• Proceedings of the KIEE Conference
• /
• 2009.04b
• /
• pp.118-120
• /
• 2009

본 논문에서는 직접 전력변환방식의 단상 sag/swell 보상기를 구현하였다. 제안된 보상기는 정현파 입력/ 출력 필터, 직렬연결 변압기와 dc 링크 커패시터부가 없는 단상 back-to-back PWM컨버터로 구성되어 있다. 이 보상기의 장점은 dc-link 진해 커패시터가 제거되어 전력회로부가 간단하게 구현되어 향상된 신뢰성 및 내구성을 확인 할 수 있으며 동시에 단상 전압 sag/swell을 보상하며 스위칭 손실을 줄이는 간단한 PWM 방법을 들 수 있다. 더구나, 제안된 방법은 일반적인 직접 전력변환방식에서 요구되어지는 복잡한 4-step 전류 방법이 필요 없는 간단한 전류제어방법을 채용할 수 있는 구조이며 제안된 보상기의 구조와 PWM 방법의 타당성을 프로토타입 하드웨어를 제작하여 실험결과로 보상기의 우수성을 확인하였다.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2013.05a
• /
• pp.795-797
• /
• 2013

This paper describes a charge sharing capacitive-sensing circuit technique that improves the quality of images captured with fingerprint sensor LSIs. When the finger is dry, the electrical resistance of a finger surface is high. It leads to poor image quality. To capture clear images even when the finger is dry, the modified capacitive detection circuit improves the image quality using an enhancement plate at the finger surface and a voltage control circuit. The test circuit is analyzed on $0.35{\mu}m$ CMOS process.

• Journal of IKEEE
• /
• v.13 no.3
• /
• pp.1-6
• /
• 2009

In this paper, the external matching circuits were designed in order to compensate the efficiency which decreases by human body effect in the internal antenna phone. Comparing the two types of matching circuit, we selected the structure to minimize the switch stress. RF MEMS switch using low voltage was compared with FET switch and measured the performance in the handset. Here, the detection circuit which can couple th reflection power from antenna was added in the handset and we set up the demonstration system that can compensate the loss of hand effect automatically. In this system, when hand effect occurred, the radiation power increased 2.5dB by operation the matching circuit.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.46 no.8
• /
• pp.12-17
• /
• 2009

We have implement어 a bust mode optical transmitter using digital temperature compensation architecture with a microprocessor. Instead of previous analog real time technique, we used digital sampling and holding technique for the temperature compensation in order to get stable high speed data transmission of the laser diode. This digital temperature compensation technique should be complemented the previous analog method with accuracy and effectiveness in the over Gb/s transmitting application.

• Proceedings of the KIPE Conference
• /
• 2016.07a
• /
• pp.93-94
• /
• 2016

산업용 인버터는 운전상황에 따라 캐리어 주파수와 부하전류가 변하게 되며, 이 때 제어기 내부 회로 소자의 Propagation 지연에 따른 Dead Time의 왜곡 그리고 출력전류크기에 따른 전략소자 내부의 전압강하 등에 의해 전압의 왜곡이 발생하여 전동기 토크진동의 원인이 된다. 이를 방지하기 위하여 상황에 따라 출력전압을 보상해야 한다. 특히 전략소자의 전압강하는 전류의 크기에 따라 변하므로 캐리어 주파수에 의한 보상뿐만 아니라 부하전류의 크기에 따른 출력전압을 보상해야 한다. 본 연구에서는 캐리어 주파수 변화에 따른 전압보상량을 기준으로 출력전류 크기에 따른 보상방법 중 비선형적으로 변하는 저전류 영역에서의 전력소자 진압 강하량을 개선하는 보상방법을 제시하였고, 그 유효성을 실험을 통해 검증하였다.

• 전자공학회논문지 IE
• /
• v.44 no.3
• /
• pp.35-41
• /
• 2007

In this paper we suggest a model that the virtual robot based on artificial intelligence performs learning with compensation signals and compare the leaning speed of the virtual robot according to the compensation method after applying it to three type environments. As a result our model has showed that positive compensation is superior to hybrid one mixed positive and negative if there are enough time for learning in case of more or less complicated environment with the numerous foods, obstacles and robots. Otherwise hybrid method is better than positive one.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• v.9 no.1
• /
• pp.995-998
• /
• 2005

This paper proposes a new SoC (System-on-Chip)-based automatic compensation circuit (ACC) for 5GHz low noise amplifier (LNA). This circuit is extremely useful for today's RF IC (Radio Frequency Integrated Circuit) devices in a complete RF transceiver environment. The circuit contains RF BIST (Built-ln Self-Test) circuit, Capacitor Mirror Banks (CMB) and digital processing unit (DPU). The ACC automatically adjusts performance of 5GHz LNA by the processor in the SoC transceiver when the LNA goes out of the normal range of operation.

• 발명특허
• /
• v.9 no.4 s.98
• /
• pp.27-29
• /
• 1984

• Korean Journal of Optics and Photonics
• /
• v.14 no.1
• /
• pp.72-79
• /
• 2003

We proposed a noble algorithm using DOP (degree of polarization) not only as feedback signal but alto as feed-forward signal for the compensation of higher-order PMD effect. In the proposed algorithm, DOP after the first-order PMD compensation is considered as the indicator of the amount of residual higher-order PMD. This algorithm has the merit that DOF (degree of freedom) of the system can be limited to the level of the first-order PMD compensation system. Owing to the limited DOF, the reliability of the system can be enhanced and the complexity of the implementation can be degraded. For the analysis of the algorithm, we simulated the 10Gbps NRZ transmission system and obtained the result that the system outage probability can be reduced as much as three times with respect to the only first-order PMD compensation case.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.13 no.10
• /
• pp.1025-1033
• /
• 2002

This paper presents temperature-compensation circuits of Ku-band amplifiers for satellite payload. After carefully investigating design specifications of Ku-band amplifiers for satellite payload, we designed three types or temperature-compensation circuits, which are an active bias circuit, an attenuator control, and an ALC loop circuit. Our design technique demonstrates good agreement between measured and predicted results. These temperature-compensation circuits are suitable for Ku-band satellite payload active components, such as channel amplifiers, LNA and IF amplifiers.