• Journal of the Korean Geotechnical Society
• /
• v.16 no.5
• /
• pp.75-81
• /
• 2000

본 연구에서는 진동대 시험을 실시하여 지진동에 대한 일반 안벽 구조물과 내진 보강된 안벽 구조물의 동적거동을 분석하고 내진보강기법의 성능을 평가하였다. 진동대 시험은 기초지반이 조밀한 경우와 느슨한 경우, 자갈 뒤채움재를 설치한 경우 그리고 내진대책공법으로 경량재 치환공법과 모래다짐말뚝 공법을 적용한 경우 등 총 5가지 시험단면에 대하여 실시하였다. 과잉간극수압, 가속도 반응 그리고 지반의 변형양상을 분석한 결과, 기초지반과 뒤채움 지반의 연약화가 안벽 구조물의 동적거동에 큰 영향을 미치며, 경량재 치환공법과 모래다짐말뚝공법이 안벽 구조물의 내진성능을 향상시키는에 효과적인 것으로 나타났다.

• Proceedings of the Korean Society for Rock Mechanics Conference
• /
• 2003.03a
• /
• pp.121-134
• /
• 2003

본 연구대상은 $\bigcirc$$\bigcirc$우회도로 Sta.3＋300~600 구간에 형성된 높이 약 50m의 대절토 암반사면으로 대부분 절취가 완료된 상태에서, 1차로 사면 좌측부의 발파암과 풍화암의 경계부를 따라 인장균열이 소규모로 형성되면서 Slip 등 사면파괴활동이 시작되었으며, 2차로 활동높이 35m, 활동폭 40m, 활동깊이 약 l0m 규모로 붕괴되었고, 주변에도 인장균열의 발생이 확인되는 등 추가 붕괴의 징후가 있어 사면의 안정성을 검토하였다. Rock Cleavages가 발달한 천매암으로 구성된 파괴활동사면을 대상으로 지표지질조사, 추가시추조사, 전기비저항탐사, 시추공 영상촬영(BIPS)을 실시하여 사면붕괴의 원인과 추후에 예상되는 붕괴의 양상을 파악하고, 연구지역에 가장 적합한 보강대책을 수립하고자 하였다.

• Proceedings of the Korean Society of Disaster Information Conference
• /
• 2023.11a
• /
• pp.105-106
• /
• 2023

본연구는 콘크리트 타설과정에서 반복되는 펌프카 사고를 예방하기 위해서 설계 및 제작의 품질관리와 현(現))정기검사 기준을 개선해야 한다는 점을 제안하며, Booms 파단 사고 예방대책 제시가 목적이고, 최근 1~2년 사이에 발생한 펌프카 기계적 결함 사고의 현황조사와 사고 특징을 분석하고, 펌프카 장비의 검사기준 및 조정원의 자격과 기능교육 기준 마련의 필요성 확인한다. 붐대의 안전성 확인하기 위해서는 선행연구의 구조적 안전성 평가와 최대응력 부위에 대한 선행연구의 유한요소 해석모델 자료를 재분석하고, 2단 붐이 타설중 가장 많은 힘을 받는지와 파괴 가능성을 확인한다. Booms의 유한요소 모델 해석 결과 펌프카는 타설 과정에서 진동으로 피로 하중을 받을 수 있다는 동적해석과 정적해석 재검토 결과 가장 취약한 부위는 2단 붐이었으며, 2st 붐은 제작단계에서 부재 두께를 증가시키고, 상단부에 철판 보강을 권장한다. 펌프카 사고를 방지하기 위해서는 제조사는 생산단계에서 2st Boom 상단에 보강판 부착이 필요하고, 정기검사 비용 현실화와 비파괴 검사를 의무 검사로 반영이 필요하다고 제언한다.

• Journal of Conservation Science
• /
• v.8 no.1 s.11
• /
• pp.40-50
• /
• 1999

A geotechnical research including observation of the movement of wall-structure, monitoring of groundwater, non-destructive geophysical investigation was conducted to workout a countermeasure to conserve the Muryong Royal Tomb which is the most extinguishable cultural property of the Baekje dynasty. Movement of the structure of Muryong Royal Tomb generally arises to the front chamber and its amplitude in a rainy season is twice of that in the dry season. It represents serious problem concerned about structural safety of the royal tomb in the rainy season. Movement of wall-structure is caused due to the rain infiltration through cracks in the quicklime layer within the soil mound on the top of the royal tomb and the change of the temperature inside of the tomb. Cracks found around the Muryong Royal Tomb are mostly spread in NW and SE of the tomb structure and it harmonizes with the direction of movement of wall-structure of the Muryong Royal Tomb. Counter-plans for safety and prevention of water-leakage that obstruct the movement of wall structures towards the direction of south are very important for the conservation of Muryong Royal Tomb. After getting rid of the cause of structural change by the restoration of the front chamber of the Muryong Royal Tomb, it needs to reinforce the quicklime layer for prevention of waterleak.

