• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2015.10a
• /
• pp.420-423
• /
• 2015

This paper proposes a method of non-linearity error detection and calibration for binary-weighted charge-driven DACs. In general, the non-linearity errors of DACs often occur due to the mismatch of layout designs or process variation, even when careful layout design methods and process calibration are adopted. Since such errors can substantially degrade the SNDR performance of DAC, it is crucial to accurately measure the errors and calibrate the design mismatches. The proposed method employs 2 identical DAC circuits. The 2 DACs are sweeped, respectively, by using 2 digital input counters with a fixed difference. A comparator identifies any non-linearity errors larger than an acceptable discrepancy. We also propose a calibration method that can fine-tune the DAC's capacitor sizes iteratively until the comparator finds no further errors. Simulations are presented, which show that the proposed method is effective to detect the non-linearity errors and calibrate the capacitor mismatches of a 12-bit DAC design of binary-weighted charge-driven structure.

• Korean Journal of Environment and Ecology
• /
• v.15 no.1
• /
• pp.39-56
• /
• 2001

본 연구는 국토의 친환경적 개발을 위한 제도적 장치 중 하나인 환경성검토의 강화방안을 마련하고자 경기도 남양주시 오남면 팔현리 일대의 골프장개발예정자를 대상으로 한 환경성검토서를 분석하였으며, 또한 대상지의 정확한 평가를 위해 현존식생도, 녹지자연도, 군집의 발달기원, 천이단계, 군집의 희소성, 식물의 희소성 판단의 6개 항목을 선정, 적용한 결과 본 대상지는 개발계획읜 축소. 조정항목으로 판단되었다. 친환경적인 개발을 위한 환경성검토 강화방안을 계획적인 측면에서는 적정대상지의 선정과 이식수목의 산정을 제도적인 측면에서 표토보존 및 이용에 관한 법률과 자연훼손보상제도를 제안하였다. 추가조상대상지역(면적: 1.436, DGN 7이 254, 587$\m^2$. DGN7(8)이 207,235$\m^2$ DGN 5가 163,259$\m^2$, DGN 2는 184,129$\m^2$로 나타나 대상지와 추가조사지역 일부를 포함한 적정대상지를 선정하였다. 이식수종은 성상별로 소나무 1종, 낙엽활엽교목 19종, 낙엽활엽아교목 11종, 낙엽관목 30종, 만경목 11종이었고, 이식가능면적은 639,310$\m^2$이었으나, 보존지역을 제외한 실제 이식가능한 지역은 275, 366$\m^2$으로 나타났다. 대상지의 내 이용가능한 표토량은 137.681㎥이었으며, 보존지역 중 불가피한 훼손면적은 43,938$\m^2$로 나타나 이에 상응하는 가치의 습지나 소생물권 등을 조성하여야 할 것이다.

• Journal of Korea Multimedia Society
• /
• v.16 no.3
• /
• pp.281-289
• /
• 2013

The iCAM06 has been used as an image appearance model for HDR image rendering. The iCAM06 goes through the color space conversions and scale conversions of the several steps to present HDR images. The dynamic range of an HDR image needs to be mapped on the range of output devices, which is called the tone mapping. However, tone compression process of the iCAM06 causes color distortion because of color-clipping and cross-stimulus. Therefore, we proposed that a color correction method in IPT space which compensates the color distortion in tone compression process. Through the experimental results, we conformed that proposed color correction method had better performance than the iCAM06 and enhanced models.

• Journal of Digital Convergence
• /
• v.16 no.12
• /
• pp.231-241
• /
• 2018

This is a study of reputation from the perspective of evolutionary psychology. To start a theory building process in PR, Tall Puppy scale is examined using dominance hierarchy and reputation hierarchy. Tall Puppy scale is a measure toward highly successful, thus famous people. when they fall. The result showed that Koreans have negative attitude toward famous people 8times more and prefer their fall than Austrailians. The number one variable to explain the psychology of reputation hierarchy was self-esteem. It was strongly correlated with reputation hierarchy attitude. People with higher self-esteem were more generous about famous figures when people with low self-esteem prefer more the fall of tall puppies. A discussion for reputation hierarchy theory is followed.

