• Proceedings of the Materials Research Society of Korea Conference
• /
• 2003.03a
• /
• pp.241-241
• /
• 2003

고체산화물 연료전지(Solid oxide fuel cell : SOFC)는 연료기체가 소유하고 있는 화학에너지를 전기화학반응에 의해 직접 전기에너지로 변화시키는 에너지 변환 장치이다. 고체산화물 연료전지의 특성은 인산형, 용융탄산염형 및 고분자연료전지 둥 다른 연료전지에 비해 효율이 높고 공해가 적으며, 연료개질기가 필요 없고 복합발전이 가능하다. 그러나 작동온도가 고온(100$0^{\circ}C$)이어서 연결재 및 전지의 구성요소가 고가이고 전류집전 및 밀봉 둥 문제점을 가지고 있다. 전극 지지체식 연료전지의 개발은 얇고 치밀한 전해질 제조를 가능하게 하여 낮은 저항을 가지기 때문에 저온에서 작동을 용이하게 하여 고온작동시의 문제점을 해결하기 위한 방안으로 박막제조공정에 대한 연구가 많이 이루어지고 있다. 또한 전지성능을 향상시키기 위해 전기화학적 반응면적과 가스 확산층을 넓게 하기 위한 기공률이 높고 전기전도도가 우수한 지지체 제작에도 많이 연구가 이루어지고 있다.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.8 no.5
• /
• pp.469-475
• /
• 1984

In dual phase steel composed of martensite and ferrite which are different in deformation behavior, the quantitative estimation of fracture toughness is investigated by the R-curve method and the stretched zone method of JSME Sool. In the homogeneous material J$_{IC}$ value measured by the R-curve method and the stretched zone method are almost equivalent each other, but in the inhomogeneous material J$_{IC}$ value by the stretched zone method is overestimated than that by the R-curve method. Such a overestimation for the J$_{IC}$ is due to the continuous plastic blunting of ferrite after the stretched zone width in martensite reached critical value which overmeasures the critical stretched zone width.width.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.15 no.3
• /
• pp.944-953
• /
• 1991

본 연구에서는 일반적인 이방성재료에 대한 코스틱방법의 적용을 검토하는 일 환으로서, 직교이방성재료중 특성방정식의 근이 동일함으로 인하여 균열의 응력장이 특이성을 갖게 되고, 따라서 지금까지는 코스틱법의 적용이 어려웠던 재료(의사등방성 재료)에 대하여, 코스틱상 및 초기곡선의 식을 이론적으로 구하였고, 이 식을 예상되 는 여러가지 경계조건 하에서 컴퓨터 그래픽(computer graphic)으로 가시화하여, 시편 제작의 어려움으로 인하여 실험이 곤란한 의사등방성재료의 코스틱상을 예시하였으며, 또 이들 재료에 대한 응력확대계수 산출법을 제시함과 동시에 이 산출법이 등방성 재 료 및 일반적 직교이방성재료에도 사용가능함을 밝혀 다음 제2부에서 실험을 통하여 검증되도록 하였다.

• Journal of Energy Engineering
• /
• v.26 no.1
• /
• pp.1-8
• /
• 2017

This study was carried out to physicochemical properties and free CaO contents of coal ash in domestic circulating fludized bed combustion power plant using ethylene glycol method. Results of physicochemical properties, there are many differences in CaO contents for the region position in CFBC plant. The reason, It is considered to be reflected that regulation of exhaust concentration for oxides of sulfur and other operation characteristics of region position in CFBC plant. Free CaO contents are 1.96 ~ 10.78% of fly ash and 0.07~4.24 % of bottom ash, fly ash is higher than in the bottom ash. besides CaO contents of raw materials, particle distribution have a lot of influence Free CaO contents.

• Journal of Digital Convergence
• /
• v.15 no.5
• /
• pp.117-128
• /
• 2017

This study aims to propose measures to consistently induce Chinese tourists who represent the largest percentage of inbound tourism from foreign countries, utilizing raw data of 2015 Korea International Visitor Survey conducted by the Korea Culture & Tourism Institute under the Ministry of Culture, Sports and Tourism. Differences and influence factors for overall satisfaction on travel in Korea, intention to revisit Korea, and intention to recommendation were analyzed by demographic characteristics and tourism characteristics of Chinese consumers. As a result of analysis study, it came out that there are differences between overall satisfaction on travel in Korea and intention to revisit Korea by age and job of demographic characteristics. Among the tourism characteristics, there are differences in intention to revisit Korea depending on purpose of travel, intention to revisit Korea and recommendation according to route of travel information search, and there are differences in all three categories according to type of travel. The most important factor of all three category was identified as 'Food' factor and the second most influential factors were immigration procedures, security, and tourist attractiveness. It is suggested that more active research and improvement efforts are needed in the government, industry, and academia in order to attract Chinese tourists in the future.

• Journal of the Korean Electrochemical Society
• /
• v.6 no.1
• /
• pp.6-12
• /
• 2003

Plasma carbon black(PB) which prepared by plasma pyrolysis of methane was treated at 800, 1300 and $2100^{\circ}C$ under $2\times10^{-2}$ torr. Four different samples including raw PB were added to $LiCoO_2$, cathode active material of lithium secondary battery, to investigate effects of properties of plasma black as conductors on electrochemical characteristics. Based on our experimental results, PB conductors with low amount of surface functional groups and high electrical conductivity enhanced the cyclability and the initial discharge capacity. However, deterioration of rate capability and cyclability were observed (or the plasma black treated at $2100^{\circ}C$ For the plasma black conductor prepared from plasma pyrolysis, the effects of properties of carbon black on electrochemical characteristics were combined results of changes in electrical conductivity and structural properties such as agglomeration of plasma black. The conductivity of plasma black increased with treatment temperature, while dispersion of plasma black decreased. As a result, the high cyclability of cell was observed at $800^{\circ}C$ of heat treatment temperature.

