• Korean Journal of Remote Sensing
• /
• v.39 no.6_2
• /
• pp.1565-1576
• /
• 2023

An atmospheric correction algorithm based on the radiative transfer model is required to obtain remote-sensing reflectance (R_rs) from the Geostationary Ocean Color Imager-II (GOCI-II) observed at the top-of-atmosphere. This R_rs derived from the atmospheric correction is utilized to estimate various marine environmental parameters such as chlorophyll-a concentration, total suspended materials concentration, and absorption of dissolved organic matter. Therefore, an atmospheric correction is a fundamental algorithm as it significantly impacts the reliability of all other color products. However, in clear waters, for example, atmospheric path radiance exceeds more than ten times higher than the water-leaving radiance in the blue wavelengths. This implies atmospheric correction is a highly error-sensitive process with a 1% error in estimating atmospheric radiance in the atmospheric correction process can cause more than 10% errors. Therefore, the quality assessment of R_rs after the atmospheric correction is essential for ensuring reliable ocean environment analysis using ocean color satellite data. In this study, a Quality Assurance (QA) algorithm based on in-situ R_rs data, which has been archived into a database using Sea-viewing Wide Field-of-view Sensor (SeaWiFS) Bio-optical Archive and Storage System (SeaBASS), was applied and modified to consider the different spectral characteristics of GOCI-II. This method is officially employed in the National Oceanic and Atmospheric Administration (NOAA)'s ocean color satellite data processing system. It provides quality analysis scores for R_rs ranging from 0 to 1 and classifies the water types into 23 categories. When the QA algorithm is applied to the initial phase of GOCI-II data with less calibration, it shows the highest frequency at a relatively low score of 0.625. However, when the algorithm is applied to the improved GOCI-II atmospheric correction results with updated calibrations, it shows the highest frequency at a higher score of 0.875 compared to the previous results. The water types analysis using the QA algorithm indicated that parts of the East Sea, South Sea, and the Northwest Pacific Ocean are primarily characterized as relatively clear case-I waters, while the coastal areas of the Yellow Sea and the East China Sea are mainly classified as highly turbid case-II waters. We expect that the QA algorithm will support GOCI-II users in terms of not only statistically identifying R_rs resulted with significant errors but also more reliable calibration with quality assured data. The algorithm will be included in the level-2 flag data provided with GOCI-II atmospheric correction.

• Journal of the Korean earth science society
• /
• v.40 no.2
• /
• pp.135-148
• /
• 2019

Although the technology for the observation of solar radiation is rapidly developing worldwide, in Korea the guidelines for comparing observations of solar radiation are only now under preparation. In this study, a procedure for intercomparison observations of solar radiation was established which accounts for meteorological and geographical conditions. The intercomparisons among observations by national reference pyranometers were carried out at the Asia Regional Radiation Center, Japan, in 2017. Recently, the result of the calibration of the reference pyranometer of the Korean Meteorological Administration (KMA) has been reported. Using the KMA pyranometer as a reference, comparisons between observations and calibrations were carried out for the standard (B to J) pyranometers of the KMA, and for the reference (A) and the standard pyranometers of the Gangneung-Wonju National University. The intercomparisons were carried out between October 24 and October 25, 2018. The sensitivity constants were adjusted according to the results of the data analysis performed on October 24. On October 25, a post-comparison observation was also performed, and the data of the participating pyranometers were verified. The sensitivity constants were calculated using only data corresponding to a solar radiation of $450.0W\;m^{-2}$ or higher. The B and I pyranometers exhibited a small error (${\pm}0.50W\;m^{-2}$), and the applied sensitivity constants were in the range $0.08-0.16{\mu}V(W\;m^{-2})^{-1}$. For the C pyranometer, the adjustment of the sensitivity constant was the largest, i.e., $-0.16{\mu}V(W\;m^{-2})^{-1}$. As a result, the nine candidate pyranometers could be calibrated with an average error of $0.06W\;m^{-2}$ (0.08%) with respect to the KMA reference, which falls within the allowed tolerance of ${\pm}1.00%$ (or ${\pm}4.50W\;m^{-2}$).

