• Journal of fish pathology
• /
• v.30 no.2
• /
• pp.89-96
• /
• 2017

The majority of freshwater ornamental fish are imported and distributed domestically, causing high risk of exposure to exotic pathogens and drug resistant bacteria in Korea. Aeromonas hydrophila is known as a common species of fresh water bacteria and opportunistic fish pathogen, as well as a species causing zoonotic infection. In this study, we isolated motile aeromonads from various imported freshwater ornamental fish and studied the characters of the isolates. Imported freshwater ornamental fish were purchased on day 1 after the fish were deposited in the aquarium. Bacteria were isolated from the liver, kidney and spleen of fish using 0.5% NaCl containing tryptic soy agar medium. Bacteria were grouped on the basis of their morphological characteristics. The colonies with clear zone on starch-ampicillin agar (SA agar) were tentatively identified as Aeromonas spp. Two hundred and twenty-six strains, about 70% of total isolates were assumed to be Aeromonas spp. Nine isolates were further identified based on the result of the API 20E test and PCR using primers specific for A. hydrophila 16S rRNA gene. The isolates were identified as A. hydrophila and the API 20E test showed differences in trisodium citrate, D-sucrose, D-melibiose, amygdalin and L-arabinose availability between the nine isolates and standard A. hydrophila. The susceptibilities of the isolated bacteria to 10 antibacterial agents were confirmed by the disk diffusion method. Isolated strains were found to be resistant to amoxicillin and ampicillin and sensitive to florfenicol. However, 7 isolates showed multiple drug resistances to erythromycin, oxytetracycline, nalidixic acid etc. Pathogenicity of the isolates was determined by the artificial challenge test on goldfish (Carassius auratus). Three isolates caused 60 ~ 80% mortality in goldfish within 5 days after the initiation of challenge. These results indicate that multiple drug resistant, highly pathogenic and exotic A. hydrophila can spread to domestic aquarium and the preventive treatment of fish before sale is necessary.

• Journal of architectural history
• /
• v.10 no.4 s.28
• /
• pp.77-92
• /
• 2001

