activity system such as environmental characteristics of the school and policies about the STEAM influenced the performance of their STEAM lessons. Contradictions in the elements of the activity system brought about various changes. Successful experiences of the STEAM lessons by complex effects of the elements positively influenced their performances on their STEAM lessons. Based on these results, we have made some suggestions for the establishment of the STEAM in secondary schools.

• Composites Research
• /
• v.29 no.4
• /
• pp.194-202
• /
• 2016

A graphene film, two-dimensional carbon sheet, is a promising material for future electronic devices and so on. In graphene applications, the effect of substrate on the atomic/electronic structures of graphene is significant, so we studied an interaction between graphene film and substrate. To study the effect, we investigated the graphene films grown on Ni substrate with two crystal face of (111) and (100) by Raman spectroscopy, comparing with graphene films transferred on $SiO_2/Si$ substrate. In our study, the doping effect caused by charge transfer from Ni or $SiO_2/Si$ substrate to graphene was not observed. The bonding force between graphene and Ni substrate is stronger than that between graphene and $SiO_2/Si$. The graphene films grown on Ni substrate showed compressive strain and the growth of graphene films is incommensurate with Ni (100) lattice. The position of 2D band of graphene synthesized on Ni (111) and (100) substrate was different, and this result will be studied in the near future.

• Composites Research
• /
• v.29 no.2
• /
• pp.45-52
• /
• 2016

An understanding of the failure mechanisms of the adhesive layer is decisive in interpreting the performance of a particular adhesive joint because the delamination is one of the most common failure modes of the laminated composites such as the fiber metal laminates. The interface between different materials, which is the case between the metal and the composite layers in this study, can be loaded through a combination of fracture modes. All loads can be decomposed into peel stresses, perpendicular to the interface, and two in-plane shear stresses, leading to three basic fracture mode I, II and III. To determine the load causing the delamination growth, the energy release rate should be identified in corresponding criterion involving the critical energy release rate ($G_C$) of the material. The critical energy release rate based on these three modes will be $G_{IC}$, $G_{IIC}$ and $G_{IIIC}$. In this study, to evaluate the fracture behaviors in the fracture mode I and II of the adhesive layer in fiber metal laminates, the double cantilever beam and the end-notched flexure tests were performed using the reference adhesive joints. Furthermore, it is confirmed that the experimental results of the adhesive fracture toughness can be applied by the comparison with the finite element analysis using cohesive zone model.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.33 no.5
• /
• pp.443-451
• /
• 2013

Acoustic emission(AE) has emerged as a powerful nondestructive tool to detect any further growth or expansion of preexisting defects or to characterize failure mechanisms. Recently, this kind of technique, that is an in-situ monitoring of inside damages of materials or structures, becomes increasingly popular for monitoring the integrity of large structures like a huge wind turbine blade. In this study, the activities of AE signals generated from external artificial sources was evaluated and located by new developed signal mapping source location method and this test is conducted by 750 kW full-scale blade. And a new source location method was applied to assess the damage in the wind turbine blade during step-by-step static load test. In this static loading test, we have used a full scale blade of 100 kW in capacity. The results show that the acoustic emission activities give a good agreement with the stress distribution and damage location in the blade. Finally, the applicability of the new source location method was confirmed by comparison of the result of source location and experimental damage location.

• Journal of Life Science
• /
• v.21 no.8
• /
• pp.1183-1189
• /
• 2011

The present study is aimed at examining the effects of the physico-chemical environmental factors of water systems on water bloom at Homin and Gagok reservoirs in Pungcheon-Myeon, Andong, Gyeongsangbuk-do. The mean water temperature and the contents of chlorophyll-a, total-nitrogen, total-phosphorus and phosphate-phosphorus were higher at the Gagok reservoir. On the other hand, the pH mean value was higher at the Homin reservoir. The mean value of microelements (Na, K, Mg, Fe, Si) was higher at the Gagok reservoir. The cyanobacteria which was considered to be the cause of water bloom at the two reservoirs was Microcystis aeruginosa. It started to grow in May and showed the highest standing crop in August. Between the increase of standing crop of M. aeruginosa and the water quality, correlation values of $Na^+$ (r=-0.910, p<0.05), $Fe^{2+}$ (r=-0.855, p<0.05) and $Si^{4+}$ (r=0.989, p<0.01) at the Homin reservoir increased amount of standing crop. Meanwhile, at the Gagok reservoir, the contents of $Na^+$ (r=-0.776, p<0.05), $Si^{4+}$ (r=0.899, p<0.05) were highly related to the increase of standing crop. Interestingly, Si, which is the limiting factor for diatoms, has a high correlation with standing crop of cyanobacteria. In conclusion, the water blooming is caused not by a simple factor but a synergistic effect due to complex actions including high concentrations of nitrogen and phosphorus ions and many other environmental factors.