• Journal of Advanced Marine Engineering and Technology
• /
• v.26 no.2
• /
• pp.209-218
• /
• 2002

The temperature field of a counterflow non-premixed flame is investigated using thermocouples of two sizes. A thermal balance is performed on the thermocouple in order to calculate the magnitude of the radiation corrections involved. Both the thermocouple wire and bead are separately considered to be the relevant thermal surface to which convective heat transfer takes place, and from which radiation lasses occur. The flame is also simulated by using a detailed chemical kinetic mechanism in a previously developed computer code. The local thermo-physical properties of the gas mixture, required to calculate the corrections, are determined both from the simulation, and by approximating the properties of the mixture as those of molecular nitrogen at the measured temperatures. It is concluded that the thermocouple wire is the appropriate thermal surface to which radiation corrections apply, in the absence of information about the gas mixture, its properties can be reasonably approximated by those of nitrogen rm ($N_2$), and the radiation corrections are very sensitive to misalignments in the temperature and velocity fields.

• Proceedings of the Korean Association of Geographic Inforamtion Studies Conference
• /
• 2003.04a
• /
• pp.22-25
• /
• 2003

EOC(Electro Optical Camera)는 한반도 및 전 세계 육지 영역 관측용으로 설계되었다. EOC는 1999년 12월 21일 발사된 다목적 실용위성 1호에 탑재되어 가시광 대역(510 ～730nm)으로 입사하는 복사 정보를 수집해 왔다. 획득된 EOC 영상 자료는 다목적 실용위성 1호의 탑재체 자료전송 시스템(Payload Data Transmission System, PDTS)을 통해 지상으로 전송되며, 수신된 자료에 대한 방사 보정 및 기하 보정 등의 일련의 전처리(Pre-processing) 과정을 거쳐 EOC 표준 영상이 생성된다. EOC 영상에 대한 MTF 보상은 방사 보정 후 수행될 수 있으며, 다목적 실용위성 지상국에서는 사용자의 요구에 따라 EOC 영상에 대한 MTF 보상을 수행하고 그 결과를 제공한다. MTF 보상은 EOC의 점 확산 함수(Point Spread Function)를 이용하여 수행되며, 현재 Wiener 필터를 이용하여 수행되고 있다. 본문에서는 현재 다목적 실용위성 1호 영상처리시스템의 EOC 영상에 대한 MTF 보상을 소개하고, EOC의 점 확산 함수에 기초하여 역 필터(Inverse Filter) 및 의사 역 필터(Pseudo Inverse Filter)를 제작, EOC 영상에 대한 MTF 보상 수행 후 그 결과를 Wiener 필터를 이용한 결과와 비교, 분석한다.

• Korean Journal of Remote Sensing
• /
• v.15 no.3
• /
• pp.227-238
• /
• 1999

In advance of launch, simulated radiances of the Ocean Scanning Multispectral Imager (OSMI) will be very useful to guess the real imagery of OSMI and to prepare for data processing of OSMI. The data processing system for OSMI which is one of sensors aboard Korea Multi-Purpose Satellite (KOMPSAT) scheduled for launch in 1999 is developed based on the SeaWiFS Data Analysis System (SeaDAS). Simulation of radiances requires information on the spectral band, orbital and scanning characteristics of the OSMI and KOMPSAT spacecraft. This paper also describes a method to create simulated radiances of the OSMI over the oceans. Our method for constructing a simulated OSMI imagery is to propagate a KOMPSAT orbit over a field of Coastal Zone Color Scanner (CZCS) pigment concentrations and to use the values and atmospheric components for calculation of total radiances. A modified Brouwer-Lyddane model with drag was used for the realistic orbit prediction, the CZCS pigment concentrations were used to compute water-leaving radiances, and a variety of radiative transfer models were used to calculate atmospheric contributions to total radiances detected by OSMI. Imagery of the simulated OSMI radiances for 412, 443, 490, 555, 765, 865nm was obtained. As expected, water-leaving radiances were only a small fraction (below 10%) of total radiances and sun glint contaminations were observed near the solar declination. Therefore, atmospheric correction is critical in the calculation of pigment concentration from total radiances. Because the imagery near the sun's glitter pattern is virtually useless and must be discarded, more advanced data collection planning will be required to succeed in the mission of OSMI which is consistent monitoring of global oceans during three year mission lifetime.

