• Proceedings of the Korea Society for Energy Engineering kosee Conference
• /
• 1994.05a
• /
• pp.64-77
• /
• 1994

현재 건설중인 3톤/일 규모의 석탄가스화기 운전제어를 위한 콘트롤시스템은 각종 하드웨어와 소프트웨어로 구성된다. 하드웨어는 운전자가 접하게되는 컴퓨터 화면(Operator Console), 운전 제어용 판넬(Hardwired Console), 본 시스템의 핵심인 콘트롤러(PLC; Programmable Logic Controller), 폭발성가스와 분진이 있는 환경하에서의 안전운전을 위한 본질안전 장벽(Intrinsic Safety Barrier) 및 운전정보 수집과 운전 제어를 위한 각종 전/계장품(Field Instrument) 등으로 구성된다. 본 시스템에 포함되는 소프트웨어에는 운전자와 콘트롤러간의 통신을 위한 운전제어화면(GUI;Graphical User Interface), 전체적인 제어를 위한 콘트롤로직(Control Logic)등이있다. 한편 각종 펌프 및 보일러 등 보조설비로의 전기공급을 위한 MCC(Motor Control Center)도 하나의 구성원이 된다. 본 논문은 석탄가스화 반응기의 운전에 관한 전반적인 검토와 콘트롤시스템을 구성하는 각 요소와 각각의 특징 및 그 개발 현황에 대한 검토를 그 내용으로 한다. 본 연구과제를 통해 제작, 설치될 석탄가스화기는 차세대 발전 시스템으로 주목을 받고있는 석탄가스화 복합발전시스템의 핵심부분으로, 본 반응장치의 제어에 관한 경험은 상용 규모의 석탄가스화 반응기에도 유사하게 적용될 것으로 기대된다.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.25 no.8
• /
• pp.646-650
• /
• 2012

Multifunctional structures with two kinds of materials have been intensively investigated in order to improve their electrical characteristic with two functions simultaneously. However, the research regarding of multifunctional ceramic sensor is still in a preliminary stage and how to integrate them with low-cost and high-yield mass production process remains a challenge issue. In this study, we fabricated the multifunctional ceramic sensor composed of temperature and gas sensors. Moreover, we investigated the CO sensing properties of three dimensional nanostuctured $Nb_2O_5$ thin film gas sensors fabricated with silica ($SiO_2$ nanosphere (${\O}$= 750 nm). Compared to plain films, the nanostructured films show enhanced gas sensing of greater sensitivity and a faster response. This result reveals that significantly increased sensitivity is an increase in the effective surface area for the adsorption of gas molecules.

• Superconductivity and Cryogenics
• /
• v.1 no.2
• /
• pp.14-20
• /
• 1999

초전도 재료는 선재의 형태로 가공하면 송전선이나 변압기, 발전기 그리고 전력 저장장치 등에 사용되어 전력계통의 효율을 극대화시킬 수 있는 재료로서 실제 응용 기기의 개발을 위해 많은 연구가 수행되고 있다. 더우기 1980년대 후반에 개발된 고온초전도 산화물 재료는 액체질수의 비등점인 77K 이상에서 초전도현상을 나타내어 초전도 현상의 응용에 대한 기대를 고조시켜 이에 대한 연구를 더욱 활성화시키고 있다. 초전도선재 연구는 그간 PIT(Powder in Tube) 공정을 이용한 Ag/Bi-2223(Ag/$Bi_2Sr_2Ca_2Cu_3O$) 선재가 높은 전기적 성질과 장선 가공상의 잇점으로 인해 많은 연구와 성과가 있었다. 그러나 Ag/Bi-2223선재는 강한 자기장 하에서 통전 능력이 현저하게 저하되는 성질 때문에 높은 자기장하에서 사용하기 위해서는 사용온도를 액체질소온도보다 상당히 낮은 20K 부근까지 낮추어야 한다는 점 때문에 전력기기 개발에 제한이 따르는 단점이 있다. 이에 반해 최근에 개발된 금속/YBCO 박막 복합선재는 높은 전기적 특성 이외에 특히 높은 자장에서도 통전 능력의 저하가 적어 제한 없이 전력기기의 모든 분야에 사용할 수 있는 특징이 있다. 따라서 1993년에 일본에서 Ni 금속기판에 물리적 증착방법으로 YBCO($YiBa_2Cu_3O$) 박막을 증착시킨 선재제조에 성공하고 있어 1996년에 Oak Ridge National Laboratories (ORNL)에서 Rolling Assisted Biaxially Textured Substrate (RaBiTS) 라는 집합조직을 형성시킨 금속기판이 개발되어 연속적인 가공의 가능성이 확인된 후 이의 특성향상 및 가공기술 개발을 위한 많은 연구가 수행되고 이다. 이 글에서는 이제 까지 개발된 금속기판을 사용한 YBCO계 초전도 박막형 선재의 제조기술 중에서 최근 가장 가능성 있는 것으로 평가되는 RABiTS 방법을 위주로 그 외에 IBAD와 ISD 방법에 관하여 소개하고 현재까지의 개발현황 및 앞으로의 전망에 대하여 간략하게 기술하고자 한다.

