• 제목/요약/키워드: 보이드

검색결과 178건 처리시간 0.041초

결함에 따른 전기트리의 발생양상 및 PD 분포 특성의 비교/분석 (Comparison and analysis of electrical treeing and PD distribution according to defects models)

  • 정해은;박성희;임기조;강성화
    • 한국전기전자재료학회:학술대회논문집
    • /
    • 한국전기전자재료학회 2006년도 하계학술대회 논문집 Vol.7
    • /
    • pp.497-498
    • /
    • 2006
  • 본 논문에서는 전력기기의 고체 절연물내에서 발생하는 전기트리의 진전양상 및 그에 대한 PD 분포 특성을 Hn(q), $Hn(\Psi)$, $Hq_{avg}{\Psi})$, $Hq_{max}(\Psi)$로 표현하였다. 또한 통계적 분포의 변화정도를 나타내어 정량적으로 확인을 하고자 하였다. 논문에서 사용한 트리 결함은 침-평판 트리, 보이드트리, 고체절연물내 이물트리 등 세 가지 경우이며, 각각의 트리 진전에 대한 특성은 서로 다른 특성을 보이는 것으로 나타났다.

  • PDF

수직상향 기액이상류의 유동특성 (Flow Characteristics of Vertical Upward Gas-Liquid Two-Phase Flow)

  • 최부홍
    • Journal of Advanced Marine Engineering and Technology
    • /
    • 제29권4호
    • /
    • pp.377-383
    • /
    • 2005
  • This paper deals with the flow characteristics of air-water two-phase flow in a vertical tube of 10mm I.D. and 600mm in length at an adiabatic condition. The obtained experimental data were covered with the liquid superficial velocity ranging from 0.095m/s to 2.56m/s. and the gas superficial velocity ranging from 0.032m/s to 21.08m/s. The effects of the gas and liquid superficial velocity on the flow pattern transitions, frictional pressure drop, and film thickness and gas-liquid interface roughness were also examined. It was found that the film thickness increased and the liquid film wave length was more longer with the liquid superficial velocity $j_L$ increasing at $j_G$ constant. It was also showed that the frictional pressure drops were experienced in three regions. namely increasing region(bubbly flow), decreasing region (Taylor bubble and slug flows) and re-increasing region (annular flow).

Riser의 기액유동 특성에 따른 Air-lift 펌프의 성능예측 (A Prediction of the Air-lift Pump Performance by gas-liquid Flow Charac teristics of Riser)

  • 박찬수
    • Journal of Advanced Marine Engineering and Technology
    • /
    • 제23권2호
    • /
    • pp.252-258
    • /
    • 1999
  • As an effective means to convey crushed materials from seabed to on board ship and to raise hazardous or abrasive liquids air-lift pump provides a reliable mechanism due to its simple config-uration and easy-to-operate principle. The present study is focused on fundamental investigation of related performance by the analysis program based on the gas-liquid two-phase flow in circular pipes. The program covers pump operating in isothermal and vertical two-phase flow with Newto-nian liquids. it is summarized as important result that an optimum air mass flow rate exists for the maximum lifted liquid mass flow rate in terms of a given submergence rates and furthermore attachment of downcomer gives little effects on riser performance the conveyed liquid flow rate increases with larger submergence rate.

  • PDF

개선한 Munilla-Peinado RFID 경계 결정 프로토콜 (Improved Munilla-Peinado's RFID Distance Bounding Protocol)

  • 안해순;윤은준;부기동;남인길
    • 한국정보처리학회:학술대회논문집
    • /
    • 한국정보처리학회 2010년도 춘계학술발표대회
    • /
    • pp.824-825
    • /
    • 2010
  • 최근 RFID 태그들이 근접 인증(proximity authentication)을 위해 사용자의 위치나 상황을 이용하여 통신하기 때문에 위치 기반 공격인 중계 공격(relay attack)에 매우 취약함이 증명되었다. 이러한 중계 공격들을 방지하기 위해 리더와 태그사이의 메시지 송수신 왕복 시간을 측정하는 경계 결정(distance-bounding) 프로토콜이 한 해결책으로 연구되고 있다. 2008년에 Munilla와 Peinado는 Hancke-Kuhn이 제안한 프로토콜을 수정하여 보이드(void) 기법을 적용한 RFID 경계 결정 프로토콜을 제안하였다. 공격자에게 n번의 왕복에서 $(5/8)^n$으로 성공 확률을 감소시켰지만, 저비용 수동형 태그에서 많은 통신량과 저장 공간을 요구하므로 비효율적이다. 따라서 본 논문에서는 태그측의 해쉬 함수 연산량을 줄이고, 적은 저장 공간을 요구함으로써 저비용 RFID 시스템에 적합한 효율적인 RFID 경계 결정 프로토콜을 제안한다.