• Korean Journal of Remote Sensing
• /
• v.26 no.2
• /
• pp.87-98
• /
• 2010

For generating accurate land cover map over the whole Korean Peninsula, post-mosaic classification method is desirable in large area where multiple image data sets are used. We try to derive an optimal mosaic method of multi-temporal Landsat ETM+ scenes for the land cover classification over the Korea Peninsula. Total 65 Landsat ETM+ scenes were acquired, which were taken in 2000 and 2001. To reduce radiometric difference between adjacent Landsat ETM+ scenes, we apply three relative radiometric correction methods (histogram matching, 1st-regression method referenced center image, and 1st-regression method at each Landsat ETM+ path). After the relative correction, we generated three mosaic images for three seasons of leaf-off, transplanting, leaf-on season. For comparison, three mosaic images were compared by the mean absolute difference and computer classification accuracy. The results show that the mosaic image using 1st-regression method at each path show the best correction results and highest classification accuracy. Additionally, the mosaic image acquired during leaf-on season show the higher radiance variance between adjacent images than other season.

• Korean Journal of Remote Sensing
• /
• v.24 no.6
• /
• pp.559-569
• /
• 2008

The Geostationary Ocean Color Imager (GOCI) on board the Communication Ocean Meteorological Satellite (COMS), the first geostationary ocean color sensor, requires accurate atmospheric correction since its eight bands are also affected by atmospheric constituents such as gases, molecules and atmospheric aerosols. Unlike gases and molecules in the atmosphere, aerosols can interact with sunlight by complex scattering and absorption properties. For the purpose of qualified ocean remote sensing, understanding of aerosol-radiation interactions is needed. In this study, we show micro-physical and optical properties of aerosols using the Optical Property of Aerosol and Cloud (OPAC) aerosol models. Aerosol optical properties, then, were used to analysis the relationship between theoretical satellite measured radiation from radiative transfer calculations and aerosol optical thickness (AOT) under various environments (aerosol type and loadings). It is found that the choice of aerosol type makes little different in AOT retrieval for AOT<0.2. Otherwise AOT differences between true and retrieved increase as AOT increases. Furthermore, the differences between the AOT and angstrom exponent from standard algorithms and this study, and the comparison with ground based sunphotometer observations are investigated. Over the northeast Asian region, these comparisons suggest that spatially averaged mean AOT retrieved from this study is much better than from standard ocean color algorithm. Finally, these results will be useful for aerosol retrieval or atmospheric correction of COMS/GOCI data processing.

• Korean Journal of Remote Sensing
• /
• v.35 no.6_1
• /
• pp.1011-1030
• /
• 2019

Remote sensing sensors used in satellites or aircrafts measure electromagnetic waves passing through the earth's atmosphere, and thus the information on the surface of the earth is affected as it is absorbed or scattered by the earth's atmosphere. Although satellites have different wavelength ranges and resolutions depending on the purpose of onboard sensors, in general, atmospheric correction must be made to remove the influence of the atmosphere in order to accurately measure the spectral signal of an object on the earth's surface. The purpose of atmospheric correction is to remove the atmospheric effect from remote sensing images to determine surface reflectivity values and to derive physical parameters of the surface. Until recently, atmospheric correction algorithms have evolved from image-based empirical methods or indirect methods using in-situ observation data to direct methods that numerically interpret more complex radiative transfer processes. This study analyzes the research records of atmospheric correction algorithms developed over the past 40 years, systematically establishes the current state of atmospheric correction technology and the results of major atmospheric correction algorithms and presents the current status and research trends of related technologies.