• The Journal of Engineering Geology
• /
• v.19 no.4
• /
• pp.517-528
• /
• 2009

Statistical analyses of cut-slope stability were performed over approximately 5.7 km section along the National road No. 25, which cross-cuts in NW-SE direction the Cheongwon and Boeun-Gun area, Chungbuk. A measure of slope-stability was established by using direct reinforcement and indirect protection methods in whole section. Orientations(dip/dip direction) of the slopes, foliations(bedding), cleavages and joints were measured in total of 30 slope sites. The results analyzed using stereographic projection indicate that major directions of the slopes come out predominantly in three directions: 1) $58^{\circ}/095^{\circ}$, 2) $60^{\circ}/296^{\circ}$ and 3) $59^{\circ}/212^{\circ}$. In analyses of dip direction and frequency of cut-slopes established by reinforcement and protection methods, slopes with dip direction of $80-120^{\circ}$ and $280-320^{\circ}$ mostly occur. However, slopes with dip direction of $0-80^{\circ}$(N and NW) and $120-160^{\circ}$(SE) are not distributed in the study area. Failure aspects were analyzed for three major directions of the slopes, respectively. The results of failure aspects analyzed indicate that slopes in the study area could generate various failures as the results of intersection and/or intersection combination among joints, foliations(bedding) and cleavages. However, possibility of failure in a slope of major direction No. 3 is statistically very low because of low frequency in total number of slopes with the direction and of formation of small scale-slopes geographically, although the slope might generate all aspects of failure-modes.

• The Journal of Engineering Geology
• /
• v.20 no.3
• /
• pp.257-269
• /
• 2010

We analyzed patent trends regarding stabilization technology for steep slope hazards, focusing on patents applied for and registered in Korea, the USA, Japan, and Europe. The technology was classified into four groups at the second classification step: prediction techniques, instrumentation techniques, countermeasure/reinforcement/mitigation techniques, and laboratory tests. A total of 2,134 patents were selected for the final effective analysis. As a result of portfolio analysis using the correlation between the number of patents and the applicant for each patent, the Korean and USA situations were classified as belonging to the developing period, and the Japanese and European situations were classified as belonging to the ebbing period. In particular, patent activity in Korea has been enlivened by government-led research. As a result of technology analysis at the second classification step, prediction techniques arising from Japan are evaluated as a competitive power technique, and laboratory tests arising from the USA are evaluated as a competitive power technique. However, prediction techniques and laboratory tests arising from Korea are evaluated as a blank technique. According to the prediction results regarding future research and developments, a new finite element analysis method and a numerical model should be established as part of prediction techniques, as well as sensors, and hazard prediction should be developed by integrating information and equipment using IT technology as part of instrumentation techniques. In addition, improvements to existing structures for erosion control and the development of new slope-reinforcement methods are required as part of countermeasure/reinforcement/mitigation techniques, and new laboratory apparatus and methods with an optimizing structure should be developed as part of laboratory tests.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.11
• /
• pp.37-43
• /
• 2020

The seismic reinforcement ratio of SOC facilities, such as domestic roads and railroads, is 96%. Out of approximately 7 million buildings as of 2016, only 0.51 million buildings with seismic performance were secured. Although the proportion of masonry structures is 38.8% of the total buildings, there is almost no seismic resistance, only 2.0%. To solve the problem in Korea, government-level seismic measures are being promoted, but the situation is insufficient. Overseas, the UBC research team in Vancouver, Canada, has developed and used EDCC to reinforce the seismic performance of masonry buildings. EDCC is a construction material that can secure concrete ductility capability by mixing fibers and secure deformation resistance of concrete through bridging action. It is necessary to examine various materials because EDCC is not used as a spray type of secure seismic reinforcement. In this study, as part of the research and development of spraying materials to improve the durability of masonry buildings, this study examined the spraying characteristics of fiber-reinforced mortar according to fiber use and the viscosity change according to the use of thickener. As a result, the working performance of the fiber-reinforced mortar for seismic reinforcement was improved when using 1% fiber and 1% thickener.

