• Proceedings of the Korean Society For Composite Materials Conference
• /
• 1999.11a
• /
• pp.264-267
• /
• 1999

복합적층판은 일반적으로 균일한 두께를 갖는 평평한 구조물을 형성하게 된다. 그러나 실제 적용시 적층판의 테이퍼링(tapering)이 요구되는 경우가 존재한다. 테이퍼진 복합재 구조물의 적용분야는 항공기의 날개, 수직/수평 안정판 및 헬리콥터의 로터 블레이드 등이다. (중략)

• Korean Journal of Optics and Photonics
• /
• v.20 no.4
• /
• pp.241-248
• /
• 2009

We suggest a new method to determine the off-alignment error of the composite film, together with in-plane($R_{in}$) and out-of-plane retardation($R_{th}$) of the compensation film, simultaneously. The composite film consists of a polarizing film and a compensation film for improvement of viewing angle of a liquid crystal display. We regarded the compensation film as o-plate with its optic axis along an arbitrary direction. By using an extended Jones matrix method, the polarization characteristics of the composite film are examined. The calculated Fourier constants, ($\alpha$, $\beta$) curves of the composite film as the azimuth angle is varied at the incident angles of $0^{\circ}$ and $50^{\circ}$, respectively, are used to determine the axis misalignment, the tilt angle and the azimuth angle of the compensation film by adopting the linear regressional analysis technique. Since this method can be applied for the inspection of the composite film even after laminating the polarizing film and the compensation film, it will be useful for simplifying the manufacturing process and reducing the production cost of liquid crystal display panels.

• Composites Research
• /
• v.20 no.5
• /
• pp.7-12
• /
• 2007

This paper aims to enhance the efficiency of bone fracture healing with bone plate made of fiber reinforced composite materials. The composite bone plate was designed as the same dimension and shape as the existing stainless steel bone plate. To find out the appropriate stacking sequence of the composite bone plate the variations of strain distributions were calculated using FE analysis when the bone plates were applied to the fracture site. From the analysis result it was found that the composite bone plate whose Young's modulus is lower than that of metal bone plate gave more uniform strain distribution and provided appropriate condition for callus formation and its development.

• 한국신재생에너지학회:학술대회논문집
• /
• 2010.06a
• /
• pp.145.2-145.2
• /
• 2010

탄소복합소재 분리판의 연료전지 성능을 시험하기 위해 소형 고분자연료전지 스택을 제작하였으며 연료전지 운전에 따른 성능변화를 측정하여 탄소복합소재 분리판이 연료전지 스택의 성능에 미치는 영향을 조사하였다. 자체 설계한 가스유로로 디자인된 분리판과 MEA를 적층한 스택의 초기 성능과 장기간 운전에 따른 전압 감소를 측정하였다. 또한 장시간 운전 동안 각 셀의 전압 거동도 함께 측정하였으며 비교를 위해 흑연 분리판을 이용하여 제작한 스택의 성능도 함께 시험하였다. 스택에서 각 셀의 성능은 단위전지에서의 성능과 유사하게 나타나 분리판과 스택의 구조가 셀의 성능을 충분히 보여줄 만큼 적절히 디자인된 것을 알 수 있었으며, 장시간 운전 동안 전류가 증가함에 따라 스택의 성능 감소도 점차 증가하였으며 두 종류의 스택이 유사한 성능 감소를 보여 자체 제작한 탄소복합소재 분리판이 흑연 분리판과 유사한 성능을 보임을 알 수 있었다.