• 한국방재학회:학술대회논문집
• /
• 2011.02a
• /
• pp.219-219
• /
• 2011

순 장파복사량은 지표면으로 입사되는 하강 장파복사량(Downward Longwave Radiation, $R_{ld}$)과 지표면에서 반사되는 상승 장파복사량(Upward Longwave Radiation, $R_{lu}$)의 차이로 정의되는데 이는 에너지 수지 및 농업기상 연구의 중요한 주제 중 하나로서 다루어져 온 순복사량의 중요한 요소이다. 일반적으로 $R_{lu}$의 경우 지표면 온도와 방사율(emissivity)를 이용하여 산출되므로 정확히 추정이 가능하나, $R_{ld}$의 경우 대기 최상층에서 관측되는 방사량과 지표면 근처의 방사량을 함께 고려해야 하므로 실측이 어렵다. $R_{ld}$는 야간 복사계(pyrgeometer)를 이용하여 직접적으로 측정할 수 있지만 관측기기 자체가 구비되어있는 관측소가 적어 매우 드물게 이용된다. 또한 단파 복사 에너지 측정 기기에 비해 비용이 많이들고 종종 관측값이 큰 오차를 가지고 있기 때문에 실무에 적용하기 힘든 단점이 있다. 따라서 기상 관측소에서 얻어지는 증기압과 온도 관측치를 물리식, 경험식 등에 적용하여 산정하게 된다. 현재는 $R_{ld}$의 추정은 관측된 방사량간의 관계를 나타내는 경험식을 기반으로 지표면 근처의 대기 온도와 습도를 이용하여 산출하는 방법이 널리 사용되고 있다. 본 연구에서는 증발산 산정 알고리즘 개발의 시발점으로써 $R_{ld}$를 먼저 구하고 $R_{lu}$를 구하였다. 신뢰성 높은 방법을 이용하여 $R_{ld}$를 구하게 되면 정확도 높은 $R_N$을 구하는 데 기여할 수 있으며, 궁극적으로 보다 정확한 증발산을 산정할 수 있게 된다. $R_{ld}$는 일반적으로 clear sky 조건 하에서의 복사 에너지 플럭스($R_{ldc}$)를 구한 후 구름의 양에 따라 보정한다. 하강 장파복사량의 경우 널리 사용되는 공식 중 하나인 Brutsaert의 공식을 사용하였다. 광릉, 해남에 위치한 플럭스 타워지점에서 실측된 기온과 실제 수증기압을 입력인자로 사용하여 지점별 $R_{ldc}$를 먼저 구하고 Moderate Resolution Imaging Spectroradiometer(MODIS) 영상자료를 이용하여 검증한 뒤 최종적으로 남한지역을 대상으로 순 장파복사량 지도를 작성하였다. 이를 위해 MODIS 07 대기 프로파일 산출물(Atmospheric Profile Product)중 기온 및 이슬점온도를 추출하여 산정식의 입력자료로서 사용하였다. 상승 장파복사량의 경우 MODIS 11 지표면 온도 산출물(Land Surface Temperature product)를 이용하여 산정하였다. 이는 남한 지역의 증발산량 추정 및 에너지 수지 연구를 위한 중요한 기본 자료로서 유용하게 사용될 수 있으리라 사료된다.

• Proceedings of the Korean Society of Computer Information Conference
• /
• 2012.01a
• /
• pp.73-75
• /
• 2012

본 논문에서는 복부 초음파 영상에서 근육 영역의 명암 대비를 강조하기 위해서 Multiple 연산을 적용한 후, 명암 대비가 강조된 영상에서 수직 방향의 명암도가 200 이상인 픽셀들에 대해 퍼지 기법에 적용하여 이진화한다. 이진화된 영상에서 피부층과 외복사근 사이에 존재하는 피하지방을 추출하기 위해 Thick-Search 방법을 적용하여 피부층과 외복사근을 추출한 후, 피부층과 외복사근의 사이에 Up-Down Search 방법을 적용하여 피하지방층을 추출한다. 피하지방층이 추출된 영상에서 근막의 형태학적 정보를 이용하여 근막을 추출한다. 추출된 근막 사이에 대해 Up-Down Search 방법을 적용하여 근육의 후보 영역을 추출한 후, 근육의 형태학적 정보를 이용하여 최종적인 근육 층을 추출한다. 추출된 근육의 경계선을 Monotone Cubic Hermite 보간법을 이용하여 근육의 경계선을 보정한 후, 최소자승법을 이용하여 근육의 두께를 측정한다. 제안된 방법을 복부 초음파 영상에 적용하여 근막 및 근육 영역을 추출한 결과, 기존의 근육 추출 방법보다 정확하게 추출되었고, 근육의 두께 측정 결과도 전문의가 육안으로 측정한 결과와 근사한 것을 확인할 수 있었다.