• Proceedings of the KAIS Fall Conference
• /
• 2004.11a
• /
• pp.174-178
• /
• 2004

본 논문에서는 일명 델타변환 무정전전원장치(UPS)로서 알려져 있는 3상 라인 인터랙티브 UPS 시스템의 성능 시험에 대해서 다루고 있다. 델타변환 UPS는 종래의 단일 변환 라인 인터랙티브 UPS 시스템에서 직렬 인덕터를 제거하고 직렬 및 병렬 PWM 컨버터를 사용하는 새로운 라인 인터랙티브 UPS 시스템으로 전원 전류를 직접 제어함으로써 UPS 시스템의 입출력 특성들이 상당히 개선되는 것으로 알려져 있다. 여기서는 UPS 시스템의 성능 시험에서 중요한 내용들인 부하시험, 정전/복전시험, 동기절체 시험 등에 대한 결과들을 제시하고 델타변환 UPS 시스템에 대한 전반적인 평가를 한다.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.42 no.12
• /
• pp.71-78
• /
• 2005

In this paper, we propose a transceiver for noncoherent OOK(On-Off Keying) Ultra Wide Band system based on magnitude detection. The proposed transceiver are designed using 0.18 micron CMOS technology and verified by simulation using SPICE and measurement. The proposed transceiver consist of parallelizer, Analog-to-Digital converter, clock generator, PLL and impulse generator. The time resolution of 1ns is obtained with 125MHz system clocks and 8x parallelization is carried out. The synchronized eight outputs with 2-bit resolution are delivered to the baseband. Impulse generator produces 1ns width pulse using digital CMOS gates. The simulation results and measurement show the feasibility of the proposed transceiver for UWB communication system.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.12 no.5
• /
• pp.400-408
• /
• 2007

In this paper, development of the 8kW parallel module converter is presented. For a effective configuration of FB-PWM converter, this paper proposes 4-parallel operation of 2 kw-module. FB converter of 2-kW module is controlled by phase shut PWM and in order to achieve ZVZCS, the simple auxiliary circuit is applied in secondary side. In order to achieve ZCS, control logic for auxiliary circuit operation is designed to reset the primary current during free-wheeling period. For output current sharing of 4-modules, the charge control is employed. The charge control logic is designed with phase shift PWM logic. Voltage controller is implemented by using DSP(TMS320LF2406) with A/D conversion data of the output current and voltage of each module. The developed converter is installed in PCU(Power Conditioning Unit) for HSG(High Speed Generator) in a vehicle and health monitoring system is implemented for vehicle operation test. Finally, performance of the developed converter is proved under practical operation of HSG.

• Journal of IKEEE
• /
• v.24 no.2
• /
• pp.649-653
• /
• 2020

GPS is a representative satellite navigation system that provides users with accurate location and time information. GPS L1 C / A is opened for civilian and thus utilized in various fields. When the satellite signal reaches the receiver, signal acquisition unit of the digital signal processing hardware searches and acquires the signal among visible satellites. The signal acquisition unit has different implementation methods depending on the signal searching method, such as serial search acquisition, parallel frequency search, parallel code phase search. In this paper, we compare and analyze the three representative acquisition hardwares using live GPS L1 C/A signals. According to the comparison, the parallel code phase search acquisition outperforms the other methods due to reduction of the number of the searchings and a high resolution.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.9 no.5
• /
• pp.995-1001
• /
• 2005

Implicit Integration has become a standard approach to efficient cloth animation, and it guarantees the stability of the system so that large steps can be used. Therefore, it is regarded as the best method for the real-time or interactive animation of cloth. Since the implicit method was introduced for stable cloth animation, various cloth animation techniques based on the method have been proposed. It is now possible to generate the real-time animation of cloth model with thousands of mass-point in general PC environments. Although the implicit method guarantees the stability, the implementation of the implicit method is generally more difficult than that of the explicit method. Even worse, it is very difficult to parallelize the computation process of the implicit method. The cloth animation with implicit method can be formalized as a linear system solving. In this paper we propose an stable and efficient cloth animation techniques based on the implicit method. The proposed method can be easily parallelized. Self-collision is another important issue in cloth animation, we also propose an efficient self-collision avoidance techniques.

• Journal of Internet Computing and Services
• /
• v.7 no.1
• /
• pp.131-141
• /
• 2006

Recently, many researchers have been studied several high performance data transmission techniques such as TCP buffer Tuning, XCP and Parallel Sockets. The Parallel Sockets is an application level library for parallel data transfer, while TCP tuning, XCP and DRS are developed on kernel level. However, parallel socket is not analyzed in detail yet and need more enhancements, In this paper, we verify performance of parallel transfer technique through several experiments and analyze character of traffic interference among socket connections. In order to enhance parallel transfer management mechanism, we predict the number of socket connections to obtain SLA of the network resource and at the same time, affected network bandwidth of existing connections is measured mathematically due to the interference of other parallel transmission. Our analytical scheme predicts very well network bandwidth for applications using the parallel socket only with 8% error.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.37 no.4
• /
• pp.9-16
• /
• 2000

This paper shows the performance of a multiuser detection DS-CDMA receiver based on of the hybrid scheme of parallel interference cancellation (PIC) and successive interference cancellation (SIC). The proposed hybrid interference cancellation is presented and is compared with existing PIC, SIC and Hybrid It of other type schemes. The performance criteria used for comparison are complexity, delay and average bit error rate (BER) performance obtained by simulation in Rayleigh-fading channel (Jake's model) with additive white Gaussian noise (AWGN). In the proposed hybrid IC, the BER performance approximates the one of SIC and the delay is half of the SIC. And the number of cancellation of the hybrid It is reduced about a fourth.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.3 no.1
• /
• pp.1-7
• /
• 1998

Due to the increase in capacity of auxiliary machinery in power plant, the importance of energy saving has been greatly emphasized. If the speed of fans or pumps is controlled in accordance with the variation of load, large electric energy can be saved. Large capacity inverter, 2MVA GTO inverter, has been developed by operating two of 1MVA unit inverters in parallel. The parallel operation of the unit inverter is accomplished through two output transformers of which the secondary windings are connected in series. The system is composed of one control cubicle, one rectifier cubicle and 2 unit inverter cubicles. This inverter system was applied to the sea water lift pump(SLP) driven by a 6.6KV 1500KW induction motor in Seo-Inchon power plant to save the electric energy. The parallel operation of inverters by 180 degrees apart in switching frequency helps to reduce the harmonic components.

