• Journal of Korean Tunnelling and Underground Space Association
• /
• v.7 no.3
• /
• pp.249-257
• /
• 2005

There are basically two methods for the seismic design of underground structures ; analytical or pseudo-static, and dynamical method. In pseudo-static analysis approach, the ground deformations are imposed as a static load and soil-structure interaction does not include dynamic or wave propagation effects. However the behavior of soil structure interaction is nonlinear, it needs to consider nonlinear soil-structure interaction effects. In this study simplified seismic analysis method to consider soil-structure interaction by iterative procedure is proposed and the results are compared and analyzed by a finite difference computer program.

• Computational Structural Engineering
• /
• v.10 no.4
• /
• pp.131-142
• /
• 1997

In this paper the kinematics of damage for finite elastoplastic deformations is introduced using the fourth-order damage effect tensor through the concept of the effective stress within the framework of continuum damage mechanics. Unlike the approach of strain equivalence or energy equivalence, which is applicable only to small strains, the proposed kinematic description provides a relation between the effective strain and the damage elastoplastic strain in finite deformation. This is accomplished by directly considering the kinematics of the deformation field both real configuration. The proposed approach shows that it is equivalent to the hypothesis of energy equivalence at finite strains. The damage effect tensor in this work is explicitly characterized in terms of a kinematic measure of damage in the elastoplastic domain through a second-order damage tensor.

• Journal of the korean Society of Automotive Engineers
• /
• v.18 no.4
• /
• pp.67-87
• /
• 1996

본 연구에서는 차체의 충돌해석 및 모델링을 위하여 판/쉘 요소의 자동생성 모듈을 개발하고 재료의 변형특성 모델링 모듈 및 접촉처리 모듈을 개발하였다. 충돌해석용 전처리기능으로는 평면, 실린더 곡면, B-스플라인 곡면 및 블렌딩 (blending) 곡면상에서의 사각형 요소망 자동생성 기법과 프로그램을 개발하였다. 또한 차체를 구성하고 있는 여러가지 재료들의 변형거동을 모델링하여 개발중인 충돌해석전용프로그램인 Autocrash의 모듈로서 완성하였다. 이들은 변형률속도의 영향이 고려된 탄소성 재료, 강체 재료, 포옴 재료 및 이방성 재료등으로 정면충돌 해석 및 측면충돌 해석에 필요하다. 한편 접촉처리 모듈에서 접촉탐색법으로는 주종탐색법과 HITA 알고리즘을 병행하여 사용할 수 있도록 프로그래밍하였으며, 불침투 조건의 처리는 벌칙함 수법을 이용하였다.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2002.04a
• /
• pp.512-519
• /
• 2002

본 연구에서는 임의의 형상의 다중세포 단면을 갖는 복합재료 블레이드에 대한 유한요소 구조해석을 수행하였다. 보 해석 모델은 구조연성 효과와 단면 벽의 두께, 횡 전단변형, 비틀림과 연관된 워핑 및 워핑구속효과 등을 고려하고 있다. 블레이드 힘-변위 관계식은 Reissner의 반복족에너지 함수를 이용한 혼합이론을 적용하여 유도하였다. 이 관계식은 굽힘 및 전단에 대해서는 Timoshenko 보의 형태로 그리고 비틀림 변형은 Vlasov 이론으로 근사하고 있다. 결과적인 [7×7] 구조강성 행렬은 전단변형 및 전단강성계수들을 특이한 가정에 의존하지 않고도 해석적으로 기술하고 있다. 본 정식화 과정을 통해서 구한 보 이론을 이중세포로 구성된 에어포일 형상의 복합재료 블레이드에 적용하였으며, 기존의 실험 연구 및 다차원 유한요소해석 결과들과 비교 연구를 수행하여 본 해석모델의 타당성을 보이고자 하였다.

