• Proceedings of the KSR Conference
• /
• 2006.11b
• /
• pp.1240-1246
• /
• 2006

Generally, there are two types of main factors to affect output power quality of a auxiliary power supply an EMU(electric multiple unit). One is a voltage flicker by amplitude modulation of short time and air compressors. The other is repetitive motion of large capacity motor such as air compressors, HVAC unit etc. in main factors. This paper compared two kinds of fluorescent lamp, 32W (after remodeling interior) and 40W(before remodeling interior) and measured the light output varying input power(AC220V) for a flicker phenomenon related power supply of lamps in EMU. Also, we analyzed a flicker considering EMU operating time and density in order to grasp main factors of a load change to cause a voltage change. As a results of test, a 40W fluorescent lamp was more insensitive with 20.26% degree an eye recognition degree sides about changes of the input power and lower with 19.9% voltage side generating flicker compare with fluorescent lamp 32W. Also, we confirmed the fact which the fluorescent lamp flicker was generated by varying fluorescent lamp output voltage when the commercial EMU was in high driving density and at the busy time. Additionally, we confirmed the frequency band which an EMU passenger could feel sensitively blinking of a fluorescent lamp was visually $8Hz{\sim}15Hz$.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.27 no.6
• /
• pp.883-889
• /
• 2021

The South Korean fishing industry is experiencing a rapid growth owing to an increase in its leisure-fishing population. Consequently, fishing boats weighing 9-10 [ton] have also been increasing. Current fishing boats operate their essential equipment by switching their engines with batteries to reduce the cost of gas and engine noise. However, stranding incidents have been increasingly recorded annually, in which boats fail to start owing to discharged batteries, and these incidents can lead to serious casualties. This study proposes the installation of a solar auxiliary power system to safeguard fishing boats, particularly those weighing between 9-10 [ton]. The feasibility of securing space for the solar auxiliary power of boats under consideration was verified. To examine the application of solar power, this study calculates the load necessary to operate it for fishing and models such a system using an electricity analysis program The modeled system, which applies the monthly horizontal solar insolation, validated the adoption of a solar auxiliary power in fishing boats.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.37 no.6
• /
• pp.64-72
• /
• 2000

This paper deals with the parallel operation of two PWM converters for auxiliary block of high speed train. The parallel operation of AC/DC PWM converter controlled by 3-level PWM switching method to operate switching devices to realize a high power factor and reduce the primary side of the transformer current harmonics is proposed. In this paper, it is presented the phase shift technique between two converters switching phase, solution to eliminate the coupling effects due to the transformer and zero crossing detection method for synchronized with the source and controller. Experimental results for laboratory system with TMS320C31 microprocessor and 10［kVA］PWM converter confirm the validity of the proposed algorithm.

• Journal of the Microelectronics and Packaging Society
• /
• v.30 no.1
• /
• pp.71-78
• /
• 2023

The possibility of improving plating thickness distribution was investigated through quantitative consideration of bipolar electrodes without external power applied. By having the cathode tilted with respect to the anode, the potential distribution in the electrolyte solution adjacent to the cathode is different due to the difference in iR drop due to the path difference to the anode in each region of the cathode. The purpose of this study is to observe the bipolar characteristics in the case of an auxiliary anode for the non-uniform potential distribution of such a Hull cell. In particular, in order to evaluate the possibility of improving the non-uniform thickness distribution of the cathode by utilizing these bipolar characteristics, it was verified through experiments and simulations, and the electric potential and current density distribution around the bipolar electrode were analyzed. The electroplating in a Hull cell was performed for 75 min at a current density of 10 mA/cm², and the average thickness is about 16 ㎛. The standard deviation of the thickness was 10 ㎛ in the normal Hull cell without using the auxiliary anode, whereas it was 3.5 ㎛ in the case of using the auxiliary cathode. Simulation calculations also showed 8.9 ㎛ and 3.3 ㎛ for each condition, and it was found that the consistency between the experimental and simulation results was relatively high, and the thickness distribution could be improved through using the auxiliary anode by the bipolar phenomenon.

• Proceedings of the KIEE Conference
• /
• 2008.04b
• /
• pp.179-181
• /
• 2008

In this study, the dynamic characteristic of a contact wire and pantograph suppling electrical power to high-speed trains are investigated. The analysis of the loss of contact based on Power Simulator program software is performed to develop power line disturbance model suitable for high speed operation. It is confirmed that a contact wire and pantograph model are necessary for studying the dynamic behavior of the pantograph system.

