• Journal of the Institute of Electronics and Information Engineers
• /
• v.50 no.9
• /
• pp.12-20
• /
• 2013

In this paper, a co-planar waveguide(CPW) fed zeroth-order resonant(ZOR) antenna with frequency reconfigurable radiating structures is fabricated and measured. The unit cell of proposed antenna consists of a series metal-insulator-metal(MIM) capacitor and two shunt line inductors which are shorted through the via. The proposed antenna is designed based on a composite right/left-handed(CRLH) transmission line with two unit cells and it has open ended structure in order to radiate electromagnetic energy mainly on the shunt arm. In order to reduce the antenna size and to exhibit a frequency reconfigurable ability using diode switches four straight strips bent by 90 degrees are used as shunt inductors. The total size of fabricated antenna is $0.22{\lambda}_0{\times}0.16{\lambda}_0$ at zeroth-order resonant(ZOR) frequency. The measured maximum gain and bandwidth (VSWR ${\leq}2$) are 3.1 dBi and 56MHz at ZOR frequency of 2.97 GHz, respectively. This type of antenna can be applied to a frequency reconfigurable antenna system with triple bands.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.37 no.3
• /
• pp.307-312
• /
• 2013

The interest in reducing the emissions and increasing the fuel economy of ICE vehicles has prompted research on hybrid vehicles, which come in the series, parallel, and power-split types. This study focuses on the series-type hybrid electric vehicle, which has a simple structure. Because each component of a series hybrid vehicle is larger than the corresponding component of the parallel type, the sizing of the vehicle is very important. This is because the performance may be greater or less than what is required. Thus, in this research, the optimal fuel economy was determined and simulated in a real-world system. The optimal sizing was achieved based on the motor, engine/generator, and battery for 13 cycles, where DP was used. The model was developed using ASCET or a Simulink-Amisim Co-simulation platform on the rapid controller prototype, ES-1000.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.8 no.1
• /
• pp.35-41
• /
• 1997

A series-fed microstrip array antenna of beamwidth $10^{\circ}$, squint angle $80^{\circ}$ and SLL -15 dB below is designed. Series-fed arrays are formed by interconnecting all the elements by high-impedance transmission lines and feeding the power at the first element and it is a traveling-wave antenna which is terminated with a matched load. Radiation patterns and impedance matching of the antenna are analyzed by Ensemble 4.0, which is a popular software package for designing printed antennas and arrays. The squint angle of beam can be controlled by the spacing between the elements. The major advantages of series-fed array antennas are that feed arangement is compact and the losses associated with the feeding network are less than those of a corporate feed type. The antennas are fabricated on the RT/Duroid Laminates of 62 mil thickness. The experimental results are very close to the specifications to be designed.

• Journal of Korean Society for Quality Management
• /
• v.9 no.2
• /
• pp.31-36
• /
• 1981

This paper deals with the reliability optimization of parallel - in - series system subject to several linear constraints. The model of nonlinear constrained optimization is transformed to a saddle point problem by using Lagrange multipliers. Then Newton - Raphson method is used to solve the resulting problem and these step - by - step solution procedures are programmed in Basic Level II of micro - computer TRS-80. An example which has two linear constraints is solved and the results are analyzed.

• Proceedings of the KIPE Conference
• /
• 2007.07a
• /
• pp.296-298
• /
• 2007

신재생에너지원의 하나인 연료전지 시스템이나 배터리 백업용 전력변환 회로는 많은 응용분야에서 고승압 직류변환장치의 구조로 낮은 입력전압을 높은 출력전압으로 승압한다. 이를 위한 고승압회로의 여러 가지 방식중에서 다단으로 직렬 접속된 구조의 직류변환장치는 복잡하고 비용이 큰 단점이 있다. 또한 높은 출력전압을 얻을 수 있는 플라이백 직류전원장치는 누설성분에 의해 손실이 크므로 효율이 낮고 소자의 스트레스가 큰 단점이 있다. 본 논문에서는 배압회로와 결합 인덕터를 이용한 고승압 전원장치를 제안한다. 제안하는 회로는 24V입력에서 300V로 승압한다. 결합 인덕터의 이차 전압은 배압회로에 의해 정류되고 인덕터의 일차측 승압전압과 병렬로 연결되어 출력전압을 만든다. 높은 승압전압이 낮은 듀티사이클로도 얻어지는 제안 회로는 이론적인 해석과 100W 실험장치를 통해 시험하며 그 타당성을 검증한다.