• Geophysics and Geophysical Exploration
• /
• v.27 no.3
• /
• pp.159-170
• /
• 2024

The bioreactor method, in which leachate is reinjected into a landfill for rapid decomposition and stabilization of buried waste, is being applied and tested at many landfills because of its numerous advantages. To apply the bioreactor method to a landfill successfully, it is very important to understand the behavioral characteristics of the injected leachate. In this study, electrical resistivity monitoring was performed to estimate the behavior of a landfill leachate in Korea where the bioreactor method was applied. For the electrical resistivity monitoring, a baseline survey was conducted in August 2013 before the leachate was injected, and time-lapse monitoring surveys were conducted four times after injection. The electrical resistivity monitoring results revealed reductions in electrical resistivity in the landfill attributable to the injected leachate, and the change in its characteristics over time was confirmed. In addition, by newly defining the electrical resistivity change ratio and applying it in this study, the spatial distribution and behavior of the leachate over time were effectively identified. More research on optimization of data acquisition and integrated monitoring methods using various techniques should be conducted in the near future.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2009.06a
• /
• pp.157-157
• /
• 2009

$BaTiO_3$를 기본조성으로 하는 PTC 써미스터는 Curie 온도이상에서 저항이 급격히 상승하는 반도성 전자세라믹스로서 degaussing 소자, 정온 발열체, 온도센서, 전류 제한 소자 등 상업적으로 폭넓게 사용되고 있다. 본 소자는 소결온도, 소결 및 열처리 분위기, 불순물, 첨가제 등의 제조공정상의 인자들과 기공률, 결정립 크기 등이 복합적으로 작용하여 PTCR 특성이 크게 영향을 받기 때문에 제조하기에 무척 까다로운 소자로 알려져 있다. 특히 과전류 보호 소자용으로 사용하기 위해서는 상온 비저항을 크게 낮추어야 하며 이에 대한 연구가 계속 진행되고 있다. 따라서 본 연구에서는 SiO2을 0.5~10 at%로 달리한 조성으로 환원 분위기에서 소결하고 공기 중에서 재산화 처리하여 재료의 PTC 특성에 어떠한 영향을 미치는지 분석하였다. 소정의 조성을 선택하여 $1180^{\circ}C{\sim}1240^{\circ}C$에서 2시간 동안 환원분위기에서 소결하고, $800^{\circ}C$에서 1 시간 공기 중에서 재산화 처리한 후 R-T 특성을 측정하여 SiO2 함량에 따른 PTC 특성을 분석하였다. 그 결과 SiO2의 함량이 증가할수록 상온 저항은 낮아지다가 3.0 at% 이상으로 첨가할 경우 급격히 상승하는 경향을 나타내었다. 특히 SiO2를 1.0~3.0 at% 일 때 우수한 PTC 특성을 가졌다. $1180^{\circ}C$에서는 소결 밀도가 낮아 상온 비저항이 크게 높았지만, $1200^{\circ}C{\sim}1220^{\circ}C$에서는 정상 입성장이 나타나면서 일반적인 PTC 특성을 가졌지만, $1240^{\circ}C$ 이상에서는 공정 액상이 형성되어 비정상 입성장이 일어나 상온 비저항이 크게 낮아졌다. 한편 점핑비-log(Rmax/Rmin)는 SiO2 함량이 증가할수록 높아지다가 3.0 at% 이상에서는 낮아짐을 확인하였다.

• Geophysics and Geophysical Exploration
• /
• v.5 no.2
• /
• pp.108-117
• /
• 2002

We have introduced a new approach to obtain the conductivity information of subsurface using Cagniard impedance over two-dimensional (2-D) model in the presence of horizontal magnetic dipole source with the frequency range of $1\;kHz\~1\;MHz$. Firstly, we designed the method to calculate the apparent resistivity from the ratio between horizontal electric and magnetic fields, Cagniard impedance, considering the source effects when the plane wave assumption is failed in finite source EM problem, and applied it to several numerical models such as homogeneous half-space or layered-earth model. It successfully provided subsurface information even though it is still rough, while the one with plane wave assumption is hard to give useful information. Next, through analyzing Cagniard impedance and apparent resistivity considering source effect over 2-D models containing conductive- or resistive-block, we showed that the possibility of obtaining conductivities of background media and anomaly using this approach. In addition, the apparent resistivity considering source effect and phase pseudosections constructed from Cagniard impedance over the isolated conductive- and resistive block model well demonstrated outlines of anomalies and conductivity distribution even though there were some distortions came from sidelobes caused by 2-D body.

