• Journal of the Korean Society for Precision Engineering
• /
• v.19 no.7
• /
• pp.80-87
• /
• 2002

Liquefied petroleum gas (LPG) is used in spark ignition (SI) engines. Fuel injection rate of an injector is affected by fuel temperature and pressure in LPG liquid injection systems for either a multi-point-injection (MPI) or a direct injection (DI) engine. Even fuel injection conditions are varied, the air-fuel ratio should be accurately controlled to reduce exhaust emissions. In this study, a correction factor fur the fuel injection rate of an injector is derived from density ratio and pressure difference ratio. A compensation method of injected fuel amount is proposed for a fuel injection control system. The experimental results for the LPG liquid injection system in a SI engine show that this system works well fur a full range of engine speed and load condition, and the air-fuel ratio is accurately controlled by the proposed correction factor.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2012.10a
• /
• pp.369-373
• /
• 2012

최근 강화된 국내외의 배출가스 규제 조건을 충족시키기 위해, 사용자의 요구대로 연료의 분사시기와 분사량을 조절할 수 있는 CRDI ECU 제어 알고리즘의 개발이 필요하다. 따라서 본 논문에서는 산업용 CRDI 엔진 전용 ECU에 적용할 수 있는 노킹 판별 및 엔진 밸런스 보정이 가능한 노킹 분석 시뮬레이터를 개발하였다. 개발한 노킹 분석 시뮬레이터의 결과를 OBD-II 표준을 사용하여 차량 위주의 진단기를 개발하여 운전자가 직접 차량을 진단할 수 있는 운전자 중심의 진단 서비스를 제공하고자 한다. 이를 위해 자동차 고장진단 신호 및 센서 출력 신호를 유선시스템과 무선 시스템인 블루투스 모듈을 이용하여 실시간 통신이 제공 될 수 있는 OBD-II 진단기 S/W 설계 방안을 제안함으로써 차량의 연비를 향상시키고, 유해 배출가스의 발생을 최소화하여 엔진 효율성의 개선 방안을 제시하고자 한다.

• Proceedings of the Korean Society of Computer Information Conference
• /
• 2014.07a
• /
• pp.427-428
• /
• 2014

화재발생 시 인명 안전을 위하여 초기의 화재감지가 매우 중요한 요인이다. 기존 연기감지기의 경우 일정한 조건만 맞으면 작동하기 때문에 비화재보의 우려가 높다. 특히 차량 매연도 연료가 연소되어 나오는 연기이므로 차량정체 시 트럭 등에서 발생하는 심한 매연에도 반응하여 오작동의 가능성이 높다. 이러한 기존 화재감지기의 문제점을 해결하기 위해 다양한 IR 레이저 기반 연기검출장치가 활용되고 있다. 하지만 IR 레이저 기반 연기검출장치는 100m 거리가 이격된 레이저 발광부와 수광부 구조에 따라 발광부 레이저광선의 각도변화에 따른 수광부 레이저 포인트 위치가 매우 민감하게 변화함에 따라 초기 레이저 포인트의 초점을 정확히 정합하고, 이후 보정하기 위한 고정밀 자동 초점 정합장치가 필요하다. 이에 본 논문에서는 레이저 투광부와 수광부를 분리하여 레이저 송신기, 수신기로 구성되는 고정밀 자동초점 정합장치를 설계하고자 한다.

• 한국연소학회:학술대회논문집
• /
• 2015.12a
• /
• pp.131-134
• /
• 2015

국내 천연가스 열량제도를 현행 표준 열량제 $10,400kcal/Nm^3(43.54MJ/Nm^3)$에서 중간 조정기간을 두고 2012.07.01부터는 최저 $10,100kcal/Nm^3(42.28MJ/Nm^3)$을 유지하고 2015년 이후 $9,800(41.1MJ/Nm^3){\sim}10,600kcal/Nm^3(44.4MJ/Nm^3)$ 열량범위제도로 변경 추진되고 있다. 산업현장에서 열량변동을 측정하여 공연비 제어기술을 개발하고자 60ton Al 용해로에 열량대응기술 개발을 위한 내용으로 열량측정시스템설치 및 열량 값과 연계하여 공연비 제어기술개발연구 내용으로 결과는 다음과 같다. 단순히 표준열량으로 에 맞춰 프로그램된 제어로직에 열량변동에서 검출된 신호를 이용하여 연료보정 값을 추가한 로직을 재구성할 필요가 있다. 이 혀장의 경우는 용탕의 온도가 목표온도 근처까지 올리기가 어려워진 상황으로 주로 공급열량 저열량화에 따른 과잉공기영향으로 온도상승이 어려워 보이며 적절한 공연비로 최적화 되면 이러한 문제가 개선되리라 생각된다.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.39 no.2
• /
• pp.195-200
• /
• 2011

A low power Hall thruster is under development for orbit maintenance of a small Earth observing satellite. Both cylindrical and annular type thrusters were manufactured and tested to characterize the performance of cylindrical Hall thrusters. Results were described through comparative analyses. Cylindrical thrusters were manufactured in two different channel diameter dimensions, 28 mm and 50 mm. Thrust, ion velocity and ion current were measured in various operating conditions. The results show that cylindrical thrusters are more efficient in mass utilization and voltage utilization, but less efficient in current utilization than annular one.