• Journal of Korean Society of Steel Construction
• /
• v.22 no.2
• /
• pp.151-160
• /
• 2010

The number of cases of collapsed plastic greenhouses in farmlands has increased due to the heavy local snowfall caused by extraordinary atmospheric phenomena. Consequently, the economic losses of farmers have also increased. However the government policy in relation to damage pretension is insufficient and collapse case is repeated every year. The main reason for frame collapse is that the moment capacity of a steel pipe is not sufficient to resist a heavy snowload. In this study, experiments were conducted on the current frame system of a greenhouse with a tension tie. The frame consisted of two sections(${\phi}25.4{\times}1.5$, ${\phi}31.8{\times}1.5$), and its span length was 6.5 m. A temporary tension tie using a steel wire and a fabric rope was connected to the two joints, to which a curved beam and a straight column were connected. The pretension force was applied at the tension tie, and a vertical force simulating snowfall was applied until failure. The fabric rope frame increased the load-carrying capacity by 10-45% compared to the normal frame without a tension tie, and the steel wire frame increased the load-carrying capacity by 58-73% compared to the normal frame without a tension tie. Steel wire was found to be more effective as far as strength is concerned, but its connection details and pretension application are more difficult and complicated than those of the fabric rope. The test results thus show that the fabric rope is more preferable.

• Journal of the korean Society of Automotive Engineers
• /
• v.5 no.3
• /
• pp.1-7
• /
• 1983

승용차의 차실 내부소음 특성 및 저감에 과한 일련의 고찰로 다음의 결론을 얻었다. (1) 차실 내부소음의 주된 근원은 회전속도의 제이고주파에 해당되는 주파수 성분이 지배적이다. (2) 차실 공진(명) 음은 engine으로부터의 진동 입력에 대한 차체의 ring mode 공진 및 차실 공명현상으로 발생되며 실험 결과는 종래의 연구 결과들과 잘 일치되었다. (3) 차실 내부소음이 차체의 구조, 진동 및 실내 음향공영에 크게 의존하기 때문에, 이 두가지 요소로써 문제의 발견이 가능하며 이들을 이용한 저감대책 수립은 효과적이다. (4) 차실 내부소음의 저감을 위하여 구조적damping이나 흡음재의 적절한 사용 등이 다소의 효 과를 주나 공진(명) 음의 근본적인 대책이 되지 못하며, 차실 공명 특성을 변화시키는 것은 사 실상 불가능하다. (5) 차체의 구조적 진동 특성을 고려하여 보강된 차량의 경우 문제 영역에서의 현저한 소음감 소효과가 얻어졌다. 그러나 이와 같은 방안의 적용은 개발의 초기 단계에서 실시됨이 바람직하다.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.2 no.2
• /
• pp.11-21
• /
• 2000

Tunnelling has been created as a great extent in view of less land space available because the growth of population in metropolitan has been accelerated at a faster pace than the development of the cities. In tunnelling, it is often faced that measures are obliged to be taken without confirmation for such abnormality as diverged movement of surrounding rock mass, growing crack of shotcrete and yielding of rockbolts. In this case, it is usually said that the judgments of experienced engineers for the selection of measure are importance and allowed us to get over the situations in many construction sites. But decrease of such experienced engineers need us to develop the new system to assist the selection of measures for the abnormality without any experiences of similar tunnelling sites. In this study, After a lot of tunnelling reinforcement methods were surveyed and the detail application were studied, an expert system was developed to predict the safety of tunnel and choose proper tunnel reinforcement system using fuzzy quantification theory and fuzzy inference rule based on tunnel information database. The expert system developed in this study have two main parts named pre-module and post-module. Pre-module decides tunnel information imput items based on the tunnel face mapping information which can be easily obtained in-situ site. Then, using fuzzy quantification theory II, fuzzy membership function is composed and tunnel safety level is inferred through this membership function. The comparison result between the predicted reinforcement system level and measured ones was very similar. In-situ data were obtained in three tunnel sites including subway tunnel under Han river. This system will be very helpful to make the most of in-situ data and suggest proper applicability of tunnel reinforcement system developing more resonable tunnel support method from dependance of some experienced experts for the absent of guide.