• Journal of Power System Engineering
• /
• v.13 no.4
• /
• pp.49-55
• /
• 2009

복합재 적층판의 자유단 근처에서 나타나는 층간 응력의 집중 현상을 층간면 효과를 고려해 해석하였다. 복합재 적층판 내부의 임의의 위치에서 3차원 평형방정식을 만족시키기 위해 렉니츠키 응력함수를 도입하였으며, 가상일의 원리를 이용하여 지배방정식을 유도하였다. 주어진 응력함수를 이용하여 구한 3차원 응력들은 복합재 적층판의 아래 위 면뿐만 아니라 자유단에서 하중자유조건을 잘 만족한다. 기하학적 불연속성 때문에 복합재 적층판의 자유단에서는 응력의 특이가 발생하지만, 층간면 효과를 고려하게 되면 층간응력의 집중현상을 정확하게 해석할 수 있다. 자유단에서 발생한 층간응력의 크기를 보면, 층간면 효과를 고려할 경우, 응력특이 효과가 많이 줄어드는 것을 관찰할 수 있다. 본 연구에서 주어진 층간면에서의 정확한 응력 해석은 복합재 적층판의 강도설계를 수행하는 초기 설계 툴로 사용할 수 있다.

• Composites Research
• /
• v.14 no.6
• /
• pp.38-46
• /
• 2001

In this study, An optimization code that can design microwave absorbing composite laminates is developed, and 3-layered microwave absorbing composite laminates are developed by optimizing the thickness of each layer. The layers are 3 different composite laminates. Many variables including lay-up angles of electromagnetically orthotropic composite layer can be considered in this code. The developed laminate is composed of an impedance matching layer of glass/epoxy fabric laminate, a glass/epoxy fabric laminate layer containing aluminum filler and carbon/epoxy fabric laminate layer. Permittivities of the materials are obtained using a network analyzer and a coaxial air line.

• Journal of Aerospace System Engineering
• /
• v.12 no.6
• /
• pp.50-57
• /
• 2018

This paper proposes the use of supports as passive vibration absorber to a composite solar panel for a high-agility satellite. We further defined the dynamic model of the composite solar panel with the help of the Ritz method and verified vibration suppression performance of the support by performing vibration analysis. Finally, this research ensures optimal design of the composite solar panel with the support for maximizing vibration suppression performance in limited mass. The proposed results of the optimal design can be applied in actual structural design of satellites.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.18 no.2
• /
• pp.191-200
• /
• 2005

To develop composite bridge deck, comparative study on the flexural characteristics of deck fabricated with filament winding and pultrusion was performed. In this study, composite deck of triangular shape was fabricated with filament winding process and flexural tests were conducted along with pultruded 'Duraspan' deck. Failure load, maximum deflection and strains were compared with each other. Also finite element analysis for filament winding deck was carried out and the results were compared with those from experiments.

• Composites Research
• /
• v.12 no.1
• /
• pp.47-58
• /
• 1999

This paper describes the results of experiments to analyze the free vibration of the laminated composite and hybrid composite plates with various shapes and boundary conditions. The materials of specimens were the carbon fiber reinforced plastic (CFRP), the glass fiber reinforced plastic (GFRP), the GFRP-Aluminum hybrid composite and the CFRP-CFRP hybrid composite. The natural frequencies and nodal patterns of plates with various shapes were experimentally obtained by impact exciting test using an impact hammer and an accelerometer. The experimental results were presented with normalized frequency parameters. The effects of composite material properties, fiber orientation angles, various geometrical shapes and boundary conditions on the vibration characteristics of composite plates were evaluated. To compare and verify these experimental results, the finite element analysis was carried out, and was well agreed with experimental results.

• Composites Research
• /
• v.24 no.4
• /
• pp.29-35
• /
• 2011

The characteristic length method used to determine a laminate's strength generally requires the test for un-notched and notched laminates and finite element analysis together. In this paper, the methods used to predict the stress distribution and tensile characteristic length of open-hole laminates using the stress concentration factor and equivalent material properties are proposed. These methods do not require data on the failure load of open-hole laminates or finite element analysis. Once the stress and characteristic length have been determined, the failure load of the open-hole laminate can be calculated. The proposed method considers the effect of the material properties as a parameter and therefore can be applied to a variety of materials. The stress distribution is verified by comparing with a finite element analysis and test results. The predicted failure load shows a maximum deviation of 8% from the test results.