• Ecology and Resilient Infrastructure
• /
• v.5 no.4
• /
• pp.199-209
• /
• 2018

In river design, consideration of bed shear stresses is necessary to secure stability of levee and floodplain. In this study distributions of bed shear stresses in compound open channels are analyzed through numerical simulation for various width and depth. LES solver in OpenFOAM is applied to 12 cases of compound channel shapes considering secondary flow which effects distributions of bed shear stresses. By the results time averaged velocity distributions, secondary currents, and distributions of bed shear stresses are analyzed. Overall distributions of bed shears in floodplain show that higher shear stresses are seen in left of floodplain and the shears decrease toward right of floodplain. However, high local variations in shear stresses are shown due to the secondary flow effects. In shallow floodplain, bed shear stresses show low value below 0.8 times of averaged bed shear. In deep floodplain, bed shear stresses show high value over 1.2 - 1.4 times of averaged bed shear.

• Water for future
• /
• v.29 no.3
• /
• pp.217-228
• /
• 1996

A new routing computer model for the symmetric compound channel called the ASFMCS (Apparent Shear Force Muskingum-Cung Method in Symmetry) is developed. The Muskingum-Cunge routing method is adapted. The Apparent Shear Force(ASF) between the deep main channel and shallow floodplain flow is introduced while the flow is routed. The nonlinear parameter method is applied. The temporal and spatial increments are varied according to the flow rate. The adaptation of above schemes is tested against the routed hydrographs using the DAMBRK model. The results of general routing practice of Muskingum-Cunge Method (GFMC) are also compared with those of the above two models. The results of the new model match remarkably well with those of DAMBRK. The routed hydrographs show smooth variation from the inflow boundary condition without any distortions caused by the difference of cross-section shape. However, the results of GPMC, showing earlier rising and falling of routed hydrograph, have considerable differences from those of the ASFMCS and DAMBRK.

• Ecology and Resilient Infrastructure
• /
• v.3 no.1
• /
• pp.14-21
• /
• 2016

This study investigated the behavior of sediment bars in a compound channel with a drop structure. Flow was separated into side banks by alternate bars, and flow was concentrated into the downstream of bar fronts. The bed downstream of a drop structure degradated due to the concentrated flow from it. Bar shapes were kept by the influence of their shapes upstream. Alternate bars, central bars, and multiple bars were developed as the width to depth ratio increased, and the number of bars increased. The bar in the downstream of a drop structure decreased in length due to the concentration of flow and its disturbance.

• Cement Symposium
• /
• no.31
• /
• pp.264-269
• /
• 2004

• Journal of Korea Water Resources Association
• /
• v.40 no.3
• /
• pp.265-276
• /
• 2007

An understanding of the hydraulic characteristics in the compound channel with vegetation is important in designing stream restorations or managing the floodplain. A laboratory flume of 16 m long and 0.8 m wide was used for analysis of the hydraulic characteristics in the single section channel and the compound channel with artificial vegetation. Slope of experimental channel is 0.5 %. Discharges are ranged from $0.2\;m^3/s\;to\;$0.4\;m^3/s$. The experiments were done by changing water depth ratio, vegetation density and vegetation location. When water depth ratio in the single section channel with vegetation increase up to 3.5, the results showed that the increment of water depth due to vegetation may be ignored in practice. The maximum increment of water depth was measured up to 6 % in the compound channel with vegetation and the range of velocities increment in the low flow channel was from 25 % to 85 % compared with section average velocities. As the vegetation densities increase and water depth ratios decrease, the velocity of the low flow channel increased. The range of roughness coefficients in the vegetated reaches were estimated from 0.055 to 0.14 in the single section channel and from 0.063 to 0.085 in the compound channel using HEC-RAS and RMA-2 model.

• Journal of Wetlands Research
• /
• v.24 no.4
• /
• pp.320-330
• /
• 2022

The Hangang river estuary, which is a natural estuary without structures such as estuary barrage, is an ecological pathway connecting the sea and rivers. Accordingly, Hangang river estuary has various species, and there is very valuable. Sediment classification in Hangang river estuary is three-dimensionally and diversely is distributed. Sediment classification in Hangang river estuary is also sensitively changed according to various factors such as climate change and river development. It is typically cause to landform and to develop a compound cross section. In Janghang wetland, the plant success is remarkable according to the morphological change at river bed. The purpose of this study is to identify the mechanism of wetland formation based on the observation on-site. As a result of the observation, Janghang wetland where was artificially created, has been grown according to the river bed change based on the flow rate and the plant success. The viscous surface layer material(fine grains of wash rod properties), which is not the main material(sand) of the river bed, but sub-materials of river bed, jas been settled on the pioneer plants(bolboschoenus planiculmis, etc.). It is an important role in the growth of a compound cross section and a wetland. After the wetland developed to the compound cross section, it is observed that the pioneer plants are transferred to other plant species.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2009.05a
• /
• pp.499-500
• /
• 2009