현대의 건축시기는 다원성의 시기 또는 복합성의 시기라고 불리운다. 모더니즘과 포스트모더니즘의 시기를 거치며 다양한 형태적 실험의 과정을 겪었고 수많은 이데올로기와 이론들로 무장된 논쟁의 역사도 갖게 되었다. 이러한 현대건축의 다양성은 건축디자인이라는 전문직의 사회에 기여하는 역할을 반추(反芻)함과 동시에 다변하는 인간사고의 역동성을 반영하고 있다. 건축관련 책자나 저널 등에서 흔히 발견할 수 있는 Neo-Classicism, Deconstructivism, Minimalism, High-Tech, New Moderns 등등의 건축양식들은 스타일을 지칭하는 언어라기보다는 건축적 사고를 지칭하는 언어라고 할 수 있다. 결국 건축디자인이라는 작업은 인간을 둘러 싼 건조환경의 생성에서 출발하는 것이므로 건축적 사고방식은 그 시기의 사회현상과 밀접한 관계를 맺게 된다. 20세기 말부터 불어닥친 디지털 문화의 사회변혁은 전 세계를 하나의 채널로 엮게 되었고, 이러한 영향들은 지역과 민족, 그리고 종교적인 요소들까지도 혼합하여 국경을 초월한 미래의 새로운 이상들을 꿈꾸게 되었다. 19세기 산업혁명과 함께 급속히 벨라진 인류문명의 진보는 필수적으로 세계화를 동반하는 것이고, 세계화와 지역성사이의 괴리를 통해 나타나는 문화적 비판과 충돌은 아직도 진행상태인 것이다. 세계화라는 통염은 문명의 보편성을 기반으로 하며 전통문화의 파괴가 뒤따를 수밖에 없는데, 현재와 같이 IT혁명을 통해 급속도로 빨라진 세계문화의 교류는 한 국가가 뿌리를 내리고 있는 문화적 유산이라는 토양을 포기하여야 할 단계에 와 있다고 논평할 정도이다. 여기서 건축은 문화적 상징으로 작용하게 되는데, 그것이 심미적이든 관습적이든 또는, 경제적이든 건축가는 해답의 제시라는 임무에 직면하게 된다. 20세기에 진행된 모더니즘의 건축은 구조와 공간에 대한 고전건축의 숙원을 고덕건축이 이룬 것처럼 15세기 르네상스 시대로부터 진행된 형태와 공간, 기능, 그리고 아름다움과 기술(technology) 또는 경제성 등에 대한 건축적 의문과 탐구를 일단락지었다고 할 수 있다. 이러한 모더니즘의 한복판에 Mies van der Rohe라는 거장이 깊은 발자국을 남기며 한 시대를 이루었고 그가 남긴 시대정신의 이념과 가치를 Miesianism이라고 부른다. 실용성과 도덕성을 근본으로 하는 Miesianism은 대중에 호소하는 미적 표현주의를 부정하고 지역정서를 중시하는 문맥적 접근방식을 경시함으로써 보편화라는 현상을 불러일으킨 국제주의 양식의 한 부류로 비판을 받아왔다. 즉, Miesianism의 단순하고 강렬한 외형적 요소는 그것이 내포하는 기술적 합리성이나 공간적 완결성을 무시한 채 전 세계에 영향을 미쳤고 동시에 지역적 저항을 받게 되었다. 시카고 및 전 세계의 Miesian들, 즉 Mies van der Rohe의 제자들이나 그로부터 영향을 받은 수많은 건축가들은 이러한 저항과 비판에 직면하게 되며 새로운 사고의 시대적 요구 앞에 고뇌하게 된다. 한국에서는 1978년 Mies van der Rohe의 제자인 김종성이 미국에서 서울로 돌아와 '서울건축컨설탄트'를 설립하며 본격적으로 Miesianism의 규범적 건축론을 설파하기 시작하였다. 이른바 시카고 국제주의학파의 건축전수라고 할 수 있는데 '서울건축컨설탄트'를 통하여 배출된 김종성의 제자들은 명쾌하고도 간결한 건축해법의 경험을 토대름대로의 정체성을 갖고자 노력하였으나 결국 다원적 가치를 요구하는 시대적 흐름 속에 혼란을 겪고 있는 것 또한 사실이다. 본 연구는 Miesianism의 기원을 밝히고 그것의 실수와 오류를 밝힘과 동시에 현대의 여러 가지 건축유형들과 비교하여 봄으로써 Post-Miesianism의 실체와 그 미래에 대하여 고찰하여 보고자 한다. 미스의 유산이라고 할 수 있는 Miesianism의 요체는 첫째, Schinkel로부터 이어받은 시대정신의 사명감, 둘째, Berlage가 전해준 전문가로서의 도덕성을 바탕으로 하여 이루어진 기술적 합리성의 실현, 그리고 마지막으로 그 당시의 추상예술에 대한 이해로써 받아들인 nee-Suprematism의 아방 가르데적인 자세라고 할 수 있다. 그러나 이것들을 전파하고 수용하는 과정에서 미스적인 단순하고 명쾌한 외관이 더욱 강한 인상을 남기게 되었고 또한 미스가 현대성의 본질이라고 믿는 기술의 전수는 모든 외관을 동일하게 만드는 International Style로서의 보편적 획일성을 초래하였다. Mies van der Rohe의 강력하고 규범적인 dogma는 그의 제자들에게는 강렬한 카리스마로 각인되었고, Mies가 원한 것이 아닐지라도 그들을 하나의 틀 속에 가두는 영향력을 행사하였다. 2세대이든 3세대이든 기술적 합리성과 추상적 단순미라는 믿음을 맹목적으로 추종할 때 그들은 Miesian으로 남아있게 되며, 거기서 벗어났을 때 non-Miesian, 또는 배신자로 취급하기까지 하였다. 이것은 미스의 제자들에게 강한 족쇄가 되어 형태적 또는 개념적 변화의 시도를 어렵게 하였고 시대적 요구에 부응하지 못한다는 평가에 이르게 되었다. 문화의 다양성과 역동성을 인정함과 동시에 Miesianism에 대한 새롭고 시대에 적합한 해석을 기대하게 되는데, 이러한 기대 속에서 우리는 Post-Miesianism이라는 새로운 유형을 엿볼 수 있게 된다. Post-Miesianism의 징후를 현대의 다양한 건축유형에서 발견할 수 있는데, High-Tech의 구축적이고 정밀한 건축 기술적 해법과 Minimalism의 반복성을 통한 추상미의 표현 등에서 뿐만이 아니라 Post-Modernism의 인간성의 추구나 문맥적 고려, 또는 해체주의의 형이상학적이고 아방가르데적인 실험주의 정신까지조차 Post-Miesianism이 공유할 수 있는 부분이 있다고 보여진다. 또한, 미스의 영향이 2세대, 3세대의 건축가들에게 미치면서 여러 방향으로 변질되어 가는 것을 우리는 발견할 수 있으며 그러한 시대성에 적응하는 시도들이야말로 새로운 미래를 향한 Post-Miesianism의 실체인 것이다. Mies가 말하였듯이 한 시대의 끝은 그 시대가 완전히 이해되었을 때이며, 모더니즘의 숙제는 아직 해결되지 않았으므로 Miesianism의 탐구는 Post-Miesianism이라는 새로운 주제로 계속될 것이다. 이를 통하여 21세기 디지털 문명의 시대 속에서 현대건축이 안을 수밖에 없는 보편성과 지역성의 충돌이라는 문제의 해결에 한 발걸음 다가갈 수 있기를 기대하여 본다.