• Journal of the Korean Geotechnical Society
• /
• v.16 no.5
• /
• pp.5-17
• /
• 2000

등가선형이론을 이용한 지진응답해석은 사용의 간편함 때문에 많이 사용되고 있지만, 대부분의 입력 정수들이 경험식에 의해 얻어지고 있어 심각한 오류를 발생시킬 여지가 있다. 입력정수를 실험의 결과로부터 얻을수 없다면 합리적인 방법을 통하여 입력 정수를 결정하여야 하며, 또한 입력 정수들이 해석결과에 어떠한 영향을 미치는지에 대한 고찰이 필요하다. 따라서 본 연구에서는 입력정수가 해석결과에 미치는 영향에 대한 민감도 분석을 실시하였다. 해석은 등가선형화 이론에 기초하여 개발한 액상화 해석프로그램(KLIq)을 이용하였다. 검토된 사항은 전단탄성계수와 감쇠비의 영향, 변형률의 영향, 반복계산에서 유효변형률 결정방법, 최대전자탄성계수의 영향, 변형률 의존곡선(자반의 종류)의 영향, 입력 지질파의 영향 등이다.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.38 no.7
• /
• pp.719-725
• /
• 2014

In the present study, a numerical analysis of an injection molding process was conducted for predicting the mold deformation considering non-Newtonian flow, heat transfer, and structural behavior. The accurate prediction of mold deformation during the filling stage is important to successfully design and manufacture a precision injection mold. While the local mold deformation can be caused by various factors, a pressure induced by the polymer melt is considered to be one of the most significant ones. In this regard, the numerical simulation considering both the melt filling and the mold deformation was carried out. A mold core for a 2D axisymmetric center-gated disk was used for the demonstration of the present study. The flow behavior inside the mold cavity and temperature distribution were analyzed along with the core displacement. Also, a Taguchi method was employed to investigate the influence of the relevant parameters including flow velocity, mold core temperature, and melt temperature.

• Journal of the Society of Disaster Information
• /
• v.7 no.3
• /
• pp.206-219
• /
• 2011

The important elements in pavement design criteria are the stress and strain distributions. To obtain reasonable stress and strain distribution, tire contact area and tire pressures are very important. This study presents a viscoelastic characterization of flexible pavement subjected to moving loads. During the test, both longitudinal and lateral strains were measured at the bottom of asphalt layers and in-situ measurements were compared with the results of numerical analysis. A 3-dimension finite element model was used to simulate each test section and a step loading approximation has been adopted to analyze the effect of a moving vehicle on pavement behaviors. For viscoelastic analysis, relaxation moduli, E(t), of asphalt mixtures were obtained from laboratory test. Field responses reveal the strain anisotropy (i.e., discrepancy between longitudinal and lateral strains), and the amplitude of strain normally decreases as the vehicle speed increases. In most cases, lateral strain was smaller than longitudinal strain, and strain reduction was more significant in lateral direction.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.12 no.2
• /
• pp.105-116
• /
• 2010

The estimation of surface settlement, ground behavior and tunnel displacement are the main factors in urban tunnel design with shallow depth and unconsolidated soil. On deformation analysis of shallow tunnel, it is important to identify possible deformation mechanism of shear bands developing from tunnel shoulder to the ground surface. This paper investigated the effects of key design parameter affecting deformation behavior by numerical analysis using nonlinear model incorporating the reduction of shear stiffness and strength parameters with the increment of the maximum shear strain after the initiation of plastic yielding. Numerical parametric studies are carried out to consider the reduction of shear stiffness and strength parameters, horizontal stress ratio, cohesion and shotcrete thickness.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.40 no.11
• /
• pp.957-962
• /
• 2012

Fluid/structure interaction (FSI) analysis is necessary to predict the response of a system in which aerodynamic pressure causes deformation of the structure, and vice versa. In dealing with a nonlinear behavior of the structure, however, a simple iterative algorithm of aerodynamic analysis with structural analysis yields no accurate results since aerodynamic pressure need to be changed in accordance with the deformation of structures. In this study, we explore an efficient and accurate method for integrating FSI analysis into structural nonlinear systems. During the course of nonlinear structural analysis, loading conditions are periodically updated by aerodynamic analysis. The accuracy and efficiency of the method is demonstrated with a high-aspect-ratio flexible wing of Global Hawk.

• Journal of the Society of Naval Architects of Korea
• /
• v.37 no.2
• /
• pp.127-136
• /
• 2000

Welding deformations reduce the accuracy of ship hull blocks and decrease the productivity due to correction work. Preparing an error-minimizing guide at the design stage will lead to a high quality as well as high productivity. And a precise method to predict the weld deformation is an essential part of it. This paper proposes an efficient method to predict complicated weld deformations based on the inherent strain theory combined with the finite element method. The inherent strain is determined by the highest temperature and the degree of restraint. In order to calculate the inherent strain exactly, it is considered that the degree of restraint becomes different according to the fabrication stages in real structures. A simulation of a stiffened plate shows the applicability of this method to simple ship hull blocks.