• Economic and Environmental Geology
• /
• v.52 no.6
• /
• pp.627-635
• /
• 2019

Cement-asbestos slate is the main asbestos containing material. It is a product made by combining 10~20% of asbestos and cement components. Man- and weathering-induced degradation of the cement-asbestos slates makes them a source of dispersion of asbestos fibres and represents a priority cause of concern. When the asbestos enters the human body, it causes cellular damage or deformation, and is not discharged well in vitro, and has been proven to cause diseases such as lung cancer, asbestos, malignant mesothelioma and pleural thickening. The International Agency for Research on Cancer (IARC) has designated asbestos as a group 1 carcinogen. Currently, most of these slats are disposed in a designated landfill, but the landfill capacity is approaching its limit, and there is a potential risk of exposure to the external environment even if it is land-filled. Therefore, this study aimed to exam the possibility of detoxification of asbestos-containing slate by using exothermic reaction and heat treatment. Cement-asbestos slate from the asbestos removal site was used for this experiment. Exothermic catalysts such as calcium chloride(CaCl₂), magnesium chloride(MgCl₂), sodium hydroxide(NaOH), sodium silicate(Na₂SiO₃), kaolin[Al₂Si₂O₅(OH)₄)], and talc[Mg₃Si₄O₁₀(OH)₂] were used. Six catalysts were applied to the cement-asbestos slate, respectively and then analyzed using TG-DTA. Based on the TG-DTA results, the heat treatment temperature for cement-asbestos slate transformation was determined at 750℃. XRD, SEM-EDS and TEM-EDS analyses were performed on the samples after the six catalysts applied to the slate and heat-treated at 750℃ for 2 hours. It was confirmed that chrysotile[Mg₃Si₂O₅(OH₅)] in the cement-asbestos slate was transformed into forsterite (Mg₂SiO₄) by catalysts and heat treatment. In addition, the change in the shape of minerals was observed by applying a physical force to the slate and the heat treated slate after coating catalysts. As a result, the chrysotile in the cement-asbestos slate maintained fibrous form, but the cement-asbestos slate after heat treatment of applying catalyst was broken into non-fibrous form. Therefore, this study shows the possibility to safely verify the complete transformation of asbestos minerals in this catalyst- and temperature-induced process.

• Archives of design research
• /
• v.19 no.1 s.63
• /
• pp.293-302
• /
• 2006

clay cups with handles made in studios in Korea and the United States were selected and analyzed. The shape of cup were fixed to ensure proper comparison between handle size of the cup and position. The variable factors were the thickness of the handle, the number of fingers required to hold the cup, the relationship between the handle's shape and the position of its attachment to the cup, the effect of the handle's setter, the change in shape of the handle's thickness, and the relationship between the cup's weight center and handle. Preference test were designed and tested to the users, and the results were analyzed. The results showed that to make a comfortable handle, it is important to incorporate the shape of the resting hand in the design of the handle. Specifically, the design should be such that the cup can be held comfortably. This is possible if the weight of the cup is spread evenly when several fingers are inside the handle's curve and if such factors as the hand size, the curve of the fingers, and the position that best controls the cup's weight center are carefully considered. At this time, if there is a setter for the thumb, a cup of the same weight can be lifted more lightly. In the design of such a cup, the oval line is drawn by extending the cup's handle toward the direction of the cup's body. If the cup's weight center is located on the oval line, the cup's handle may be said to be effective. In such a case, the nearer the handle is to the cup's body weight center, the less power is needed to lift the cup efficiently. Our test results can be applied as a powerful tools in design and manufacturing cups with handle in terms of artistry and functionality.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.50 no.spc1
• /
• pp.19-23
• /
• 2005

This study was carried out to compare the rice quality between domestic brand rice and imported Chinese rice. In the appearance of grain, head rice rates were $96.1\%$ in domestic brand rice (Ilpumbyeo), $94.1\%$ in Jingguan (Chinese brand rice) and $86.5\%$ in Xiaozhandao(Chinese brand rice). In case of Chinese parboiled rice, the head rice rate was $0\%$ because the cracked and broken rice occupied about $95.5\%$. The low protein contents in Ilpumbyeo and Xiaozhandao as 6.5 and $6.7\%$ show relatively high palatability as 81.9 and 71.4. However, high protein contents in Jingguan and Chinese parboiled rice as 7.5, $7.4\%$ show low palatability as 64.3 and 55.6. In viscosity characteristics, peak viscosity, break down and final viscosity were higher in Ilpumbyeo and Xiaozhandao, midium in Jingguan and lowest in Chinese parboiled rice. And the set back value, which was negatively related with amylose content, was lowest in Ilpumbyeo and highest in Chinese parboiled, suggesting slow deterioration in Ilpumbyeo and rapid deterioration in Chinese parboiled rice. Overall physical components of cooked rice measured by Texture Analyser were higher in Ilpumbyeo than those in Chinese parboiled rice.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.26 no.4
• /
• pp.405-417
• /
• 2010