• Korean Journal of Plant Resources
• /
• v.10 no.2
• /
• pp.175-182
• /
• 1997

This study was carried out to investigate the effect of several organic fertilizers on the growth characteristics, root yield and the levels of the efficacious constitutents saikosaponins in Bupleurum falcatum L. in the field of Chonnam RDA. Naju, 1994. Five organic fertilizers were used ; rice straw manure(RSM), rice straw(byproduct of mushroom)manure[RS(BM)M], pig-dropping sawdust manure(PSM),poultry manure(PM)and sawdust(byproduct of mushroom) manure[S(BM)M]. The results were summarized as follows ; The chemical properties, such as organic matter, available phosphate, $K_2O$, CaO, and MgO of soil were increased on all plots with the addition of organic fertilizers, specifically in PM+RS(BM)M application. PM+RS(BM)M treatment was higher in emergence rate and better in the growth charaters of shoot, root parts of plants than those of conventional fertilization and the highest dried root yield resulted from using 39% PM+RS(BM)M treatment. Thus, the organic constituents of the plant leaves were affected in the same ways by all treatments, but the T-N, $P_2O_5$, $K_2O$, CaO and MgO contents of the roots were highly increased in PM+RS(BM)M treatment, also the total saikosaponin levels in the roots increased with different organic fertilizers in the following order : 1.70% in PM+RS(BM) treatment, 1.66% in RS(BM) treatment, and 1.57% in RSM+N-P-K treatment. There were significant positive correlation observed between the growth characters of shoot, root parts of plants, yield and contents of T-N, $P_2O_5$, $K_2O$, total-saikosaponin in B. falcatum roots.