• Journal of the Korean Institute of Telematics and Electronics D
• /
• v.35D no.11
• /
• pp.31-37
• /
• 1998

Magnitude/phase controlling circuit which is composed of attenuator and phase shifter make phase/gain cross-coupling, so too much tuning time is needed to find optimum operation point. In this paper, vector attenuator which control magnitude and phase of input signals is proposed. Vector attenuator in past ignores phase variation characteristics of attenuator, but vector attenuator of this paper compensates phase variation characteristics of attenuator. This vector attenuator consists of 0$^{\circ}$/180$^{\circ}$ phase shifter and low phase shifting attenuator and so forth. A 0$^{\circ}$/180$^{\circ}$ phase shifter has 0$^{\circ}$/179.9$^{\circ}$ phase shifting characteristics at a center frequency 881 MHz and a low phase shifting attenuator has an attenuation of 25dB, within the limit of 3.6$^{\circ}$ phase shift and less than -20dB reflection characteristics at both input and output ports. The designed vector attenuator shows that cartesian coordinate plane of output signal space can be represented correctly.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.15 no.4
• /
• pp.191-198
• /
• 2015

The purpose of this study is to develope a current variation control system appropriate to the various LED(Light Emitting Diode) lamps using current control system equipped with microcontroller based voltage regulator of power driving circuit. For this, we will suggest a stable control system of current variation to enable a stable power-supply and current-control, consisting of circuit to minimize the affects on the LED forward voltage using variable resistance and compensating resistance. The method of constant current circuit and energy savings using microcontroller based voltage regulator suggested in this study can be applied to various a big capacity LED lamp to minimize the unnecessay heat generation and to control resistace delicately. Ultimately, we expect the results of this study will upgrade the reliability of LED lamp by supplying the current stably.

• Journal of Korean Society of Transportation
• /
• v.29 no.6
• /
• pp.107-116
• /
• 2011

In this paper, we implement an algorithm of transit signal priority control that not only maximizes service quality and efficiency of bus, but also minimizes the control delay of passenger cars using UTIS currently being deployed and operated in Seoul national capital area. For this purpose, we propose an algorithm that coordinates the strength of TSP by estimating bus demand. Typically, the higher the strength of TSP is on main street, the bigger the control delay is on the cross street. Motivated by this practical difficulty, we proposes an algorithm that coordinates TSP's strength by checking the degree of saturation of cross street. Also, we verify the possibility of field implementation via simulation analysis using CORSIM RTE based HILS (Hardware In the Loop Simulation). The result shows that travel time of bus improves about 10 percent without increasing control delay of passenger cars by TSP. We expect the result of this research to contribute to increasing the overall transit ridership in this country.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.31 no.7C
• /
• pp.735-742
• /
• 2006

In this paper, we explain the operation scheme and fixed-point design method of DFE (Digital Front End), which performs DC offset compensation, automatic frequency control, and automatic gain control over the input signal to the UE (User Equipment) receiver of IEEE 802.16e OFDMA-TDD system. Then, we analyze the performance of DFE under ITU-R M. 1225 Veh-A 60km/h channel environment. To optimize the fixed-point design of DFE, we reduce the number of bit resulted from calculation without performance degradation, leading to the decreased complexity of the operation in H/W, and design the Loop filter with considering trade-off between the Acquisition time and the Stability.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.19 no.3
• /
• pp.10-16
• /
• 2005

This paper suggested the sulfur lamp power supply using Fuzzy Gain Scheduling(FGS), which was designed and confirmed the performance through manufacturing. it was based on Series Resonant Half Bridge Inverter(SRHBI), so that was applied Pulse Frequency Modulation(PFM), Zero Voltage Switching(ZVS), soft switching and soft start for input power variation and output power compensation. In order to get the lengthened life time of magnetron and stabilized output or power, power ratter and efficiency were improved by fuzzy gain algorism. It also made it possible to get not the existing foxed output power but continuous variable output power$(900\~1250[W])$. The manufactured power supply showed good results in input power $220[V]{\pm}15[\%]$ with stabilized output of power, luminous efficiency 97[1m/W] and power factor $96[\%]$.

• Journal of the Institute of Convergence Signal Processing
• /
• v.23 no.4
• /
• pp.185-193
• /
• 2022

This paper proposes an adaptive sliding mode control with radial basis function neural network(RBFNN) scheme to enhance the performance of position and attitude tracking control of quadrotor UAV. The RBFNN is utilized on the approximation of nonlinear function in the UAV dynmic model and the weights of the RBFNN are adjusted online according to adaptive law from the Lyapunov stability analysis to ensure the state hitting the sliding surface and sliding along it. In order to compensate the network approximation error and eliminate the existing chattering problems, the sliding mode control term is adjusted by adaptive laws, which can enhance the robust performance of the system. The simulation results of the proposed control method confirm the effectiveness of the proposed controller which applied for a nonlinear quadrotor UAV is presented. Form the results, it's shown that the developed control system is achieved satisfactory control performance and robustness.