• Proceedings of the KIPE Conference
• /
• 2015.07a
• /
• pp.409-410
• /
• 2015

본 논문에서는 모바일 기기용 20W급 초박형 어댑터 제작 및 그 실험 결과를 소개한다. 준공진 플라이백 컨버터를 선정하여 전체 시스템을 설계하였으며, 박형 구조를 위하여 두 개의 변압기는 입력-직렬, 출력-병렬 구조로 사용되었다. 설계한 회로를 제작한 결과 케이스 포함 $85.2{\times}58.3{\times}7.7mm$ 3의 부피를 갖는 프로토타입을 완성하였다. 제작 프로토타입은 평균 77.1% 의 효율을 보였으며, 발열 테스트 결과 정상상태에 도달한 케이스 온도는 $63.1^{\circ}C$ 였다.

• The KIPS Transactions:PartD
• /
• v.12D no.2 s.98
• /
• pp.327-334
• /
• 2005

The representation of Web Sites with EMFG(Extended Mark Flow Graph) is studied as a new method that represents the complicated Web Sites structure. The Web Sites usually have the number of iteration structures. The representation of these Web Sites with EMFG is too complicated, and so we can not understand the structure of these Web Sites sometimes. Therefore, in this paper, we classify these iteration structures when express Web Sites by EMFG as serial iteration structures and parallel iteration structures and propose the method that can simplify these iteration structures. Then we can reduce number of boxes, arcs, and transitions, and efficiently design and manage Web Sites by using this method.

• Journal of the Institute of Convergence Signal Processing
• /
• v.8 no.4
• /
• pp.293-296
• /
• 2007

In this paper, we propose the systolic array architecture for the vector median filter. In the color image processing, the vector signal (i.e. the color) consists of three elements, red, green and blue. The vector median filter is very effective to utilize the correlation among red, green and blue elements. The computational complexity of the proposed architecture for computing the vector median of N vector signals is (N+2) clock periods compared to the (3N+1) clock periods in the previous method. In addition to, the input vector signals can be loaded in serial in the proposed architecture. In the previous method, N input vector signals should be loaded to the vector median filter in parallel at the first clock. The proposed architecture is implemented with FPGA.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.22 no.8
• /
• pp.52-58
• /
• 2008

Ths paper describes the Dual-band switch which was proposed new structure that could improved the specification of broadband and designed by the optimized structure through simulation. The Dual-band switch with 2.4[GHz]/5.8[GHz] that can apply to 802.11a/b/g system that is commercialized present was studied to get a new structure with higher power, high isolation. The transmitter of switch was designed to operate a parallel switching element with stack structure of two FET. The receiver designed to have asymmetry structure that insert series FET in addition to basic serial/parallel FET. SPDT(Single Pole Double Throw) Tx/Rx FET switch is a device that can do switching from a port of input to two port of output. The fabricated SPDT switch has the characteristic of insertion loss of a below -3[dB] form DC to 6[GHz] and the isolation of a below -30D[dB](Rx mode).

• The Transactions of the Korean Institute of Power Electronics
• /
• v.16 no.5
• /
• pp.415-429
• /
• 2011

In this study, a single-phase quasi Z-source AC-AC converters with a series connection of the output terminals is proposed. The proposed system has configuration that the input terminals of two quasi Z-source AC-AC converters are connected in parallel and its output terminals are connected in series. The out of phase mode and in phase mode of the proposed system are presented. To verify the validity of the proposed converter, a DSP controlled hardware was made and PSIM simulation was executed. As a result, controlling the duty ratio of the converter, the desired buck-boost output voltages could be generated. For each modes, as compared with the single converter operation, the proposed converter could enhance the efficiency and input power factor according to different loads. Also, in case of the out of phase mode under the constant load, the efficiency and input power factor of the proposed system are increased 10[%], 35[%] respectively in compared with the single converter. And, the output voltage is constantly controlled in dynamic state in case while the load is suddenly changed.