• Journal of Digital Convergence
• /
• v.12 no.2
• /
• pp.423-430
• /
• 2014

Patient safety culture for the general hospital to investigate the perception of radiological technologists, managing of the patient safety provides the Foundation for the safety activities as a basis to develop a program for providing. Patient safety culture for the general hospital to investigate the perception of Radiological technologists, the duration of the survey of the study on June 13, 2012 to June 20, and five general hospitals worked on Radiological technologists workers were material and analyzed the target of 198 (SPSS ver. 19.0). Patient safety activities within the Department, the factors affecting direct care, communication, medical malpractice, hospitals rated, safe for the patient safety culture and the reported accidents, dangerous and caused an accident, most feel that patient safety incident reporting system according to the results of evaluating medical accidents patient safety culture regarding recognition, work appeared in more than 25 years, even the most highly evaluated, the working period of 10 patient safety to 15 years the most highly. Therefore, General Hospital, Director of the patient safety culture improvement of radiation in order to have sufficient staffing, aggressive approach to patient safety issues, and safe working period of relapse prevention of accidents to the radiation as well as giving systematic consideration of mission medical accident reporting system will be active.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.35 no.4
• /
• pp.257-263
• /
• 2009

In order to search for new whitening cosmetic ingredients from Chinese herbal extracts including Chinese herbs and complex prescriptions from TCM (Traditional Chinese Medicine), we screened about 47 TCM extracts collected from China. We tested their inhibitory effects on melanogenesis by using in vitro tyrosinase inhibition assay and B16 melanoma cells. We selected Siphonostegia chinensis and Salvianic miltiorrhiza Bunge. We isolated Danshensu ($\alpha$,3,4-trihydroxybenzenepropanoic acid sodium salt) from Salvianic miltiorrhiza Bunge extract and tested its inhibitory effect on melanin formation in B16-F10 melanoma cells. Danshensu suppressed melanin synthesis up to about 50% at a concentration of $100\;{\mu}g/mL$. Siphonostegia chinensis suppressed melanin synthesis up to about 60% at a concentration of $300\;{\mu}g/mL$. The results showed that these extracts could be used as new natural active ingredients for whitening cosmetics.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.35 no.4
• /
• pp.309-315
• /
• 2009

In our search for the natural cosmetic ingredients, we found that Euryale ferox seed extract exhibited the strong antioxidative activity. Five active compounds were isolated from the ethyl acetate extract through various chromatographic methods and their structures were determined by NMR and MS spectral analysis. These compounds were identified as fucosterol (1), 3-(4-hydroxy-3-methoxybenzyl)-4-[(7'R),5'-dihydroxy-3'-methoxybenzyl]tetrahydrofuran (2), resorcinol (3), pyrogallol (4) and 4-O-methylgallic acid (5).We evaluated the antioxidative, antielastase activities and melanogenesis inhibitory effects of these compounds. The $SC_{50}$ values of compounds 2 ~ 5 for free radical scavenging activity were $17.0\;{\sim}\;100.2\;{\mu}M$ and especially compounds 4 and 5 were 6-fold more effective than ferulic acid as a positive control. And compounds 2 ~ 4 inhibited human neutrophil elastase with $IC_{50}$ values of $18.8\;{\sim}\;78.2\;{\mu}M$ and compound 3 also inhibited melanin synthesis in B16F10 melanoma cells with an $IC_{50}$ value of $492.8\;{\mu}M$. These results suggest that Euryale ferox extract having a lot of various active ingredients may be useful as a natural multi-functioning agent.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.36 no.6
• /
• pp.532-539
• /
• 1991

This study was conducted to screen genetic stock for resistant to pod shedding. Materials used were 7 recommended varieties in Korea and 211 introduced varieties containing 94 Virginia type, 99 Spanish type and 18 Valencia type varieties. the days from seeding to first anthesis. number of mature pods per plant. 100 seeds weight and shedded pod ratio per total mature pod at harvesting were investigated. And the breaking tensile strength required to detach a pod from its gynophore was measured at a proper time for harvesting of each variety. In addition. factors related to pod shedding were discussed. The first anthesis of Spanish and Valencia types were earlier than that of Virginia type, but Korean recommended varieties which were recognized as Virginia type had relatively earlier anthesis. The varieties of Spanish type yielded more pods compared with those of Valencia and Virginia types. but Korean recom-mended varieties yielded slightly more pods than the others. Seeds weight of Korean recommended varieties was larger than not merely those of Spanish and Valencia types which were small seeds but also those of Virginia type which were large seeds. The breaking tensile strengths between pod and gynophore were various among the varieties belonging to same type. The strength was relatively strong in the Spanish type, but weak in both Virginia type and Korean recommended varieties. Therefore, pod shedding in the varieties of Spanish type was low and high in Virginia type and Korean recommended varieties. There were positive or negative correlations at the 0.1 % significan level among the days to first anthesis. number of pods per plant. seed weight, breaking tensile strength and shedding ratio. The pod shedding is considered a compound character that is affected by the factors such as breaking tensile strength between pod and gynophore, number of pods per plant and seed size.