• Korean Journal of Remote Sensing
• /
• v.37 no.2
• /
• pp.275-290
• /
• 2021

Sulfur dioxide (SO2) in the atmosphere is mainly generated from anthropogenic emission sources. It forms ultra-fine particulate matter through chemical reaction and has harmful effect on both the environment and human health. In particular, ground-level SO2 concentrations are closely related to human activities. Satellite observations such as TROPOMI (TROPOspheric Monitoring Instrument)-derived column density data can provide spatially continuous monitoring of ground-level SO2 concentrations. This study aims to propose a 2-step residual corrected model to estimate ground-level SO2 concentrations through the synergistic use of satellite data and numerical model output. Random forest machine learning was adopted in the 2-step residual corrected model. The proposed model was evaluated through three cross-validations (i.e., random, spatial and temporal). The results showed that the model produced slopes of 1.14-1.25, R values of 0.55-0.65, and relative root-mean-square-error of 58-63%, which were improved by 10% for slopes and 3% for R and rRMSE when compared to the model without residual correction. The model performance by country was slightly reduced in Japan, often resulting in overestimation, where the sample size was small, and the concentration level was relatively low. The spatial and temporal distributions of SO2 produced by the model agreed with those of the in-situ measurements, especially over Yangtze River Delta in China and Seoul Metropolitan Area in South Korea, which are highly dependent on the characteristics of anthropogenic emission sources. The model proposed in this study can be used for long-term monitoring of ground-level SO2 concentrations on both the spatial and temporal domains.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.50 no.1
• /
• pp.285-290
• /
• 2013

As well as the advanced development of modern society, and the environmental problems caused by the use of fossil fuels is emerging. So do not reap the performance level of the car to be able to replace existing fossil fuel and low-emission energy and technology development are continually strives. Therefore, this study aims to present the direction of the new interface 21st century Mobile Auto Electric Segway technology in the field of security and disadvantages based. The Segway is a problem because the control itself skewed by certain slope where the slope in the wrong adjustment tipping. In this study, the year saw the introduction of two pressure sensors(Load cell) used to solve these drawbacks, according to the ratio of the weight control methods. In addition, the ramps operate in a straightforward, using an acceleration sensor and a gyro sensor in order to compensate for the slope value in free control method to study looked. Measured by calculating the value of the occupant's weight and according to the inclination of the pressure sensor pressure sensing experiment results this year, we can see that the control variable for the change in body weight is greater than the inclination. Segway is also easy to control, and the stability of the ramps, etc. As a result, created using a pressure sensor.

• Journal of Korean Society of Forest Science
• /
• v.102 no.1
• /
• pp.113-121
• /
• 2013

It has been known that edges of forest fire areas play significant roles in post-fire change of forest ecosystem and recovery process. The purpose of this study was to analyze the relationships between edge formation of burned forests and landscape characteristics with consideration on spatial autocorrelation. Samcheok fire site burned in 2000 was selected as the study area. Seven hundred fifty three of 500 $m^2$ grid cells were generated for measuring landscape characteristics. This study used the topographic variables including slop, elevation, topographic wetness index, solar radiation index and proportions of fuel and land use types. In delineating landscape characteristics correlation analysis with modified t-test were performed for exploring the relationships between edge formation and landscape characteristics. The results indicated that edge formation of burned forests was positively correlated with most variables including TWI, SRI, water, paddy, developed, farm, grass, bare soil, and negatively related with elevation, slope and all fuel types. Especially TWI (r=0.437) showed a strong positive correlation with edge formation. According to the results, edge of burned forests were likely formed when proportions of heterogeneous land use types were high with mild slope and low elevation.

• Journal of the Korean Institute of Gas
• /
• v.15 no.6
• /
• pp.28-33
• /
• 2011

The purpose of this paper analyzes and studies to improve the failure cases on the computer that one of electronic control elements for engine in liquified petroleum gas vehicle. The first case, it certified the non-starting phenomenon of engine that it's electronic control unit didn't control the fuel for idle speed actuator because of no given action signal in slow-cut solenoid valve. The second case, it knew the bad condition phenomenon of engine and back-fire by the wire melting of ignition coil and firing of transistor being inside ECU. The third case, it certified the action stoping phenomenon of engine and malfunctioning signal for engine ECU because of leakage of current and an excess current by moisture inflowing inside ECU curcuit plate. Therefore, it is thought that will elevate the durability and reliability of engine computer throughout procure of quality.

• Journal of Advanced Navigation Technology
• /
• v.19 no.6
• /
• pp.465-472
• /
• 2015

In order to improve the performance of TCAS it should improve the performance of the sensor, which transmits a variety of information. In this paper, To improve the performance of the existing radar sensors such as being used in behalf of the next generation air traffic control system, ads-b the applied. In addition, ADS-B in a high precision by using information from the correction GPS system, SBAS assume would be able to apply an improved location accuracy for TCAS and analyzed TCAS and ADS-B. Played the simulation results, TCAS equipment receives the help of these ADS-B can calculate a CPA to determine the position of the aircraft in advance, and it was confirmed that it is possible to reduce the unnecessary RA operation, also, the pilot reduction and the workload, it has advantages such as fuel consumption and time associated with the reduced operation unnecessary RA was confirmed.