Previous studies have already shown that mouthguard is effective in protecting jaw bone, teeth and oral tissue against sports trauma. However, other than severe trauma, repetitive force, such as disorders like clenching, cause teeth or oral tissue damage. These kinds of disorders usually present pathologic attrition in the posterior teeth, resorption in alveolar bone, loss of teeth and destruction of occlusion. Wearing a mouthguard is believed to be effective in preventing these disorders. But its effect is not examined thoroughly enough. The purpose of this study is to identify whether mouthguard is effective in reducing strain caused by clenching. Mandibular first molars in the normal occlusal relationship without any history of dental treatment were chosen. Biaxial type strain gauge was placed on the buccal surface of the tooth. Having maximum occlusal force, measured by load cell, as a standard, clenching intensity were divided into three stages; moment of slightly tooth contact, medium bite force (50% of maximum bite force), maximum bite force. Strain occurring in dentition in each stage with and without mouthguard was measured. Changes in strain (on dentition) between each stage and difference in strain, between with or without mouthguard were recorded by PCD-300 analyzer and PCD-30 soft ware. The data was statistically analyzed by Wilcoxon signed rank test. The following results were drawn; Without mouthguard, strain given on dentition increased as the clenching force increased. With mouthguard, strain given on dentition also increased as the clenching force increased. With mouthguard, strain decreased, in all cases of clenching force stages. Data on the moment of slightly tooth contact stage, had no statistical significance. However, with mouthguard, 50-90% of decrease in strain could be obtained in maximum occlusal force, compared to the group without mouthguard. Mouthguard decreased the strain on the dentition, caused by clenching. Therefore, mouthguard seems to be effective in preventing damage on dentition, by acting against clenching, which occurs both consciously and unconsciously during sports activities.

• Journal of the Korean Geophysical Society
• /
• v.3 no.2
• /
• pp.99-112
• /
• 2000

The Iksan Jurassic Granite shows relatively less fractures and homogeneous rock fabrics, and is one of the most popular stone materials for architectures and sculptures. Almost mutually perpendicular rift, grain, and halfway in the Iksan Jurassic Granite are well known to quarrymen based on its splitting directions, and therefore it should exhibit orthorhombic symmetry. Theoretically, there are 9 independent elastic stiffness coefficients $(C_{1111},\;C_{2222},\;C_{3333},\;C_{2323},\;C_{1313},\;C_{1212},\;C_{1122},\;C_{2233},\;and\;C_{1133})$ for orthorhombic anisotropy. In order to characterize the static and dynamic elastic properties of the Iksan Jurassic Granite, triaxial strains under uniaxial compressive stresses and ultrasonic velocities of elastic waves in three different polarizations are measured. Both experiments are carried out with six directional core samples from massive rock body. Using the results of experiments and the densities measured independently, the static and dynamic elastic coefficients are computed by simple mathematical manipulation derived from the governing equations for general anisotropic media. The static elastic coefficients increase ar uniaxial compressive stress rises. Among those, the static elastic coefficients at uniaxial compressive stress of a 24.5 MPa appear to be similar to the dynamic elastic coefficients under ambient condition. Although some deviations are observed, the preferred orientations of microcracks appear to be parallel or subparallel to the rift, the grain, and the hardway from microscopic observation of thin sections. This indicates that the preferred orientations of microcracks cause the elastic anisotropy of the Iksan Jurassic Granite. The results are to be applied to the effective use of the Iksan Jurassic Granite as stone materials, and can be used for the non-destructive safety test.

