• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2003.06a
• /
• pp.1174-1177
• /
• 2003

In this study, to achieve the optimal conditions for mechanical hyper-fine pattern fabrication process, deformation behavior of the materials during indentation was studied with numerical method by ABAQUS S/W. Polymer (PMMA) and brittle materials (Si, Pyrex glass) were used as specimens, and forming conditions to reduce the elastic recover and pile-up was proposed. The indenter was modeled a 3D rigid surface. Minimum mesh sizes of specimens are 1-10nm. Comparison between the experimental data and numerical result demonstrated that the finite element approach is capable of reproducing the loading-unloading behavior of a nanoindentation test. The result of the investigation will be applied to the fabrication of the hyper-fine pattern.

• Proceedings of the Korean Society of Soil and Groundwater Environment Conference
• /
• 2004.09a
• /
• pp.63-67
• /
• 2004

A field pilot study on remediation of diesel-contaminated soil by hot air injection/extraction process constructing soil piling system was conducted to evaluate the effects of hot air on the removal of diesel and each constituent. After the heating process of 2 months, the equilibrium temperature of soil reached to 10$0^{\circ}C$ and soil TPH concentration was reduced to about 72% against the initial concentration. Additional extraction process of 2 months induced the continuous extraction of residual diesel and the increment of microbial activity, which made soil TPH concentration reduced to 95%. In addition biological removal of non volatile constituents in diesel was verified indirectly and the removal pattern of each DRO(diesel range organic) as soil temperature was explained.

• Proceedings of the Korean Society of Soil and Groundwater Environment Conference
• /
• 2006.04a
• /
• pp.162-165
• /
• 2006

유해성 유기물질로 오염된 토양의 복원을 위한 토양세척공정에서 계면활성제를 선택적으로 재이용하기 위해 활성탄을 이용한 흡착 칼럼의 성능을 평가하였다. 계면활성제로는 Triton X-100을 소수성 유해 유기물질로는 다환방향족 탄화수소의 하나인 phenanthrene를 사용하여 그 성능을 평가하였다. 계면활성제의 흡착은 phenartthrene에 비해 빠른 흡착 특성을 보였으며 phenanthrene은 계면활성제의 포화흡착상태에서도 지속적으로 흡착이 이루어졌다. 이는 계면활성제의 흡착이 종료된 이후에도 유해성 유기물질의 지속적인 흡착을 기대할 수 있어 계면활성제의 지속적인 재이용과 활성탄 사용시간의 증대를 가져올 수 있음을 의미한다. 이와 같은 활성탄 칼럼에서의 유해성 유기물질의 우수한 선택적 흡착 결과는 기본적으로 소수성 정도의 차이와 size exclusion에 의한 기작뿐만 아니라 활성탄에 흡착된 계면활성제에 의한 다환방향족 탄화수소의 추가적인 흡착이 일어나 전체적인 성능이 향상되는 것에 기인한다.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 1998.06b
• /
• pp.19-27
• /
• 1998

박판금속성형공정을 통하여 컴퓨터를 이용한 계산방법으로 효율적이고 정확하게 해석할 수 있는 박판성형해석시스템인 SAIT_STAMP를 개발하였다. 또한 이를 현업문제에 적용하여 금형의 개발기간과 비용을 줄이고 성형품 품질저하 문제들을 해결하는데 이용하였다. SAIT_STAMP 는 성형해석, 성형후해석 프로그램과 전·후 처리기로 구성이 되어있다. 금형과 재료의 접촉 및 마찰을 고려한 새로운 접촉처리방법을 성형해석에 적용하여 해석속도와 해석정확도를 향상하였고 다단계성형 및 유압성형 등 박판성형에 필요한 대부분의 기능을 개발하여 적용하였다. 성형후해석은 성형해석의 결과를 토대로 스프링백해석을 수행한다. Visual C++을 사용하여 개발된 전·후 처리기는 window 95N/T 환경의 PC에서 수행된다. 개발된 프로그램을 이용하여 현업 문제에 적용 해석하였으며 상용S/W 대비 우수한 결과를 얻었다. 현재 삼성내 9개 관계사에서 설치되어 사용중이며 프로그램의 대외신뢰성확보를 위해 대학과 비경쟁업체에 프로그램을 설치하여 프로그램을 설치하여 프로그램의 시험과 성능향상을 하고 있다.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.12 no.2
• /
• pp.41-48
• /
• 2013

Springback is a very typical dimensional discrepancy phenomenon, which occurs usually on the final stamping parts after the tool loading is removed. Variation of springback leads to amplified variations and problems during assembly of the stamped components, in turn, resulting in quality issues. The variations in the properties of the incoming material and process parameters are the main causes of springback variation. In this research, a robust design methodology which combines orthogonal array based experimental design and design space reduction skim to reduce the springback variation for advanced high strength steel parts in sheet metal forming is suggested. The concept of design space reduction is adapted in the experimental design setup to improve the quality of the obtained solution. The effectiveness of the proposed procedures is illustrated through a robust design of springback in metal forming process of a cross member of auto body.