• Geophysics and Geophysical Exploration
• /
• v.5 no.4
• /
• pp.299-308
• /
• 2002

We have derived an analytical expression for the sensitivity of the frequency domain small-loop electromagnetic (EM) surveys over a two-layer earth in order to estimate the depth of investigation with an instrument having the source-receiver separation of about 2 m. We analyzed the sensitivities to the lower layer normalized by those to the upper half-space and estimated the depth of investigation from the sensitivity analyses and the mutual impedance ratio. The computational results showed that the in-phase components of the sensitivity to the lower layer dominates those to the upper layer when the thickness of the upper layer is less than 20 m, while the quadrature components are not sensitive to the lower layer over the entire frequency range. Hence we confirmed that the accurate measurement of the in-phase component is essential to increase the depth of investigation in the multi-frequency small-loop EM survey. When conductive basement of 10 ohm-m underlies the upper layer of 100 ohm-m, an accurate measurement of the in-phase components ensures the depth of the investigation more than 10 m even accounting a noise effect, from which we conclude that the small-loop EM survey is quite effective in imaging the conductive plume down to a considerable depth. On the other hand, in the presence of the resistive basement of 1,000 ohm-m, the depth of investigation may not exceed 5 m considering the instrumental accuracy, which implies that the application of the small-loop EM survey is not recommended over the resistive environment other than detecting the buried conductor.

• Composites Research
• /
• v.29 no.4
• /
• pp.145-150
• /
• 2016

Polyvinylidene fluoride (PVDF) as a representative polymer with the piezoelectric property has been studied since the 1960s. Crystalline structure of poly(vinylidene fluoride) polymer is composed of five different crystal structure of the polymer as a semi-crystalline. Among the various crystal structures, ${\beta}-type$ crystal exhibits a piezoelectricity because the permanent dipoles are aligned in one direction. Generally ${\beta}-form$ crystal structure can be obtained through the transformation of the ${\alpha}-form$ crystal structure by the stretching and it can increase the amount through the after treatment as poling process after stretching. ${\beta}-form$ crystal structure the PVDF fibers produced by wet spinning is formed through a diffusion mechanism of a polar solvent in the coagulation bath. However, it has a disadvantage that the diffusion path of the solvent remains as pores in the fiber because the fiber solidification occurs simultaneously with the diffusion of the polar solvent. These pores play a role in reducing effect of poling process owing to effect of disturbances acting on the polarization by the electric field. In this work, the drying method using the microwave was introduced to remove more effectively the residual solvent and the pore within PVDF fibers produced through wet-spinning process and piezoelectric PVDF fibers was produced by transformation of the remaining ${\alpha}$ form crystal structure into ${\beta}-crystal$ structure through the stretching process.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.28 no.2
• /
• pp.123-130
• /
• 2015

This paper presents a new formulation for transient simulations of microwave propagation in heterogeneous unbounded domains. In particular, perfectly-matched-layers(PMLs) are introduced to allow for wave absorption at artificial boundaries used to truncate the infinite extent of the physical domains. The development of the electromagnetic PML targets the application to engineering mechanics problems such as structural health monitoring and inverse medium problems. To formulate the PML for plane electromagnetic waves, a complex coordinate transformation is introduced to Maxwell's equations in the frequency-domain. Then the PML-endowed partial differential equations(PDEs) for transient electromagnetic waves are recovered by the application of the inverse Fourier transform to the frequency-domain equations. A mixed finite element method is employed to solve the time-domain PDEs for electric and magnetic fields in the PML-truncated domain. Numerical results are presented for plane microwaves propagating through concrete structures, and the accuracy of solutions is investigated by a series of error analyses.

• Journal of Acupuncture Research
• /
• v.32 no.4
• /
• pp.213-226
• /
• 2015

Objectives : This study was aimed to show the effect of electroacupuncture combined with magnetic acupuncture on abdominal obesity without patient dieting, exercise or use of herbal medication. Methods : Women over 85 cm in waist circumference were treated with electroacupuncture combined with magnetic acupuncture. Acupuncture points were located at the abdomen ($CV_{12}$, $CV_6$, $ST_{25}$, $ST_{21}$, $SP_{15}$, $SP_{14}$), extremities ($LI_4$, $LI_{11}$, $ST_{36}$, $ST_{44}$) and were stimulated 30 minutes with 2.1~3 Gaus, 500 Hz, tolerable strength. The Interference wave forms were by Whata 153 (Medi Lab, Korea). Two or three treatment sessions per week (five or ten sessions in total) were done. Before treatment, and after the last treatment, we measured waist circumference, hip circumference, waist hip ratio, thickness of abdominal subcutaneous fat, body weight, body mass index, body fat ratio, visceral fat area, free fat mass, body fat mass and skeletal muscle mass. We also measured the subcutaneous temperature of the abdomen($CV_{12}$, $ST_{25}(Rt)$, $ST_{25}(Lt)$, $CV_6$) by using digital infrared thermal imaging(DITI). Results : In this study, significant reductions were shown in waist circumference, hip circumference, thickness of abdominal subcutaneous fat, body weight, body mass index, body fat ratio and body fat mass. There were no significant differences in waist hip ratio, free fat mass or skeletal muscle mass. There were also significant increases of the subcutaneous temperature on $CV_{12}$, $ST_{25}(Rt)$, $ST_{25}(Lt)$. Conclusions : From the above results, electroacupuncture combined with magnetic acupuncture might be an effective treatment for abdominal obesity.