• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2009.10a
• /
• pp.749-751
• /
• 2009

Optical link design technique for compensating of distorted 40 Gbps ${\times}$ 24 channels WDM signals is researched. The considered optical link consists of optical phase conjugator (OPC) placed at 100 km and 900 km, which are non-midway of total transmission distance, and dispersion management (DM). It is confirmed that optimal net residual dispersions (NRD) are 800 ps/nm and 900 ps/nm when OPC placed at 100 km and 900 km, respectively.

• Journal of Advanced Navigation Technology
• /
• v.25 no.4
• /
• pp.286-292
• /
• 2021

Dispersion maps of antipodal symmetric type for improvement of compensation effect in dispersion managed link combined with optical phase conjugation, which can compensate for the distorted wavelength division multiplexed (WDM) signals due to chromatic dispersion and nonlinear Kerr effects of single-mode fiber, were proposed. It was confirmed that the proposed all of antipodal symmetric dispersion maps was more effective to compensate for the distorted WDM channels than the conventional link of uniform type dispersion map. Especially, dispersion maps formed like the inversion of alphabet S were more advantageous as the distorted WDM channels were compensated than dispersion maps formed like alphabet S. It was expected that the variety of optical network topology was more expanded by applying the proposed antipodal symmetric dispersion maps into transmission link.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.47 no.10
• /
• pp.34-41
• /
• 2010

We proposed the new pixel compensation circuit with high aperture ratio and the driving method for the large-area, low-power AMOLED applications in this study. We designed with the low-temperature poly-silicon(LTPS) thin film transistors(TFTs) that has poor uniformity but good mobility and stability. To lower the error rate of the pixel circuit and to improve the aperture ratio for bottom emission method, we simplified the pixel compensation circuit. Because the proposed pixel compensation circuit with high aperture ratio has very low contrast ratio for conventional driving methods, we proposed the new driving method and circuit for high contrast ratio. Black data insertion was introduced to improve the characteristics for moving images. The pixel circuit was designed for 19.6" WXGA bottom-emission AMOLED panel, and the average aperture ratio of the pixel circuit is improved from 33.0% to 41.9%. For the TFT's $V_{TH}$ variation of ${\pm}0.2\;V$, the non-uniformity and contrast ratio of the designed panel was estimated under 6% and over 100000:1 respectively.

• Journal of Advanced Marine Engineering and Technology
• /
• v.41 no.1
• /
• pp.105-110
• /
• 2017

This paper introduces a heave compensation system for offshore crane when it subjected to unexpected disturbances such as ocean waves, tidal currents or winds and their external force. The dynamic model consists of a crane which is considered to behave in the same manner as a rigid body, a hydraulic driven winch, an elastic rope and a payload. To keep the payload from moving upwards and downwards, PD(Proportional-Derivative) control was applied by using linearization. In order to achieve a better performance, the sliding mode control and the nonlinear generalized predictive control algorithm was applied according to the time-delay. As a result, the oscillating amplitude of the payload was reduced by the control algorithm. Considering the time-delay involved in the system to be one second, nonlinear generalized predictive controller with a robust controller was a suitable control algorithm for this heave compensation system because it made the position of te payload reach the desired position with the minimum error. This paper presented a control algorithm using the robust control and its simulation results.

• Journal of Broadcast Engineering
• /
• v.8 no.2
• /
• pp.181-197
• /
• 2003

Notion Compensation(MC) technique using Sub-Band Coding with the hierarchical structure is efficient to estimate real motion. In the hierarchical pyramid method, low-band MC pyramid method is popular, where the upper layer estimate the glover motion and next lower layer estimate the local motion. The low-band MC pyramid scheme has two problems. First, because the quantization errors at lower layer are accumulated when using coding and quantizing, it is impossible to search the exact Motion Vector(MV) Second, because of the top-down search problem in the hierarchical structure, MV mismatch in upper layer causes serious MV in lower layer So. we propose new hierarchical MC pyramid method based on edge classification. In this Paper, we show that the performance of proposed Pass-band motion compensation pyramid technique is better than low-band motion compensation pyramid. Also, in the pyramid motion estimation, we propose initial MV estimation scheme based on the edge-pattern classification. As a result, we find that PSNR was increased.

• Journal of Advanced Navigation Technology
• /
• v.17 no.1
• /
• pp.16-23
• /
• 2013

The effects of dispersion coefficient of dispersion compensating fiber (DCF) and residual dispersion per span (RDPS) on in the dispersion managed optical links for compensating the distorted 960 Gbps wavelength division multiplexd (WDM) signals due to group velocity dispersion (GVD) and optical nonlinear effects of single mode fiber (SMF) are investigated. It is confirmed that optimal net residual dispersion (NRD), which greatly affects compensating for optical signals, should be induced under the large launch power condition, irrelevant on the considered dispersion coefficient of DCF and RDPS. It is also confirmed that system performances are greatly improved by selecting the very small RDPS and very large dispersion coefficient of DCF.