• Korean Journal of Heritage: History & Science
• /
• v.38
• /
• pp.329-358
• /
• 2005

The Three storied Stone pagoda in Gameunsa Temple site, one of the early staged stone pagodas, has been known as a standard for Silla stone pagodas. A stone pagoda is not only a stone art work and but also a stone structure. Most studies and investigation of the stone pagoda has done mainly based on style and chronological research according to an art historical view. However, there is not an attempt to research the stone pagoda as a stone architecture. Most Korean experts at the stone pagoda has art history in their background. Engineers who can understand the structure of the stone pagoda are very limited. More architectural and engineering approach is need to research not only art historial understanding but also safety as a structure. We can find many technical know-how from our ancestors who made stone pagodas. 1. To reduce any deformation such as relaxation and sinking of BuJae which is caused by a heavy load, the BuJae (consist of a foundation stone and lower stereobates) should be enlarged. 2. A special construction method for connection between Myonsuk and Tangjoo was invented. This unique method is not used any longer after the Three storied Stone pagoda in Gameunsa Temple site. 3. The upper BuJae and the lower BuJae are missed each other by making a difference of Okgaesuk and Okgaebatchim in size. It is done for a distribution of perpendicular load and a prevention for relaxation of BuJae. 4. The center of gravity in the BuJae is located to the center of the stone pagoda by trimming the upper surface of the Okgaebatchim into a convex shape. The man who made stone pagodas had excellent knowledge on the engineering and techniques to understand the structure of the stone pagodas. We can confirm it as follows: the enlarged BuJae, dislocated connection between upper Bujae and lower BuJae, and moving the center of gravity close to the center of the stone pagoda.

• Journal of Korea Entertainment Industry Association
• /
• v.14 no.3
• /
• pp.201-210
• /
• 2020

The aim of this thesis is to investigate exhibition spaces which are being expanded and transformed concurrently with social phenomena that are also the result of rapid changes, all of which are reflective of a modern society in transition. Such investigation would also include an analysis of changes in the viewing public and artworks themselves, and also an assessment of the public nature of art and its effective aspects. Expansion of exhibition spaces and the increasing connection between art and the public have very important ramifications, in many respects. They present opportunities for the viewing public to immerse themselves in artistic spaces, with some reaching further into other activities - activities that they often share with other individuals. This also leads them to expand their range of activities, turning them into more mobile, proactive audiences. In connection, many corporations have turned their attention to this public aspect of art, which has resulted in a display of art in different types of spaces. The government also began to adopt 'public art' as a matter of policy, using it as a medium of communication between the state and its populace. The public aspect of art, being highlighted as a result of expansion and diversification of exhibition spaces, will have a significant impact not only on the viewing public, but also on the art market. This represents a momentous change for creators of art, which naturally warrants close scrutiny and research.

• The Journal of Korean Philosophical History
• /
• no.27
• /
• pp.223-254
• /
• 2009

This thesis is aimed at researching the formation of democracy in socialist China. Due to a sense of cultural superiority on the basis of their developed civilization, they already formed a strong cultural nationalism, which has come to firm up into "Sinocentrism" through long periods of time. However, there arose a sense of crisis due to the Western invasion after the Opium War and the intellectuals in China happened to seek the solution to rescuing their mother land from ruin; in the midst of this process, the theory of social evolution of the West was introduced and accepted. The acceptance of this theory of social evolution gradually transformed in confrontation with a logical limit that China defeated in international competition could not but be plundered by imperialism after all, but it contributed to Chinese intellectuals' forming the concept of the modern state nationalism of the West deviating from cultural Sinocentrism. After the Russian Revolution, a large number of Chinese progressive intellectuals developed their socialist movement with the recognition that Marxism was a practicable alternative to rescue China from its crisis. The Chinese Communist Party was under guidance of the Comintern from the early process of its formation, in which they emphasized the fact the national liberation struggle in colonialized countries was an indispensable element in the world communist movement under the condition of the control of the world by imperialist capital at that time and subsequently, Marxism characterized by resistant nationalism in China gained its cause. Afterwards, the People's Republic of China was established by the Chinese Communists which came to get widespread support from the Chinese through anti-imperialism &feudalism in the process of the Sino-Japanese War, and thus China equipped with a full-blown socialism system set sails. However, with the relations with the Soviet Union getting worse under the international conditions of a cold war, the development of the Chinese socialism couldn't but resort to the concentrated power of its people, which was linked to the boost of continuous patriotism of the Chinese Communists. Particularly, due to the newly-emerging contradictions after reform & opening [gig kifng], China underwent disruption; thus, as an ideology to integrate such disruptive elements, Sinocentrism based on China's cultural pride re-appeared. Recently, a very strong form of Sinocentrism has come to the fore as their superiority of traditional cultures is emphasized in China whose international position as an economic power has been raised.