수직상향 이상류에서 동심원관 간극이 유동양식과 보이드분포에 미치는 영향 (Effects of Annular Gap Size on the Flow Pattern and Void Distribution in a Vertical Upward Two-Phase Flow)

  • 손병진;김인석;김문철
    • 대한설비공학회지:설비저널
    • /
    • 제16권4호
    • /
    • pp.383-391
    • /
    • 1987
  • An experimental investigation has been conducted to determine the flow pattern for two-component , two-phase mixtures which flow vertically upwards in concentric annuli based on the measurement for the local void fraction and the distribution of the local void fraction in various radial locations in the annular gap. The annular test section consists of a lucite outer tube whose inside diameter is 38mm and a stainless steel rod, The rod diameter is either :2mm,16mm or 20mm. It is demonstrated that the probability density function of the fluctuations in void fraction may be used as an flow pattern indicator and the local void fraction distribution depends on the flow pattern and radial location in the annular passage.

  • PDF

수직동심환상관에서 반경방향 보이드율의 변동특성 (Fluctuation Characteristics of Radial Void Fraction in Vertical Concentric Annuli)

  • 손병진;김인석;김문철
    • 대한설비공학회지:설비저널
    • /
    • 제16권5호
    • /
    • pp.516-524
    • /
    • 1987
  • This paper presents experimental data of fluctuation characteristics of local void fraction of air-water two-phase flow which are associated with the flow pattern, annular gap size and radial location in vertical concentric annuli with coefficient of skewness and kurtosis. The annular gap widths are 13mm, 11mm, and 9mm for a 38m inner diameter as the lucite outer tube. A electrical conductivity probe was used to measure the local void fraction and traversed diametrically from inner wall to outer wall using radial increments of 2mm. It was shown that distribution of the coefficient of skewness and kurtosis, which is related that the one is the asymmetry and the other peakness of local void fraction distribution was influenced by flow pattern, annular gap size and radial location.

  • PDF

위키피디어 기반 개념 공간을 가지는 시멘틱 텍스트 모델 (A Semantic Text Model with Wikipedia-based Concept Space)

  • 김한준;장재영
    • 한국전자거래학회지
    • /
    • 제19권3호
    • /
    • pp.107-123
    • /
    • 2014
  • 텍스트마이닝 연구의 기본적인 난제는 기존 텍스트 표현모델이 자연어 문장으로 기술된 텍스트 데이터로부터 의미 또는 개념 정보를 표현하지 않는데 기인한다. 기존 텍스트 표현모델인 벡터공간 모델(vector space model), 불리언 모델(Boolean model), 통계 모델(statistical model), 텐서공간 모델(tensor space model) 등은 'Bag-of-Words' 방식에 바탕을 두고 있다. 이러한 텍스트 모델들은 텍스트에 포함된 단어와 그것의 출현 횟수만으로 텍스트를 표현하므로, 단어의 함축 의미, 단어의 순서 및 텍스트의 구조를 전혀 표현하지 못한다. 대부분의 텍스트 마이닝 기술은 대상 문서를 'Bag-of-Words' 방식의 텍스트 모델로 표현함을 전제로 하여 발전하여 왔다. 하지만 오늘날 빅데이터 시대를 맞이하여 방대한 규모의 텍스트 데이터를 보다 정밀하게 분석할 수 있는 새로운 패러다임의 표현모델을 요구하고 있다. 본 논문에서 제안하는 텍스트 표현모델은 개념공간을 문서 및 단어와 동등한 매핑 공간으로 상정하여, 그 세 가지 공간에 대한 연관 관계를 모두 표현한다. 개념공간의 구성을 위해서 위키피디어 데이터를 활용하며, 하나의 개념은 하나의 위키피디어 페이지로부터 정의된다. 결과적으로 주어진 텍스트 문서집합을 의미적으로 해석이 가능한 3차 텐서(3-order tensor)로 표현하게 되며, 따라서 제안 모델을 텍스트 큐보이드 모델이라 명명한다. 20Newsgroup 문서집합을 사용하여 문서 및 개념 수준의 클러스터링 정확도를 평가함으로써, 제안 모델이 'Bag-of-Word' 방식의 대표적 모델인 벡터공간 모델에 비해 우수함을 보인다.