• Journal of KIISE:Computer Systems and Theory
• /
• v.34 no.9
• /
• pp.425-434
• /
• 2007

Even though Internet backbone speeds have increased in the last few years due to projects like Internet 2 and NGI, many high performance distributed applications are able to achieve only a small fraction of the available bandwidth. The cause of such problem is due to a character of TCP/IP. The primary goal of this protocol is reliable data transmission. Therefore high speed data transmission didn't be considered when TCP/IP is designed. Hence several researchers have been studied in order to solve the problem of TCP/IP. One of these research results, parallel transfer technique, solves this problem to use parallel TCP connections on application level. Additionally, this technique is compatibility. Recently, these researchers have been studied a mechanism to decide the number of parallel TCP connections. However, some researchers reported the number of parallel TCP connection base on only empirical results. Although hardware performance of host affects transmission rate, the hardware performance didn't be considered in their works. Hence, we collect all data related to transmission rate, such as hardware state information (cpu utilization, interrupt, context switch). Then, we analyzed collected data. And, we suggest a new mechanism determining number of parallel TCP connections for maximization of performance based on our analysis.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2002.11c
• /
• pp.1871-1874
• /
• 2002

최근 인터넷 환경에서 지리 정보 서비스를 제공받으려는 사용자들의 지속적인 증가로 인해 저비용의 여러 개의 단일 노드를 고속의 네트워크로 연결하여 고성능을 제공하는 클러스터 기반의 공간 데이터베이스에 대한 연구가 활발하게 진행되고 있다. 이러한 공간 데이터베이스 클러스터에서 사용자가 요구한 공간 질의를 빠르게 처리하기 위해서는 고비용의 공간 조인 연산을 효율적으로 처리하기 위한 기법이 요구된다. 본 논문에서는 비공유 공간 데이터베이스 클러스터 환경하에서 공간 조인 연산 수행 시 효율적인 병렬 처리를 위한 영역 분할 기법 및 병렬 공간 조인 기법을 제안한다. 기존의 병렬 공간 데이터베이스 시스템에서의 분할 기반 병렬 공간 조인 기법들은 병렬로 수행할 작업 분배 및 할당과 분할 경계선 상에 존재하는 공간 객체들에 대한 중복 조인 연산 및 중복 결과 제거 등의 추가적인 연산을 해야 한다는 문제점들이 있다. 제안된 기법은 공간 릴레이션들을 일정 영역들로 분할하여 비공유 공간 데이터베이스 클러스터의 각 노드에서 중복없이 저장, 관리하도록 하며 분할 영역의 경계선 상에 위치하는 공간 데이터에 대해서만 중복 저장을 허용하여 병렬 공간 조인 연산 시 누락되는 공간 데이터가 없도록 한다. 본 기법은 공간 조인 연산 시 병렬 처리를 위한 별도의 작업 할당 과정을 거치지 않고 각 노드에서 병렬적으로 공간 조인 연산을 수행하며, 분할 경계선 상에 존재하는 공간 객체들은 여과 과정을 거쳐 한번만 공간 조인이 수행되므로 중복 결과들을 제거하기 위한 별도의 연산이 필요없는 특징을 갖는다. Ad Hoc망의 위상변화에 대한 적응성을 높일 수 있도록 한다. SQL Server 2000 그리고 LSF를 이용하였다. 그리고 구현 환경과 구성요소에 대한 수행 화면을 보였다.ool)을 사용하더라도 단순 다중 쓰레드 모델보다 더 많은 수의 클라이언트를 수용할 수 있는 장점이 있다. 이러한 결과를 바탕으로 본 연구팀에서 수행중인 MoIM-Messge서버의 네트워크 모듈로 다중 쓰레드 소켓폴링 모델을 적용하였다.n rate compared with conventional face recognition algorithms. 아니라 실내에서도 발생하고 있었다. 정량한 8개 화합물 각각과 총 휘발성 유기화합물의 스피어만 상관계수는 벤젠을 제외하고는 모두 유의하였다. 이중 톨루엔과 크실렌은 총 휘발성 유기화합물과 좋은 상관성 (톨루엔 0.76, 크실렌, 0.87)을 나타내었다. 이 연구는 톨루엔과 크실렌이 총 휘발성 유기화합물의 좋은 지표를 사용될 있고, 톨루엔, 에틸벤젠, 크실렌 등 많은 휘발성 유기화합물의 발생원은 실외뿐 아니라 실내에도 있음을 나타내고 있다.>10)의 $[^{18}F]F_2$를 얻었다. 결론: $^{18}O(p,n)^{18}F$ 핵반응을 이용하여 친전자성 방사성동위원소 $[^{18}F]F_2$를 생산하였다. 표적 챔버는 알루미늄으로 제작하였으며 본 연구에서 연구된 $[^{18}F]F_2$가스는 친핵성 치환반응으로 방사성동위원소를 도입하기 어려운 다양한 방사성의 약품개발에 유용하게 이