• Proceedings of the Korean Society of Computer Information Conference
• /
• 2023.07a
• /
• pp.283-285
• /
• 2023

이상 탐지는 데이터에서 일반적인 범주에서 크게 벗어나는 인스턴스 또는 패턴을 식별하는 중요한 작업이다. 본 연구에서는 시계열 데이터의 특징 추출을 위한 비지도 학습 기반 방법과 정규화 흐름의 결합을 통한 이상 탐지 프레임워크를 제안한다. 특징 추출기는 1차원 합성곱 신경망 기반의 오토인코더로 구성되며, 정상적인 시퀀스로만 구성된 훈련 데이터를 압축하고 복원하는 과정을 통해 최적화된다. 추출된 시계열 데이터의 특징 맵은 가능도를 최대화하도록 훈련된 정규화 흐름의 입력으로 사용된다. 이와 같은 방식으로 훈련된 이상 탐지 시스템은 테스트 샘플에 대한 이상치를 계산하며, 최종적으로 임계값과의 비교를 통해 이상 여부를 예측한다. 성능 평가를 위해 시계열 이상 탐지를 위한 공개 데이터셋을 이용하여 공정하게 이상 탐지 성능을 비교하였으며, 실험 결과는 제안하는 정규화 흐름 기법이 시계열 이상 탐지 시스템에 활용될수 있는 잠재성을 시사한다.

• Journal of IKEEE
• /
• v.13 no.2
• /
• pp.118-125
• /
• 2009

With recent advancement of high-speed, multi-gigabit data transmission capabilities, transmitters usually send data without clock signals for reduction of hardware complexity, power consumption, and cost. Therefore clock and data recovery circuits(CDR) become important to recover the clock and data signals and have been widely studied. This paper presents the design of 10Gbps CDR in 0.18$\mu$m CMOS process. A quarter-rate bang-bang phase detector is designed to reduce the power and circuit complexity, and a 4-stage LC-type VCO is used to improve the jitter characteristics. Simulation results show that the designed CDR consumes 80mW from a 1.8V supply, and exhibits a peak-to-peak jitter of 2.2ps in the recovered clock. The chip layout area excluding pads is 1.26mm$\times$1.05mm.

• Journal of IKEEE
• /
• v.10 no.1 s.18
• /
• pp.10-15
• /
• 2006

In this paper, a clock and data recovery (CDR) circuit for a serial link with a half rate 4x oversampling phase and frequency detector structure without a reference clock is described. The phase detector (PD) and frequency detector (FD)are designed by 4X oversampling method. The PD, which uses bang-bang method, finds the phase error by generating four up/down signal and the FD, which uses the rotational method, finds the frequency error by generating up/down signal made by the PD output. And the six signals of the PD and the FD control an amount of current that flows through the charge pump. The VCO composed of four differential buffer stages generates eight differential clocks. Proposed circuit is designed using the 0.18um CMOS technology and operating voltage is 1.8V. With a 4X oversampling PD and FD technique, tracking range of 24% at 3.125Gbps is achieved.

• Journal of Conservation Science
• /
• v.27 no.3
• /
• pp.251-260
• /
• 2011

This study focus on the suggestion of standard legend, the process system on making method of deterioration map, the development of crack index (CI), and the evaluation techniques of surface and 3D deterioration rate for stone cultural heritage. The standard legends of deterioration forms were made using a common graphic program after crack, blistering, scaling, break-out, granular disintegration, and perforation were subdivided. The deterioration map improved accuracy and reliability on deterioration range using 3D digital restoration and high resolution photograph mapping technique. Also, quantitative deterioration evaluation of stone cultural heritage was carried out developing the crack index, and the 3D deterioration rate of a break-out part was calculated by virtual restoration modeling. As a quantitative deterioration evaluation of Magoksa Temple stone pagoda based on the results described above, the north face showed high deterioration rate of bursting crack (1.70), hair crack (1.34), scaling (20.2%) and break out (13.0%), and the 3D deterioration rate of first roof stone was 6.7%.

• Journal of Soil and Groundwater Environment
• /
• v.8 no.1
• /
• pp.9-16
• /
• 2003

A new method has been proposed and developed that solves the problem of decreasing electroosmotic flow rate by excess $H^{+}$ and precipitation of heavy metal by $OH^{-}$. An electrolytic solution was circulated between the anode and cathode compartments that enabled the pH at the anode and cathode to be controlled. The change of the soil pH by circulation systems affects the operation time, by lowering the rate of increase of the electric potential gradient, and the removal efficiency of heavy metals, by affecting the soil pH. Since there was no effluent from the cathode compartment in circulation system, there was no need to treat the wastewater after the experiment, which resulted in the reduction of influent electrolyte volume.