무선 센서 네트워크에서 연결된 선택적 활성화 기법을 사용하는 강건한 연속 객체 추적 프로토콜 (A Robust Continuous Object Tracking Protocol Using Chained Selective Wakeup Strategy in Wireless Sensor Networks)

  • 홍형섭;김상하
    • 한국통신학회논문지
    • /
    • 제38B권1호
    • /
    • pp.72-79
    • /
    • 2013
  • 무선 센서 네트워크에서 선택적 활성화 기법은 객체를 감지하고 추적하는데 있어 에너지를 절약하기 위해 사용되는 기법이다. 최근 산불, 유해가스와 같은 연속객체를 추적하는데 선택적 활성화 기법을 사용한 프로토콜들이 제안되었는데 이들은 연속객체의 모양을 예측을 통해 그 객체의 경계 지역만 활성화하는 방법을 사용한다. 이 방법은 균일한 분포로 설치되어 있는 센서 네트워크에서는 잘 동작한다. 하지만, 현실적으로 랜덤하게 분포되어지는 무선 센서 네트워크에는 그대로 적용할 수 없다. 활성화 메시지는 순차적으로 전달되는데, 예측된 다음 경계 지역이 보이드 지역 내부에 위치했을 때, 이 활성화 메시지는 예측된 지역으로 전달될 수 없다. 이 때문에 센서가 적절한 시간에 활성화 되지 못하게 되고 센서는 많은 감지 오류를 유발하게 된다. 더욱이, 한번 활성화 제어가 실패하면 다음 활성화 제어도 실패할 확률이 매우 높다. 본 논문에서는 무선 센서 네트워크에서 강건한 연속객체 추적을 위한 연결된 선택적 활성화 기법을 제안한다. 제안된 프로토콜은 네트워크 설정시 보이드 지역 정보 수집 후 그 정보를 고려하여 센서를 활성화 한다.

에너지원의 종류에 따른 비닐평형코드(VFF)의 소손원인 판정기법에 관한 연구 (Study of the Method to Examine the Cause of Damage to a Flat-Type Vinyl Cord (VFF) According to the Type of Energy Source)

  • 최충석
    • 한국화재소방학회논문지
    • /
    • 제25권6호
    • /
    • pp.83-88
    • /
    • 2011
  • 본 연구에서는 전기기기 및 가전기기 등의 배선으로 사용되는 비닐코드의 구조 및 특성을 제시하고, 에너지원의 종류에 따라 소손된 비닐평형코드(VFF, $1.25mm^2$)의 실체 사진 및 용융된 도체의 금속 단면 구조를 분석하였다. 정상 VFF는 소선 여러 가닥을 꼬아서 제작되었으며, 도체의 표면은 적갈색이다. 또한 도체의 금속 조직 분석에서 그레인이 연신된 것을 알 수 있었다. 일반 화염에 의해 소손된 VFF의 표면은 절연물이 탄화되어 도체의 표면에 융착되었고, 윤기가 없는 것을 알 수 있었다. 또한 용융 부분의 단면 구조 분석에서 일정한 모양의 보이드가 형성되었고, 전선 고유의 연신 구조는 확인할 수 없었다. 통전중인 VFF에 외부 화염이 인가되어 소손된 용융 도체의 단면 분석에서 전선 고유의 연신 구조는 없었고, 불규칙적인 보이드 및 주상 조직 등이 성장한 것을 알 수 있었다. 과전류에 의해 소손된 VFF는 표면이 고르게 탄화되었으며, 용융된 도체의 단면 구조 분석에서 수지상 조직의 성장이 확인되었다. 단락에 의해 용융된 VFF의 특성 분석에서 표면의 일부가 오염되었지만 약간의 윤기가 있고, 용융되어 재결합한 부분이 둥근 모양을 나타냈다. 또한 금속 현미경을 이용한 단면 구조 분석에서 경계면 및 주상 조직 등이 확인되었고, 용융된 도체 이외의 부분에서는 정상 구리와 같은 비정질체인 구조가 확인되었다.

기-액(氣-液) 2상유동(二相流動)시 항력(抗力)에 관(關)한 연구(硏究) (The Study on the Drag Reduction for Gas/Liquid Two Phase Flow)

  • 차경옥;오율권;김재근
    • 한국분무공학회지
    • /
    • 제1권3호
    • /
    • pp.20-28
    • /
    • 1996
  • It is well known that drag reduction in single phase liquid flow is affected by polymer material, molecular weight, polymer concentration, pipe diameter, and flow velocity. Drag reduction in two phase flow can be applied to the transport of crude oil, phase change system such as chemical reactor, pool and boiling flow, and to present cavitation which occurs in pump impellers. But the research of drag reduction in two phase flow is not sufficient. The purpose of the present work is to evaluate the drag reduction by measuring pressure drop, void fraction whether polymer is added in the horizontal two phase system or not. Experiment has been conducted in a test section with 24 m of the inner diameter and 1,500 mm of the length. The used polymer materials are two kinds of polyacrylamide[PAAM] and co-polymer[A611P]. The polymer concentration was varied with 50, 100 and 200 ppm under the same experimental conditions. Experimental results were shown that the drag is higher reduced by co-polymer rather than polyanylamide.

  • PDF