• Korean Journal of Plant Resources
• /
• v.8 no.1
• /
• pp.81-88
• /
• 1995

This expreiment was carried out to investigate the effect of mulching matreial on the yield and yield characters in the cultivation of Fritillaiae. Bulbus. Soil temperature was in mulching treatments than non-mulching, and water contentment of soil was higher in mulching. with compost rice straw and black P.E(Poly Ethylene). but was in mulching with black and white P.E than non-mulching. Emergence data had no differences among mulching treatments, and plant height was longer about 4 to 7cm in mulching with compost and 30% shade net than non-mulching but was shortest as 41cm in mulching with black and white P.E. Comparing lear numbers with numbers with mulching treatments. mulchings with 30% shade net was smaller. and black and white P.E. black P.E. and green P.E were larger than that of non-mulching. Total yield was increased about 8 to 11% in mulching with compost. black P.E. and green P.E and yield of thing quality was more increased about 51 to 64% in mulching with compost. black P.E. and green P.E. thand non-mulching.

• Economic and Environmental Geology
• /
• v.34 no.1
• /
• pp.133-146
• /
• 2001

We report the results of structural field observation and measurement of anisotropy of magnetic susceptibility (AMS) of the diamictitic Hwanggangri Formation distributed in Chungju-Suanbo area of the Okchon Belt, Korea. The outcrops of the Hwanggangri Formation show two types of cleavage in general: slaty cleavage (SI) and crenulation cleavage (5z). 5] cleavage is, however, well observable only in the notheastem (NE) part of study area, while overwhelmed by 52 cleavage in the southwestern (5W) part, indicating stronger later deformation in 5W part of the study area. This partitioning of the study area is corroborated by both IRM and AMS parameters: NE part of the study area is characterized by higher IRM intensity, higher bulk magnetic susceptibility, higher AM5 degree, and by oblate shape of magnetic susceptibility ellipsoid. Their values become drastically lowered toward southwest, and reach to a stable minimum in the whole 5W part of the study area. In addition, degree of both metamorphism and deformation tends to increase gradually from northeast toward southwest and also from northwest toward southeast in the study area. Based on the distribution pattern of the principal axes ( $k_1, k_2, k_3$ axes) of magnetic anisotropy ellipsoids revealed in the NE part of the study area, three episodes of deformation ( $D_1, D_2, D_3$ ) are recognized: D_1$ deformation produced $S_2$ cleavage with NE-5W trend, which is caused by a strong NW-SE tlattening of a coaxial pure shear. $D_2$ deformation produced 5z cleavage characterized by a non-coaxial deformation. It was caused by a ductile or semi-ductile thrusting toward NW and concurrent sinistral shearing along $S_2$ cleavage plane. Lastly, $D_3$ deformation produced tlexural folding of all previous structures with a nearly horizontal NE fold axis. Distribution pattern of the principal axes of magnetic anisotropy ellipsoid from the SW part of the study area, on the other hand, does not show any coherency among sites or samples. We interpret that this dispersed pattern of $k_1, k_2, k_3$ axes together with lower anisotropy strength indicates that magnetic fabrics in the SW part have been disturbed either by a superposition of strong deformation/metamorphism or by a kind of reciprocal strain due to an overlapping of $D_1$ and $D_2$ or by both processes.