This study was performed to evaluate bonding strength of the composites section made of existing concrete and repair mortar in domestic. The pull-out tester was used to test bonding strength for the composites section made of each materials. The results of the test was used to evaluate the korean industrial standard of polymer modified cement mortars for maintenance in concrete structures.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2015.05a
• /
• pp.84-85
• /
• 2015

The aim of this study is to develop crack self-healing concrete and repair materials with the sulfate resistance using geo-materials and by-products for practical industrial application. Research has been done on the healing of cracks in aged concrete, but it seems that very little is known about the actual healing mechanism and its conditions. In this research, the essential properties of geo-materials with pozzolanic reaction for self-healing were analyzed and discussed.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2009.05a
• /
• pp.718-722
• /
• 2009

하도 상황이 수역(水域)에서 식생역(植生域)으로 변화하여 최종적으로 육역화(陸域化)단계로의 천이가 진행되는 현상을 하도 육역화라고 한다. 하도 육역화는 하천의 생태환경적 측면에서 많은 문제들을 야기할 수 있으며, 단일 단면 하도의 복단면 고착화로 하천 통수 단면이 감소하여 하도의 홍수 관리 기능에 심각한 위해 요소로 작용할 수 있다. 본 연구는 하도 육역화 방지를 위한 수공구조물로서 말뚝을 설치하고 그 효과를 3차원 수치모형인 FLOW-3D를 이용하여 검토하였다. 수치 모의는 구조물 주변의 복잡한 흐름 모의를 위하여 복잡한 지형지물이 있는 경우에 많이 활용되는 LES(Large Eddy Simulation) 난류 모델을 적용하였으며 세굴 및 퇴적 영향을 알아보기 위하여 유사 세굴(Sediment Scour) 모델을 적용하였다. 하도 육역화 방지 수공구조물의 효과 검토를 위하여 모형 수로의 제방 근처에 말뚝을 설치하고 말뚝직경, 설치 간격 및 배열 등을 변화시켜 구조물 주변의 동수역학적 거동, 흐름분리 효과 및 세굴영향을 수치모의를 통하여 분석하였다. 분석 결과 말뚝에 의한 흐름 분리와 국부 세굴에 의하여 하상 퇴적이 상대적으로 감소되는 효과를 나타냈으며 설치간격이 수변으로부터 말뚝 두께의 2배 그리고 흐름방향으로 말뚝 두께의 2배 이내의 간격으로 설치하여야 더욱 효과적인 것으로 나타났다. 추후 다양한 수리모형 실험을 통한 검증과 다양한 조건에 대한 수치 모의를 통하여 하도 육역화 방지 기술을 개발할 수 있을 것으로 사료된다.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2010.05a
• /
• pp.223-227
• /
• 2010

하천의 수위와 유량에 대한 정확한 정보는 이수, 치수와 같은 수자원 관리에 있어서 가장 기본적인 기초자료가 된다. 하천 수위와 유량 자료를 확보하기 위한 지속적인 직접 계측 방법은 많은 시간과 비용이 소모되며, 홍수 시에는 위험성이 존재하여 자료 확보가 불가능하다. 따라서 수치모형을 이용한 수위-유량 자료의 예측과 활용이 필요하며, 2차원 수치모형의 경계조건을 설정할 경우에도 활용할 필요성이 있다. 본 연구에서는 복단면 개수로 및 불규칙한 하상을 보이는 횡단면 상에서의 단위유량 예측을 위한 유한요소모형을 개발한다. 지배방정식은 Wark 등 (1990)이 제시한 운동량방정식을 이용하며, 단면형상과 Manning 조도계수, 그리고 수위를 알면, 결과적으로 흐름방향 단위유량의 횡방향 분포를 얻을 수 있다. 개발된 모형의 검증을 위해 실측 자료와 비교하며, 또한 Darcy-Weisbach 마찰계수를 이용하는 Darby와 Thorne (1996)의 모형 결과와도 비교한다. 검증된 모형의 알고리즘을 2차원 모형의 상류단 경계조건 설정에 활용하여, 절점별 유입유량을 차등분배 시켰을 때와 그렇지 못했을 때의 결과를 비교한다. 또한 수위를 경계조건으로 입력하였을 때 개발 모형을 활용하여 유입유량을 예측하는 활용방안을 제시한다.