• Applied Chemistry for Engineering
• /
• v.9 no.1
• /
• pp.135-140
• /
• 1998

The constituents of deposits on paper machine and holes/spots in paper have been analyzed by a combination of analytical techniques, such as FTIR, Py-GC-MS, and EDS. FTIR spectroscopy was used prior to Py-GC-MS and EDS analysis, as a preliminary analysis. The analysis of organic components was carried out with a pyrolysis unit connected to a GC-MS, and inorganic components in ash were analyzed by SEM equipped with an EDS analyzer after pyrolysis at $590^{\circ}C$. The deposits on the dryer section were complex pitch, which was the mixture of the organic components of fatty acid ester and starch, and the inorganic components of talc, clay, and calcium carbonate. The complex pitch was estimated to come from the coated broke. We knew the deposits on the metering rod of sym-sizer were associated with the interaction of unstable alkyl keten dimer(AKD) and $CaCO_3$. The compositions of holes or spots varied considerably and were associated with chemical interaction within the system. The holes, spots, and blotches in the finished paper were PE and PP from pulp sources, complex pitch that were caused by the interaction of the different additives in the system, polymer such as flexible PVC that was used for the prop of palette, and hot melt as adhesives that came from the inadequate handling of broke. In addition, we identified that poly(caprolactam) which is used for forming fabrics or press felts, could be mixed with the raw materials by accident and results in streaks on coating.

• Journal of the Korea Institute of Building Construction
• /
• v.16 no.2
• /
• pp.97-105
• /
• 2016

Recently, application case of the ultra rapid hardening concrete-polymer composite(URHCPC) are increasing to repair for the deterioration of pavement. But it is a major disadvantage that the main material is expensive and has environmental load. For these reasons, the development of the economic, eco-friendly materials is needed. Calcium Aluminate Composite (CAC), produced by rapid cooling of atomizing method with molten ladle furnace slag, is a material capable of improving the economic feasibility and reducing the environmental load of URHCPC. In this paper, the properties of CAC and gypsum mixed CAC (GC) as alternative materials of RSC according to the types of polymer dispersion were studied. The results were as follows; compressive strength, tensile strength, flexural strength, bonding strength and modulus of elasticity of the composites using CAC or GC showed higher values than those of plain proportion in 3 hour. In later age, they were at the same level as the general proportions. URHCPC using BPD as polymer dispersion had superior strength properties generally. But modulus of elasticity was the same level as the case of using a SBR latex. According to these results, CAC or GC can partially substituted for RSC to product the URHCPC. When URHCPC uses the BPD as the polymer dispersion, it can be improved performance.

• Journal of Digital Convergence
• /
• v.10 no.3
• /
• pp.241-250
• /
• 2012

Low birth rate is a persisting national challenge that causes a decrease in productive population and an increase in encumbrances by ever rising insurance premiums, eventually threatening the existence of the country. This study investigated the effectiveness of the current government's undergoing economic support of the child-birth promotion policy, "go-un-mam card", and suggested improvement plans about the problems derived on the basis of the perceptions of the card users. Multi-response analysis was used to find out the preference of the policy, and chi-square test was conducted to discover the user satisfaction rate and intent of re-parturition. Also, descriptive analysis was performed to identify the degree of the policy recognition. The results illustrated that a significant association exists between the satisfaction rate and the intention of re-parturition. In addition, pregnant women gained information about the policy from governmental agencies and medical institution as well as by word of mouth; then, applied to the policy. Also, the card users only took an advantage of discounts in the hospitals within the supported monetary amounts. Moreover, the card users expressed their dissatisfaction at the monetary amounts. For instance, the users were dissatisfied with the limit on the amount to be used in a day and requested upgrade on the monetary amounts. Based on the result, the government will improve and develop the go-un-mam card for the ultimate purpose of policy, increasing birth-rate.

• Journal of the Korea Institute of Building Construction
• /
• v.9 no.4
• /
• pp.63-73
• /
• 2009

Recently, the use of lightweight panels in building structures has been increasing. Of the various lightweight panel types, styrofoam sandwich panels are inexpensive and are excellent in terms of their insulation capacity and their constructability. However, sandwich panels that include organic material are quite vulnerable to fire, and thus can numerous casualties in the event of a fire due to the lack of time to vacate and their emission of poisonous gas. On the other hand, lightweight foamed concrete is excellent, both in terms of its insulation ability and its fire resistance, due to its Inner pores. The properties of lightweight concrete is influenced by foaming agent type. Accordingly, this study investigates the insulation properties by foaming agent type, to evaluate the possibility of using light-weight foamed concrete instead of styrene foam. Our research found thatnon-heating zone temperature of lightweight foamed concrete using AP (Aluminum Powder) and FP (animal protein foaming agent) are lower than that of light-weight foamed concrete using AES (alkyl ether lactic acid ester). Lightweight foamed concrete using AES and FP satisfied fire performance requirements of two hours at a foam ratio 50, 100. Lightweight foamed concrete using AP satisfied fire performance requirements of two hours at AP ratio 0.1, 0.15. The insulation properties were better in closed pore foamed concrete by made AP, FP than with open pore foamed concrete made using AES.