• 한국자동차공학회논문집
• /
• 제18권2호
• /
• pp.61-66
• /
• 2010

A virtual manufacturing system that is composed of JMatPro, a material modeler and $DEFORM^{TM}$-HT, a finite element package is applied to the hot press forming process: high temperature material properties for each phase such as flow stress, elastic modulus, Poisson's ratio, thermal expansion coefficient, in addition to TTT curve are predicted by JMatPro and taken into $DEFORM^{TM}$-HT to predict the material behavior considering phase transformation and heat transfer simultaneously. In order to verify the accuracy of computation, the residual stress and the springback were compared with the experimental measurements. Both the predicted and measured principal residual stresses and amount of springback were in good agreement. It was also found that the residual stresses generated from hot press forming are not negligible as it has been generally assumed, although the springback deformation is quite small.

• 대한기계학회논문집A
• /
• 제34권10호
• /
• pp.1419-1425
• /
• 2010

열간성형된 보론강판은 고강도특성이 필요한 자동차 부품에 널리 적용되고 있으며, 최근에는 샤시 부품에도 점차로 적용되고 있다. 샤시 부품으로 적용되기 위해서 고강도 특성뿐만 아니라 내피로특성이 동시에 요구되고 있어, 본 연구에서 열간성형된 보론강판의 저주기 피로특성을 연구하였다. 저주기 피로시험결과, 총변형률 진폭이 낮은 영역에서는 열간성형된 보론강의 피로수명이 현저히 높았지만, 높은 총변형률 진폭에서는 열간성형된 보론강의 마르텐사이트 조직특성인 낮은 연성과 파괴인성으로 인해서 보론강 원소재의 피로수명이 더 높음을 확인할 수 있었다.

• 한국영양학회:학술대회논문집
• /
• 한국영양학회 2003년도 추계학술대회 및 정기총회
• /
• pp.95-95
• /
• 2003

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2010년도 추계학술대회 논문집
• /
• pp.829-830
• /
• 2010

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2008년도 춘계학술대회 논문집
• /
• pp.493-496
• /
• 2008

The residual stress generated in the boron steel blank formed via hot press forming process was predicted by JMatPro, a material property modeler, and Abaqus. The numerical predictions were compared by the experimental measurements obtained by the instrumented indentation. Both the predicted and measured principal stresses monitored at the outer surface of central bending position were qualitatively in good agreement. It was concluded that the residual stresses generated from hot forming process is not negligible as it has been generally assumed, although the spring back deformation is quite small. This should be specially considered from the part design stage since the tensile nature of the residual stress exhibited on the surface may lead to the stress corrosion cracking.

• 한국자동차공학회논문집
• /
• 제20권2호
• /
• pp.98-102
• /
• 2012

Increasing the fuel economy has been an inevitable issue for the development of new cars, and one of the important measures to improve the fuel economy is to decrease the vehicle weight. In order to obtain this goal, the researches about lighter, stronger and the well impact absorbing bumper impact beam have been studied without sacrificing bumper safety. In this study, the overall weight reduction possibility of rear bumper impact beam could be examined based on the variation of frontal, offset and corner impact crash capability by substituting a ultra high strength steel material (boron steel ) having tensile strength of 1.5 GPa grade instead of conventional steels. In addition, the section variations (open section, closed section, open section with 5 stays) of the bumper impact beam structure were examined carefully. It could be reached that this analysis could be well established and be contributed for design guide and the optimum design conditions of the automotive rear bumper impact beam development.

• 대한용접접합학회:학술대회논문집
• /
• 대한용접접합학회 1997년도 특별강연 및 춘계학술발표 개요집
• /
• pp.105-106
• /
• 1997

• 한국영양학회:학술대회논문집
• /
• 한국영양학회 2003년도 추계학술대회 및 정기총회
• /
• pp.96-96
• /
• 2003

• 대한용접접합학회:학술대회논문집
• /
• 대한용접접합학회 1998년도 특별강연 및 춘계학술발표 개요집
• /
• pp.131-132
• /
• 1998

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2009년도 추계학술대회 논문집
• /
• pp.499-500
• /
• 2009