• Broadcasting and Media Magazine
• /
• v.7 no.3
• /
• pp.19-23
• /
• 2002

본 장에서는 H.26L 비디오 코덱에 적용되는 움직임 보상 기법(motion compensation) 및 B 픽쳐(Bi-predictive picture) 에 대해 다루기로 한다. 먼저 H.26L 비디오 코덱이 H.263 또는 MPEG-4 Part 2와 같은 종래 비디오 코덱들과 움직임 보상 관점에서 다른 점을 살펴보면, 복수개의 레퍼런스 픽쳐(multiple reference picture) 로부터 움직임 추정 (motion estimation) 밀 움직임 보상을 수행하고, 16x16 매크로 블록 크기부터 16x8, 8x16, 8x8블록 크기에서 매크로 블록 모드 타입이 결정되고 8x8 모드는 다시 8x4, 4x8, 4x4 단위에서 서브 모드 타입이 결정된다. 따라서 한 개의 매크로블록은 최대 16개의 모션벡터를 깆을 수 있다. 또한 복수개의 레퍼런스 픽쳐와 다양한 블록 타입을 적용함에 따라 모션벡터 예측(PMV: prediction of motion vector) 은 현재 블록과 이웃하는 블록들 사이의 레퍼런스 픽쳐 인덱스 비교 및 현재 블록 타입이 16x8또는 8x16 일 때 방향성 예측을 허용하는 새로운 기법들이 소개되어 있다. 그리고 코딩 효율을 높이기 위한 방법으로서 1/4 pel 단위의 움직임 보상을 하여 블록의 예측 정확도를 높이도록 하고 있다. 한편, H.26L에서의 B 픽쳐는 종래 비디오 코덱에 비해 확장된 정의를 갖고 있다. 예를 들어, 종래의 비디오 코덱에서는 B 픽쳐가 시간 스케일러빌러티(temporal scalability)에 사용됨에 따라 레퍼런스 픽쳐로서 사용될 수 없지만, H.26L은 B 픽쳐가 레퍼런스 픽쳐로서 사용되는 것을 허용하고 있다. 또한 종래의 B 픽쳐가 양방향에서 움직임 보상을 한 것과 달리 H.26L은 동일 방향에 존재하는 두개의 레퍼런스 픽쳐에서도 움직임 보상을 허용한다.

• The Journal of the Korea Contents Association
• /
• v.13 no.5
• /
• pp.28-36
• /
• 2013

Motion-compensated frame interpolation (MCFI) techniques in video signal processing have many application areas. Frame rate up-conversion (FRUC) or distributed video coding (DVC) technique needs an effective MCFI algorithm. For these applications, it is necessary to develop an effective post-processing technique to improve visual qualities or to reduce virtual channel noises, resulting in the reduced channel bit rate. This paper proposes a reliability evaluation method based on spatio-temporal characteristics for motion-compensated interpolated blocks. The proposed algorithm investigates the temporal matching characteristics for current frame and then is designed in such a way that it can measure temporal characteristics as well as the spatial ones. Through computer simulations, it is shown that the proposed method outperforms the conventional temporal matching method.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.44 no.3 s.357
• /
• pp.65-71
• /
• 2007

We propose a pixel-level automatic calibration circuit scheme that initializes a capacitive fingerprint sensor LSI to eliminate the influence of the surface condition and environment, which is degraded by dirt during long-time use, process variation and ambient temperature. The sample chip is fabricated on $0.35{\mu}m$ standard CMOS process. The calibration is executed by optimizing the reference voltage in each pixel to make the sensor signals of all pixels the same. The calibration control circuit is composed of the sensing circuit and charge pumping circuit, and calibrates all pixels in a short time. 16-level gray scale fingerprint images can be captured to increase the accuracy of identification. This confirms that the scheme is effective for capturing consistent clear images during long-time use.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.36 no.1
• /
• pp.103-108
• /
• 2012

In this paper, the optimal design of a spring-type gravity compensation system for an articulated robot is presented. Sequential quadratic programming (SQP) is adopted to resolve various nonlinear constraints in spring design such as stress, buckling, and fatigue constraints, and to reduce computation time. In addition, continuous relaxation method is used to explain the integer-valued design variables. The simulation results show that the gravity compensation system designed by proposed method improves the performance effectively without additional weight gain in the main workspace.