• Proceedings of the KIEE Conference
• /
• 2006.07d
• /
• pp.1911-1912
• /
• 2006

원자력 발전소가 전력계통으로부터 분리되어 외부전원으로 발전소 내부의 주요 보조기기들을 운전할 수 없는 상황에서 비상디젤 발전기는 원자력발전소의 핵심 냉각펌프 등 전원을 공급하지 않으면 안 된다. 현재까지는 품질등급 Q-Class인 비상 발전기 여자시스템이 외국 기술에 전적으로 의존하여 공급되었는데 비상발전기가 차지하는 역할의 중요성으로 인한 품질활동 절차, 규제기관의 인허가 획득 등의 문제 때문에 비상 디젤발전기의 여자시스템이 현재까지 국산 연구개발이 이루어지지 않았다. 본 논문은 원전 비상디젤 발전기 여자시스템의 국산개발에 필요한 시스템의 기기 검증에 대한 내용을 기술하고자 한다.

• Proceedings of the KIEE Conference
• /
• 2004.10a
• /
• pp.157-159
• /
• 2004

기존의 수위 제어기는 단 방향 무선 통신을 이용함으로써 오류가 발생한 정보의 수신 시에 정정 능력이 없었다. 그리고 대부분의 관정이 산간 오지에 설치됨으로써 태양전지와 보조 배터리를 전원으로 사용하기 때문에 소모 전력의 절감이 큰 과제였다 또한 송신기와 수신기의 채널 변경 시에는 전문가의 도움을 받아야만 가능하였다. 본 연구에서는 수위 제어기에 마이크로 컨트롤러를 채용하고 양방향 통신 방식을 이용함으로써 잘못 수신된 정보를 정정할 수 있도록 하고, 전력 소모가 많은 송신기의 전원을 관리하며, 일반 사용자도 DIP 스위치를 이용하여 채널을 변경할 수 있는 수위제어 시스템을 구현하고자 하였다.

• Proceedings of the KIPE Conference
• /
• 2013.07a
• /
• pp.307-308
• /
• 2013

기존 LED(Light Emitting Diode) 백라이트 LCD(Liquid Crystal Display) TV 용 전원 장치는 다중출력 플라이백 컨버터를 사용하여 로직 보드, 영상 보드, LED 백라이트 등의 구동에 필요한 다양한 전원들을 생성, 공급한다. 특히, 기존에는 LED 백라이트의 구동을 위한 출력단에는 부스트 컨버터를 추가하여 LED 전류를 제어하였다. 따라서, 부스트 컨버터에 의한 부피 및 원가가 증가하는 단점이 있었다. 본 논문에서는 부스트 컨버터 없이 보조 스위치 하나만을 사용한 LED 구동회로를 이용하여 LED의 정전류 제어가 가능한 저 가격형 LED 구동회로의 비동기식 제어방법을 제안한다. 최종적으로 제안 회로를 32인치 LCD TV 용 LED 백라이트에 적용하여 그 실험 결과를 바탕으로 제안 회로의 타당성을 검증하였다.

• Proceedings of the KSR Conference
• /
• 2003.05a
• /
• pp.548-553
• /
• 2003

Battery supplies Each Electric device in Railway vehicles with Control Power. When Battery is overchargedjustly, the battery voltage is not satisfied with the minimum operating voltage, CVCF Inverter(SIV) is supplied with external Power supply or the other railway vehicles and start up CVCF Inverter. In this paper to improve this problem, Dead battery Starter system is proposed. When the battery voltage is not satisfied with the minimum value.turn on the Dead Battery Starter switch, and the Dead Battery Starter supplies the control power to the SIV controller from the line voltage. With this Dead Battery Starter system, the train can be operated when the battery is not proper status. Dead Battery Starter is designed by ROTEM and will be delivered to Attiko Metro Series 2.

• Proceedings of the KIPE Conference
• /
• 2014.07a
• /
• pp.39-40
• /
• 2014

최근 차량은 기존의 화석연료를 사용하는 엔진과 배터리로부터 전원을 공급받는 전동기를 연결하는 구조로 연비를 개선하기 위한 연구가 활발히 진행되고 있다. 가속 시 배터리 방전으로부터 전원을 공급받고, 감속 시 회생제동을 통해 배터리 충전을 반복한다. 이로 인한 배터리의 수명한계 및 전력 한계 등을 보완하기 위해서 초고용량 커패시터를 배터리와 함께 사용하는 이중 보조 동력원에 대한 연구가 활발히 진행되고 있다. 본 논문에서는 배터리 수명 개선을 위해 배터리와 슈퍼커 패시터를 병렬 운전하는 5kW급 양방향 DC/DC 컨버터를 설계하여 검증하였다.