• Economic and Environmental Geology
• /
• v.30 no.2
• /
• pp.137-142
• /
• 1997

At the tailings dam of the disused Brukunga pyrite mine in South Australia, reaction of groundwater with the tailings causes the formation and discharge of sulphuric acid. There is a need to improve remediation efforts by decreasing groundwater flow through the tailings dam. Geophysical methods have been investigated to determine whether they can be used to characterise variations in depth to watertable and map preferred groundwater flow paths. Three methods were used: transient electromagnetic (TEM) soundings, direct current (DC) soundings and profiling, and self potential (SP) profiling. The profiling methods were used to map the areal extent of a given response, while soundings was used to determine the variation in response with depth. The results of the geophysical surveys show that the voltages measured with SP profiling are small and it is hard to determine any preferred channels of groundwater flow from SP data alone. Results obtained from TEM and DC soundings, show that the DC method is useful for determining layer boundaries at shallow depths (less than about 10 m), while the TEM method can resolve deeper structures. Joint use of TEM and DC data gives a more complete and accurate geoelectric section. The TEM and DC measurements have enabled accurate determination of depth to groundwater. For soundings centred at piezometers, this depth is consistent with the measured watertable level in the corresponding piezometer. A map of the watertable level produced from all the TEM and DC soundings at the site shows that the shallowest level is at a depth of about 1 m, and occurs at the southeast of the site, while the deepest watertable level (about 17 m) occurs at the northwest part of the site. The results indicate that a possible source of groundwater occurs at the southeast area of the dam, and the aquifer thickness varies between 6 and 13 m. A map of the variation of resistivity of the aquifer has also been produced from the TEM and DC data. This map shows that the least resistive (i.e., most conductive) section of the aquifer occurs in the northeast of the site, while the most resistive part of the aquifer occurs in the southeast. These results are interpreted to indicate a source of fresh (resistive) groundwater in the southeast of the site, with a possible further source of conductive groundwater in the northeast.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.33 no.3
• /
• pp.510-521
• /
• 2006

This investigation was undertaken to examine the extent to which tooth size and arch dimension each contribute to dental crowding. The sample included 50 subjects with well aligned dentition (25 males, 25 females) and those of 40 subjects with gross dental crowding(20 males, 20 females). Plaster model and digital model made from alginate impression taken at the one visit. Tooth size, arch length, arch perimeter, intercanine width and intermolar width was measured on the plaster and digital models. The findings in this study lead to the following conclusions. 1. In maxilla, the mesiodistal diameters of lateral incisor and premolars of the crowded group were significantly larger than those of the normal occlusion group (P<0.05). 2. In mandible, the mesiodistal diameters of central incisor, canine and premolars of crowded group were significantly larger than those of the normal occlusion group (P<0.05). 3. In maxilla, arch perimeter and intermolar width of crowded group were significantly smaller than normal occlusion group but intercanine width of crowded group were larger than normal occlusion group (P<0.05). There was no significantly difference in arch length (P>0.05). 4. In mandible, arch perimeter of crowded group was smaller than normal occlusion group(P<0.05). There were no difference in arch length intermolar width and intercanine width (P>0.05) 5. In the analysis of correlation coefficients of arch length discrepancy with variables, arch perimeter, intermolar width and mesiodistal width of 2nd premolar showed positive correlations in maxilla. 6. There was a significant difference between tooth width measurements made by the 2 methods, with all the digital model measurement larger than plaster model measurements (P<0.05) : the magnitude of the differences does not appear to be clinically relevant. 7. In the analysis for reproducibility, the plaster model measurement was showed lower degree of correlation between 1st and 2nd measurement than digital model.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.30 no.2
• /
• pp.229-237
• /
• 2003

The purpose of this study was to compare the effect of exposure time on the polymerization of surface and 2 mm below the surface of light-cured restorative materials cured with three different light sources; conventional halogen light curing unit(XL 3000, 3M, U.S.A.), plasma arc light curing unit(Flipo, LOKKI, France) and light emitting diode(LED) light curing unit(Elipar Free light, 3M, U.S.A.) and compare the uniformity of polymerization from the center to the periphery of resin surfaces according to polymerization diameter cure with three different light sources. From the experiment, the following results were obtained. 1. In Z-100, Plasma arc light exposure time of 6 to 9 seconds and LED light exposure time of 40 to 60 seconds produced microhardness values similar to those produced with 40 second exposure to a conventional halogen light(p>0.05). 2. In Tetric Flow, Plasma arc light exposure time of 9 seconds and LED light exposure time of 40 to 60 seconds produced microhardness values similar to those produced with 40 second exposure to a conventional halogen light(p>0.05). 3. In Dyract AP, Plasma arc light exposure time of 6 to 9 seconds and LED light exposure time of 20 to 40 seconds produced microhardness values similar to those produced with 40second exposure to a conventional halogen light(p>0.05). 4. In Fuji II LC, Plasma arc light exposure time of 9 seconds and LED light exposure time of 20 to 60 seconds produced microhardness values similar to those produced with 40second exposure to a conventional halogen light(p>0.05). 5. Except Fuji II LC, microhardness was decreased from the center to the periphery in all light sources(p<0.05).

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.42 no.8
• /
• pp.1227-1235
• /
• 2013

This study was conducted in order to investigate the quality characteristics and antioxidant activities of dry noodles with addition of sorghum (Sorghum bicolor L. Moench) flour from glutinous and non-glutinous varieties. The sorghum varieties used in this study were glutinous 'Hwaggumchal' and non-glutinous 'Donganme', and the contents added to noodles were 'Hwaggumchal' 5%, 'Hwaggumchal' 10%, 'Donganme' 5%, and 'Donganme' 10%. The turbidity of soup of cooked noodles was increased by addition of sorghum flour. The cooking loss of 'Hwaggumchal' flour added noodles (HFN) was greater than that of 'Donganme' flour added noodles (DFN), reflecting endosperm characteristics. Phenolic compounds such as polyphenol, flavonoid, and tannin contents and antioxidant activity of sorghum flour added noodles were increased in proportion to the amounts of added sorghum flour. In the added varieties, DFN showed greater amounts of phenolic compounds and higher levels of DPPH and ABTS radical scavenging activities than HFN. The DPPH and ABTS radical scavenging activities of 5~10% DFN were increased by 4.6~6.2 fold and 10.5~13.4 fold, respectively, compared to non-added noodles. Regarding cooking effects, DPPH and ABTS radical scavenging activities of sorghum flour added noodles were increased by 10.9~11.2% after cooking. In sensory evaluation, color and appearance value were highest in HFN, and no differences in taste and overall acceptability were observed among treatments.

• Journal of Bio-Environment Control
• /
• v.22 no.2
• /
• pp.167-174
• /
• 2013

Six kinds of sprout vegetables were applied three and six types of non-perforated breathable propylene films (NPB film) for individual and mixed modified atmosphere (MA) package condition at $10^{\circ}C$ on this study. As a tah tasai, kohlrabi, rape, chinese cabbage, red radish, broccoli sprouts were packaged by 20,000, 60,000, and 100,000 $cc{\cdot}m^{-2}{\cdot}day{\cdot}atm$ non-perforated breathable films for seven days storage. Mixed sprout vegetables were used 20,000 cc, 40,000 cc, 60,000 cc, 80,000 cc, and 100,000 $cc{\cdot}m^{-2}{\cdot}day{\cdot}atm$ non-perforated breathable films for seven days storage. Loss rate of fresh weight, changes of carbon dioxide, oxygen, and ethylene gas concentration were measured during the storage. Visual quality and off-flavor were rated by panel tests after seven days storage. Each sprout vegetable storage with film tests had been shown under the 0.5% fresh weight loss in every packaged films, and the 20,000cc NPB film package had been suitable atmosphere condition in the carbon dioxide and oxygen gas concentration. Appearance and off-odor of sprouts packaged with 20,000cc NPB film were shown better than other films because of the proper gas movement through the film to outside during the storage. Fresh weight loss of the mixed sprout vegetables had no difference among the NPB films for seven days storage. The 20,000 cc film had been resulted in that exchange rate of carbon dioxide and oxygen was highest cause of low film permeability than sprouts respiration. But the film is not good for storage because it has been made poor value of off-order even showed high visual quality from panel test after storage. 40,000 cc and 60,000 cc non-perforated breathable films were more suitable for mixed sprout vegetable storage at $10^{\circ}C$. These result suggested that 20,000 cc NPB film was good for single packaged sprout vegetable and 40,000 cc and 60,000 cc non-perforated breathable films were good for mixed packaged sprout vegetable.